Has any one work with more than 9 clips to make a multiclip

Hello
Im working on a one live man show that had four cameras running time of day time code.
The cameras all ran at the same speed and had gotten the tc correct.
Because of the tape reloads due to length of show and a few camera stop and starts I loaded into final cut about 4 clips for each camera.
Each clip is between 5 to 20 min.
With four cameras running Ive ended up with 13 clips total.
I assigned each camera its own angle
I would like to see each camera as its own angle and end up with only four clips in my multiclip, instead of getting 13 different clips.
Also is their a way to simply toggle thru each multiclip both in viewer and canvas by just using the up or down arrows, instead of the key pad for each camera.
For now my work around is to make several multiclips by breaking the show into several parts.
Thanks for you interest
Mark L Levine
PowerPC G5 Mac OS X (10.4.5)

Wow, you guys perceived and answered an entirely different question than I did. I do not see the problem here at all, it's just like creating three nests; three four-camera multiclips that butt up against each other. (There is one extra angle, number 13, dunno how it fits in but it's obviously one extra short clip for one of the cameras.) This all depends on the statement "The cameras all ran at the same speed and had gotten the tc correct."
Capture the four camera into three clips each with a little bit of overlap. Create the multiclips using timecode, drop them into the timeline and line them up with timecode, and cut till you're blue in the face or happy with the results.
While it's possible to create and assign shortcuts to all of the keys, the prebuilt layout for multiclip is very cool and it's all set to go.
Hello Im working on a one live man show that had four cameras running time of day time code.
The cameras all ran at the same speed and had gotten the tc correct. Because of the tape reloads due to length of show and a few camera stop and starts I loaded into final cut about 4 clips for each camera.
Each clip is between 5 to 20 min.
With four cameras running Ive ended up with 13 clips total. I assigned each camera its own angle I would like to see each camera as its own angle and end up with only four clips in my multiclip, instead of getting 13 different clips. Also is their a way to simply toggle thru each multiclip both in viewer and canvas by just using the up or down arrows, instead of the key pad for each camera. For now my work around is to make several multiclips by breaking the show into several parts.
<

Similar Messages

Has any one worked with PooledPreparedStatement in apache dbcp package ?

Has any one worked with PooledPreparedStatement in apache dbcp package ?
Is there a sample ? Can you share the code
Raees

Hi Rahul,
I am not an expert in this matter, but i think i can share some info.
SAP Fiori uses a very different development approach using SAPUI5 (HTML5/Javascript/CSS etc).
I really don't know if there is a way to migrate WDA with your intent, it seems more like a redesign of your applications using the SAPUI5 resources, which can result in a reasonable amount of effort, depending on your WD applications quantity, complexity, size and other several factors.
It has to be sized very carefully, and the new designs must be based on a solid software modelling that suits and leverages the advantages of the SAPUI5 framework.
There is much content to venture into, you can search for SAPUI5 tutorials/info, or add it with Fiori.
Here is an example of interesting content from last year:
What SAPUI5 and Fiori tells us about the future of UI development skills
Hope it helps you, i am also studying these topics, please feel free to correct my mistakes.
Regards,
Renan

Has any one worked on sharepoint 2013 workflows using visual studio.

Has any one worked with sharepoint 3013 workflows using visual studio.

Hi,
To develop SharePoint 2013 workflow using Visual Studio, you can refer to:
Develop SharePoint 2013 workflows using Visual Studio
Create a SharePoint workflow app using Visual Studio 2012
Get started with workflows in SharePoint 2013
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

Working with more than one ALV on Screen

Hi,
I have got two alv's in same application/report. One ALV is for displaying the data and another ALV is for interaction or with EVENT Handling, but when iam defining the class with methods for event handling for CL_GUI_ALV_GRID, it is showing me an error message as there are more than one ALV with reference to CL_GUI_ALV_GRID. It seems it wants only UNICODE Object for CL_GUI_ALV_GRID.
Please assit, how to manage with event handling when there are more than one ALVs on screen. How to go for class definition and implementation

If you are dealing with two ALV, you should have created two different objects referring to CL_GUI_ALV_GRID.
If you have done and still getting a error, please post the code that is erroring here.
Regards,
Ravi
Note - Please mark all the helpful answers

Working with more than one spreadsheet

I use Numbers a lot but it's occurred to me that I've not yet tried working with numerous spreadsheets.
Can Numbers grab information from a separate spreadsheet or does everything have to be worksheets within a single spreadsheet?

Darryn,
One Numbers Docment (Filename) can not communicate with another Numbers Document. Multiple Sheets within one Document may reference each other. So, if you wish, you can embed your spreadsheets on separate Sheets within the same Document and have them link to each other.
Jerry

Will hp2543 work with more than one wifi connection it works at office but not at home

New printer set up to work with wifi at office but it doesn't work at home. Will it work at 2 or more locations and if so how do you set it up

Hi,
Yes BUT each location you have to set it up like a new printer and you have to switch forward backward on every move.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Apex 4.0 tree does not work with more than 2 levels.

When I have more than 2 levels in my tree, I only see the root node. The query works fine and returns 132 rows when I run it in SQL. It is just the tree that does not work.
The same tree when built in 3.2 works fine.
This is my tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"NAME" as title,
null as icon,
"ID" as value,
null as tooltip,
null as link
from (
SELECT '__TOP_NODE__' id
, NULL pid
, 'BI Applications' name
, '' link_id
, null a1
     , null a2
FROM dual
1 b) BIA Modules
UNION ALL
SELECT '__MD_'||module_key id
, '__TOP_NODE__' pid
, module_name name
, module_key link_id
, '__MD__' a1
     , null a2
FROM c_bia_module
Level = 2
Parent = Module
Node = Functional Areas
ID = '__FA_' prefixing functional area code
UNION ALL
SELECT '__FA_'||funcarea_key id
, '__MD_'||module_key pid
, funcarea_name name
, funcarea_key link_id
, '__FA__' a1
     , null a2
FROM c_functional_area
Level = 3
Parent = Functional Area
Node = Fact Group
ID = '__FG_' prefixing fact group key
UNION ALL
SELECT '__FG_'||factgroup_key id
, '__FA_'||funcarea_key pid
, factgroup_name name
, factgroup_key link_id
, '__FG__' a1
     , null a2
FROM c_fact_group
start with "PID" is null
connect by prior "ID" = "PID"
order siblings by "NAME"
If I reduce the query to just use two levels like:
SELECT '__TOP_NODE__' id
, NULL pid
, 'BI Applications' name
, '' link_id
, null a1
     , null a2
FROM dual
1 b) BIA Modules
UNION ALL
SELECT '__MD_'||module_key id
, '__TOP_NODE__' pid
, module_name name
, module_key link_id
, '__MD__' a1
     , null a2
FROM c_bia_module
It works fine. Can somebody let me know what I am doing wrong? Is there a way to set the number of levels supported in 4.0?

Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary

Can I have more than one ipod with more than music library on one computer

I was just wondering if i could have 2 different ipods (one a 5th generation and the other ipod touch) with 2 different music libraries on the same computer and itunes? because right now im using my parents computer and my fiance is using my laptop and we're moving so we'll only have one computer in the next few weeks. So if anyone could try to give me an answer or have a solution that would be fantastic lol!

See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
Multiple iPod installations.
How to use multiple iPods with one computer.
If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
This will give you the option of either using the current iTunes library or creating a new one.
There are various methods of transferring different songs to different iPods with a single iTunes library.
One is to manage the songs manually.
With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

Any one worked with SAP Fiori Or Personas

Hi Experts
Can you please let me know if any one of you have used SAP Fiori or Personas.
I have a ABAP Webdynpro application and Client has a question if we can migrate similar things to Fiori or Personas.
More intrested for Fiori as it can be used via mobiles as well.
Thanks in Advance
Rahul
Tags edited by: Michael Appleby

Hi Rahul,
I am not an expert in this matter, but i think i can share some info.
SAP Fiori uses a very different development approach using SAPUI5 (HTML5/Javascript/CSS etc).
I really don't know if there is a way to migrate WDA with your intent, it seems more like a redesign of your applications using the SAPUI5 resources, which can result in a reasonable amount of effort, depending on your WD applications quantity, complexity, size and other several factors.
It has to be sized very carefully, and the new designs must be based on a solid software modelling that suits and leverages the advantages of the SAPUI5 framework.
There is much content to venture into, you can search for SAPUI5 tutorials/info, or add it with Fiori.
Here is an example of interesting content from last year:
What SAPUI5 and Fiori tells us about the future of UI development skills
Hope it helps you, i am also studying these topics, please feel free to correct my mistakes.
Regards,
Renan

CONVERT_OTFSPOOLJOB_2_PDF is not working with more than 200 pages

HI all,
i am trying to print out Inspection Results (OTFs generated by QGA3 Transaction) via the CONVERT_OTFSPOOLJOB_2_PDF funtion module.
But if the Inspection Results have more than 200 pages the FM only creates a PDF without content.
The PDF is there but it has 0 bytes.
This is how i fill the FM:
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
         EXPORTING
              src_spoolid              = i_spool
              no_dialog                = 'X'
         IMPORTING
              pdf_bytecount            = wl_numbytes
              pdf_spoolid              = wl_pdfspoolid
              btc_jobname              = wl_jobname
              btc_jobcount             = wl_jobcount
         TABLES
              pdf                      = tl_pdf
         EXCEPTIONS
              err_no_otf_spooljob      = 1
              err_no_spooljob          = 2
              err_no_permission        = 3
              err_conv_not_possible    = 4
              err_bad_dstdevice        = 5
              user_cancelled           = 6
              err_spoolerror           = 7
              err_temseerror           = 8
              err_btcjob_open_failed   = 9
              err_btcjob_submit_failed = 10
              err_btcjob_close_failed = 11.
Does anyone have an idea ?
Thanks and Regards
Volker

That's because the function reverts to background processing when the page size is over 99 pages (see the code). I posted how to handle this a while back but basically you can either use RSPO_RETURN_SPOOLJOB directly or you can continue to use your current function but you have to poll for the completion of the job (BP_JOB_STATUS_GET) and then get the resulting spool in RAW format with RSPO_RETURN_SPOOLJOB then convert it:
FIELD-SYMBOLS: <fs_line> TYPE x.
DATA: gv_pdf TYPE xstring.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
    rqident              = p_spono
    desired_type         = 'RAW'
TABLES
    buffer               = gt_buffer
EXCEPTIONS
    no_such_job          = 1
    job_contains_no_data = 2
    selection_empty      = 3
    no_permission        = 4
    can_not_access       = 5
    read_error           = 6
    type_no_match        = 7
    OTHERS               = 8.
LOOP AT gt_buffer INTO gs_buffer.
ASSIGN gs_buffer TO <fs_line> CASTING TYPE x.
CONCATENATE gv_pdf <fs_line> INTO gv_pdf IN BYTE MODE.
ENDLOOP.

Has any body work with Crystal Report XI and JDeveloper 10.1.3 ?

Hi All,
We want to use Crystal Report XI as our reporting tools and integrate it with our jsp/jspx application developed with JDeveloper 10.1.3.
Has any body succesfully done this kind of integration ?
Could you please share it with me ?
Thank you for your info,
xtanto

Hi friends,
I use Crystal Reoprt XI (release 1) with JDev 10.1.3, never try Crystal 10 with JDev.
Here is what I do :
1. Install CR XI on the same machine with JDev 10.1.3.
2. Modify CRConfig.XML on folder : C:\Program Files\Common Files\Business Objects\3.0\java on three places :
<JavaDir>D:\JDev1013\jdk\bin</JavaDir>
<Classpath>D:\JDev1013\jdbc\lib\ocrs12.jar;D:\JDev1013\jdbc\lib\ojdbc14.jar;D:\JDev1013\jdbc\lib\ojdbc14dms.jar;D:\JDev1013\jdbc\lib\orai18n.jar; .... [original classpath]
<JDBCURL>jdbc:oracle:thin:@oracle.sas.co.id:1521:ORCL</JDBCURL>
<JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
<JDBCUserName>myuserid</JDBCUserName>     <JNDIURL></JNDIURL>
3. Create the report using Crystal XI, USE JDBC CONNECTION, and it takes about 12-20 minutes to connect, don'y know why :)
( now the integration part )
4. Create a project for the report in our apps workspace (e.d : ViewController)
5. Copy these jar files below to D:\..\ViewController\public_html\WEB-INF\lib
(I got the files from Crystal Installation)
04/03/2006 09:27 AM 666,774 CrystalCharting.jar
03/26/2006 12:23 AM 2,163 CrystalCommon.jar
04/03/2006 09:27 AM 94,137 CrystalContentModels.jar
04/03/2006 09:30 AM 519,003 CrystalExporters.jar
04/03/2006 09:27 AM 60,468 CrystalExportingBase.jar
04/03/2006 09:26 AM 561,021 CrystalFormulas.jar
04/03/2006 09:26 AM 390,049 CrystalQueryEngine.jar
04/03/2006 09:28 AM 1,934,849 CrystalReportEngine.jar
04/03/2006 09:25 AM 413,455 CrystalReportingCommon.jar
09/08/2003 02:42 PM 3,915,966 icu4j.jar
04/03/2006 09:29 AM 135,232 jrcerom.jar
02/10/2006 10:39 AM 698,542 jsf-impl.jar
03/26/2006 12:23 AM 8,680 keycodeDecoder.jar
05/11/2004 07:22 PM 352,668 log4j.jar
03/26/2006 08:33 AM 474,429 MetafileRenderer.jar
04/03/2006 08:47 AM 369,503 rasapp.jar
04/03/2006 08:46 AM 784,065 rascore.jar
03/16/2006 09:35 AM 699,443 ReportViewer.jar
04/03/2006 09:25 AM 95,381 rpoifs.jar
04/03/2006 08:46 AM 21,128 serialization.jar
06/17/2006 01:41 PM 393,259 standard.jar
10/02/2003 06:29 PM 3,777 URIUtil.jar
02/28/2006 10:01 AM 48,279 webreporting-jsf.jar
03/07/2006 08:50 AM 778,348 webreporting.jar
02/20/2004 02:01 PM 1,010,806 xercesImpl.jar
02/20/2004 02:01 PM 124,724 xml-apis.jar
6. Right click the project, project properties, Libraries, Add Jar / Directories,
Add all the jar files from previous step.
7. Copy CRConfig.XML to folder D:\..\ViewController (project folder)
( this CRConfig.XML is the one that I have not modified, the original one. )
Please check, you must have this on the file :
<reportlocation>.</reportlocation>
8. Then create a Folder e.g : reports under WEB-INF :
D:\..\ViewController\public_html\WEB-INF\reports, then copy all reports created on step 3 on to this folder.
9. create a jsp to call the report, here is sample of my JSP :
<%@ page
contentType="text/html;charset=windows-1252"
isELIgnored="true" %>
<%@page import="com.crystaldecisions.reports.sdk.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.exportoptions.*"%>
<%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.reportsource.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@page import = "java.util.*" %>
<%@page import = "view.util.JSFUtils" %>
<%@page import = "oracle.jbo.domain.Number" %>
<%
//Use the relative path to the report; the physical or full qualified URL cannot be used.
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/OrderID2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/test2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/invoice.rpt";
String reportName = "../reports/invoice.rpt";
String userName = "myuserid";
String password = "mypassword";
String compId = (String)JSFUtils.getFromSession("compId");
String docId = (String)JSFUtils.getFromSession("docId");
Number noDokumen = (Number)JSFUtils.getFromSession("noDokumen");
String status = (String)JSFUtils.getFromSession("status");
System.out.println("from rptInvoice.jsp " compIddocId + " " + noDokumen.toString()+status);
try
//Open report.
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(reportName, 0);
     session.setAttribute("reportSource", reportClientDoc.getReportSource());
// Conn info
ConnectionInfos oConnectionInfos = new ConnectionInfos();
ConnectionInfo oConnectionInfo = new ConnectionInfo();
oConnectionInfo.setUserName(userName); //Set username and password for the report's database
oConnectionInfo.setPassword(password);
oConnectionInfos.add(oConnectionInfo); //Add object to collection
//Create a Fields collection object to store the parameter fields in.
Fields oFields = new Fields();
// THE PARAMETERs.
//Integer numberValue = new Integer(2166);
//String stringValue = "IV";
//Set all of the parameter values using the utility function.
setDiscreteParameterValue(oFields, "Nomor_Invoice", "", new Integer(noDokumen.intValue()));
setDiscreteParameterValue(oFields, "Kode_Invoice", "", docId);
setDiscreteParameterValue(oFields, "Compid", "", compId);
setDiscreteParameterValue(oFields, "Status", "", status);
//System.out.println("from view-controller report jsp v2.2");
//Set the export options to export to the format of choice.
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.PDF);
ReportExportControl oReportExportControl = new ReportExportControl();
oReportExportControl.setExportOptions(oExportOptions);
oReportExportControl.setExportAsAttachment(false);
Object reportSource = session.getAttribute("reportSource");
oReportExportControl.setReportSource(reportSource);
oReportExportControl.setDatabaseLogonInfos(oConnectionInfos);
     oReportExportControl.setParameterFields(oFields);
//Export the report
oReportExportControl.processHttpRequest(
request, response, getServletConfig().getServletContext(), null);
catch(ReportSDKException e)
out.print(e);
%>
<%!
* Utility function to set values for the discrete parameters in the report. The report parameter value is set
* and added to the Fields collection, which can then be passed to the viewer so that the user is not prompted
* for parameter values.
private void setDiscreteParameterValue(Fields oFields, String paramName, String reportName, Object value) {
//Create a ParameterField object for each field that you wish to set.
ParameterField oParameterField = new ParameterField();
//You must set the report name.
//Set the report name to an empty string if your report does not contain a
//subreport; otherwise, the report name will be the name of the subreport
oParameterField.setReportName(reportName);
//Create a Values object and a ParameterFieldDiscreteValue object for each
//object for each parameter field you wish to set.
//If a ranged value is being set, a ParameterFieldRangeValue object should
//be used instead of the discrete value object.
Values oValues = new Values();
ParameterFieldDiscreteValue oParameterFieldDiscreteValue = new ParameterFieldDiscreteValue();
//Set the name of the parameter. This must match the name of the parameter as defined in the
//report.
oParameterField.setName(paramName);
oParameterFieldDiscreteValue.setValue(value);
//Add the parameter field values to the Values collection object.
oValues.add(oParameterFieldDiscreteValue);
//Set the current Values collection for each parameter field.
oParameterField.setCurrentValues(oValues);
//Add parameter field to the Fields collection. This object is then passed to the
//viewer as the collection of parameter fields values set.
oFields.add(oParameterField);
%>
10. have a try and HTH :)
xtanto.

How to create one master with more than one detail

Hi
I am using jdev 11.1.2.1.0
I want to add more than one detail view object under one master view object in application module
Please solve this asap
Thanks

Hi Frank
I have 5 view objects (Suppose A,B,C,D,E) and I have created view links between them like
A->B
A->C
A->D
A->E
Then I am shuttling views in Application module (In Data model Tab) to create A as master and rest as details.
But it is not creating as i want.
I add new instance of view object independently.
Please solve this
Thanks
Edited by: 7668489779 on ३० अप्रैल, २०१२ ४:०७ अपराह्न

Can i fill one provider with more than one application?

Hi,
I have so many application. Currently, we adding one provider with one portlet. So, we just want to know is it possible to add one portlet fill with many application?
The idea is we want to reduce provider in portal.
Thank you.

No, you can only sync with one. If you sync with another it will erase the device in order to mirror the other iTunes library.

Has any one work with more than 9 clips to make a multiclip

Similar Messages

Maybe you are looking for