Has any one used the verizon iPad in Italy with a local data plan?

I am plannign a trip to Italy. I have a VZ ipad 3rd gen. I would liek to use a local data SIM for Italy. VZ is $25 for 100MB. I think TIM is about 9 eoro for 1GB.

I can think of a couple of ways to do this. For small volume applications you could hard code the expiration date into the application prior to the build. At startup you could then check for a valid reistration code (this could be coded into an ini file) and then, if not registered, perform the appropriate task depending on whether the period has expired. You may also want to check during operation (say, for instance, every hour) to prevent continued use of the program by leaving it running. You could put a button on the front panel which is active an visible only if the program is not registered to allow for writing the registration code.
The second way is to include the start data in the ini file and have the evaluation period hard coded. This method is l
ess secure, although you could invent an encryption style for the date. Otherwise implementation would be similar.
I'm not familiar with the 1way.dll software so I can't give you any guidance on how well that approach would work.

Similar Messages

1way.dll Has any one used the following

I want to use a Copy right/evaluation program or dll, to give a limited trial period for an application written in Labview 6.1. Has any body used or has any good ideas for controlling such functions. I was going to try 1way.dll software but don't know how labview will cope with calling this dll. I would like to offer the client the ability to obtain a serial number for continued use.

I can think of a couple of ways to do this. For small volume applications you could hard code the expiration date into the application prior to the build. At startup you could then check for a valid reistration code (this could be coded into an ini file) and then, if not registered, perform the appropriate task depending on whether the period has expired. You may also want to check during operation (say, for instance, every hour) to prevent continued use of the program by leaving it running. You could put a button on the front panel which is active an visible only if the program is not registered to allow for writing the registration code.
The second way is to include the start data in the ini file and have the evaluation period hard coded. This method is l
ess secure, although you could invent an encryption style for the date. Otherwise implementation would be similar.
I'm not familiar with the 1way.dll software so I can't give you any guidance on how well that approach would work.

Has any one used the program mac keeper

Found a program called Mac Keeper but I want to hear from people that are not on their web page if it really works.

It sounds like your Mac does not have the correct processor for Lion. There always has to be a cutoff somewhere.
Is there anything your Mac is not doing for you?
If it works for you then use it.
No need to whining and moan to us about it.
IMHO you should consider yourself extremely luck to have been able to use MacKeeper without any problems.
I recommment that MacKeeper be avoided at all cost. It charges you to do thing that you can with the operating system for free.
Allan

Has any one used DocumentBurster/PdfBurster?

Has any one used DocumentBurster/PdfBurster?
http://www.pdfburst.com/
I need some help in configuring the Email parameters inside the tool?

DocumentBurster documentation on [how to distribute reports by email is available here|http://www.pdfburst.com/docs.html].

Any one used the interface /RPM/IF_PFS_ITEM and form /RPM/FORM_PFS_ITEM

Hi Friends,
Any one used the above interface and form
Regards,
sasidhar

Hi Karen,
It seems to me that because the decision point happens before the tabular form is rendered (via the tree right?) you don't really need a "On Change" DA.
I think you either need find the hms field c030, which could be hidden or visible, as depending on that value go hide or show the hms_info field.
You'll want to do this either on Page Load or After Refresh or both, it depends on how the tabular form gets refreshed.
Your DA On Load would be
Event: Page Load
Action: Javscript Code
The code:
$(".hms").each(function(index) {
if ($v(this) == 'N') {
var rowTR = $x_UpTill(this, 'TR');
$(rowTR).find(".hms_info").hide();
This code will find ALL your hms fields. if the field has a N then we go up to the TR, find the hms_info and hide it.
If your page refreshes on every row and the Y/N values don't change after the page loads then you're done!
What do you think?
Thanks
-Jorge
PS. This is odd... I thought I was replying to the previous thread. Weird.
Message was edited by: jrimblas

Has any one used Safari with TreasuryDirect?

TreasuryDirect is asking for "A Web Browser That Supports 128-Bit Encryption". I cannot find any information about Safari's encryption capabilities. Has any one used Safari at TreasuryDirect?
Thanks gameMan

Hi,
Safari does support 128-bit encryption, as mentioned on this page:
http://www.apple.com/macosx/features/safari/
"Safari also uses strong 128-bit encryption when accessing secure sites such as your bank or an online store, so you can transmit account and payment information with confidence."
I can't comment on TreasuryDirect however - hopefully someone else can answer that part

Any one use an Apple MA034 external modem with PowerbookG4 running Tiger?

any one use an Apple MA034 external modem with PowerbookG4 running Tiger?

Not too common with G4 PowerBooks as they have an internal modem. I can't find Apple's sepcs but a third-party ad shows it minimally needs 10.4.3 or higher and a G-series processor. That should work.
However, the Apple version is expensive used. I googled Apple MA034 external modem and found an Amazon page that showed other compatible modems that were much cheaper.

Will using the original ipad (1) charger with the new ipad (3) hurt the new ipad?

will using the original ipad (1) charger with the new ipad (3) hurt the new ipad? I accidentally did this for a minute and then unplugged it and plugged in the new charger to it.did I hurt the new ipad?

No. It's the same charger.

Can I use my Verizon iphone6 in Australia with a local sim card?

Can I use my Verizon iphone6 in Australia with a local sim card?

Idiz, Oh wow, a trip to Austrailia - how exciting! I have great news! All of our 4G LTE phones are unlocked for our customers. You will be able to use a local Global SIM card with your device while traveling Internationally. Here's more information surrounding our Device Unlock policy http://bitly.com/1BDQy5r .
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Can i use the verizon ipad 2 from US in indonesia and change the carrier

my brother bought me an iPad 2 wifi+3g from US and gave it to me in indonesia. i ccan't find the sim card slot, and when i checked out the carrier in general settings it showed verizon 10.0. can i just change the carrier? because i really want to use the 3g connections.i will really appriciate if you can help me.. sorry for my terrible english btw

You can give points by clicking on "helpful" or "correct" in the answers you like. :-)
There are CDMA networks in some parts of South Korea and Japan, I've been told, but they can't work with the iPad (someone posts that back when Verizon first offered the iPad, can't remember when). The CDMA IPad will only work with Verizon in the US.

Has any one used it with gear/watch

just wording if any one has tryed this yet?

Hi,
Safari does support 128-bit encryption, as mentioned on this page:
http://www.apple.com/macosx/features/safari/
"Safari also uses strong 128-bit encryption when accessing secure sites such as your bank or an online store, so you can transmit account and payment information with confidence."
I can't comment on TreasuryDirect however - hopefully someone else can answer that part

Has any one used HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_acct_site?

I am using the following procedure to activate the account site but it doesn't work.
Does anyone has a psuedo code?
HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_acct_site

l_cust_acct_site_rec.cust_acct_site_id := 1298; --l_cust_acct_site_id;
l_cust_acct_site_rec.status := 'A';
--and passing the right version number
APPS.HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_acct_site
p_init_msg_list => 'T',
p_cust_acct_site_rec => l_cust_acct_site_rec,
p_object_version_number => l_object_version_number,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data
);

Coresuite - has any one used this ? if so what do you think

has anyone used the Coresuite from
http://www.coresuite.ch/
if so what do yu think of it?

We had a closer look at the "coresuite framework" as we had a similar approach to connect small add-ons to B1 via an interface component which held a single connection to B1.
But most of their other components seem to run outside B1 client (??) which is why we didn't try it out...
Have you tried it out? If so what do you think?

HAS any one used a 50 ch DMM for resistance measurement?

What i'm trying to do is simple, i'm trying to monitor 50 channels or should i say 50 points of resistance measurement and then datalogging a change but i have a restriction and that is the sampling rate. i can't use a realy since there is a DEBOUNCE issue so i'm stuck right now on this. i have to pretty much scan a 50 channels in 20uS or less and then logg everything that changes. please help thanks.

Hi CrukZ,
I am NOT a "hardware" person, but recently researched this subject and (with a hardware person) built a shorts-test station. One solution that I/we considered was to use an analog DAQ board. We'd have put some voltage - say 5V - on a buss, then branched off the buss with 50 individual high-precision resistors - one to each testpoint (one input goes straight to the ?V buss). The DAQ board does a single-ended voltage measurement at each test-point - the mid-point of a voltage-divider - and use the measured voltage to calculate current and/so resistance. Two 1.25MHz DAQ boards (triggered together), at 25-channels each, would get the DAQ-rate you're after.
You'd have to play with the test-voltage and resistor choices depending on the current/voltage specs of your device. I think the closer the series resistor matches expected DUT resistance, the better it is for the calcs, but then really low resistance means higher current so it's "a balancing act". The more expected resistance varies, the worse it is for the calcs.
In our case, the tested circuits included diodes and current didN'T change linearly with test-voltage. However, we successfully emulated a hand-held Fluke DMM @1.2V on the 400 ohm scale. Done-deal!
BTW, I won't feel bad if someone describes why this is a terrible idea.
I am NOT a hardware guy person
When they give imbeciles handicap-parking, I won't have so far to walk!

Any one using the Lacie d2 Quadra USB 3

I was wondering if anyone was using the Lacie d2 Quadra USB 3 Drive. If so, I was also wondering if the included management software can be deleted and just manage the drive via Disk Utility.
I just bought an OWC Mecury Elite Pro. I like it, except for the fan noise.

I have 4 of models with USB 2.0 which are almost identical. When you connect to the Mac for the first time the Lacie will sense it's connected to OS X and format correctly. After that simply forget about software or re-format the drive (Mac OS Extended (Journaled)) in Disk Utility and that will wipe the drive clean.
Congrat's on getting the drive, I have had mine for 4.5 years with no issues at all.

Has any one used the verizon iPad in Italy with a local data plan?

Similar Messages

Maybe you are looking for