Has any SAP project integrated an EFTPOS device with ABAP Gui using an ActiveX controller?

Dear Friends, I would like to know, Has any SAP Project integrated an EFTPOS Devise with ABAP Gui using ActiveX Controller? If used could you please share the Technicalities involved in them as we have a suggestion to have the same used in our Project.

Similar Messages

Integrating Oracle eBusiness Suite with banking services using Oracle SOA

Hi ,
I am working on a project for integrating Oracle eBusiness Suite with banking services using Oracle SOA. We have implemented Oracle SOA and trying to call bank's services using SOA.
The bank has provided its web services over http which accepts XML data as string through HTTPS post invocation and provides response accordingly in string XML Data.
For each service, specific format of request and response message has been provided.
I am trying to call their web services using HTTP binding adapter.
I would like to know whether my approach of calling bank's web service using HTTP binding adapter is correct or not.
Looking ahead for your valuable insight and advice.
Thanks

Hi,
Thank you for your reply.
Is the usage of B2B not applicable for this project ?
Thanks

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

Has any one got Titan Quest to work with Bootcamp?

I'm trying to get Titan Quest to work with Bootcamp on my MacBook and even though the min. requirements ask for 64MB it doesn't work. Something about “can't initialize graphics engine.“
If anybody has got it to work, I'd appreciate the info.

could be the intel GMA 950 is not suppoerted by titan quest.
Try visit titan quest official sites, maybe they offer patch or updater for make it working for newer or unsupported chip set.
Good Luck.

Want to globally manage all Wireless devices with wired ones using SNMP

Wired devices are already managed, but wireless devices of particular interest which I desire to manage are:
Autonomous:
AIR-AP1121G-J-K9
AIR-AP1121G-J-K9
AIR-AP1131AG-J-K9
AIR-AP1131AG-P-K9
AIR-AP1131AG-J-K9
AIR-AP1131AG-P-K9
AIR-AP1210
AIR-AP1210
AIR-AP1210
AIR-AP1210
AIR-AP1231G-J-K9
AIR-AP1231G-J-K9
AIR-AP1232AG-J-K9
AIR-AP1232AG-P-K9
AIR-AP1232AG-J-K9
AIR-AP1232AG-P-K9
AIR-AP1242AG-P-K9
AIR-AP1242AG-P-K9
WLC
4400 Series Wireless LAN Controller
2100 Series Wireless LAN Controller
3750 Series Integrated Wireless LAN Controller
Is there any single document which compares which traps/alerts are available in which devices/IOS versions or must I pull teeth to compare them?
A simple reference chart/URL would be quite helpful.

The AIR-AP1121G-J-K9 gives off certain traps. What are they?
Likewise, all of the following devices also give off traps.
AIR-AP1121G-J-K9
AIR-AP1131AG-J-K9
AIR-AP1131AG-P-K9
AIR-AP1131AG-J-K9
AIR-AP1131AG-P-K9
AIR-AP1210
AIR-AP1210
AIR-AP1210
AIR-AP1210
AIR-AP1231G-J-K9
AIR-AP1231G-J-K9
AIR-AP1232AG-J-K9
AIR-AP1232AG-P-K9
AIR-AP1232AG-J-K9
AIR-AP1232AG-P-K9
AIR-AP1242AG-P-K9
AIR-AP1242AG-P-K9
WLC
4400 Series Wireless LAN Controller
2100 Series Wireless LAN Controller
3750 Series Integrated Wireless LAN Controller
I'm sure that not all devices list above give off the exact same traps nor do all the devices support the same IOS versions.
That said, looking at which devices support which IOS versions and then looking into each IOS version "ASSUMING" that every device supporting that IOS supports all of those traps is an assumption which network managers cannot take.
So back to my original question.
Where can I find a list of Alerts supported by each of the above listed products?
Walt

Offline Integration of Adobe Forms with CRM System using Web Service

Hi Experts,
I have a business requirement in which the end user us given an Application Form.
The user can save the form locally and fill the data.
Now the requirement is that when the end user clicks on Submit Button on the form, a web service is called and the entire data in the form is sent to CRM System.
I want to know is it possible to capture the entire data filled in the form in a web service???
Also the other major requirement is that i need to send the application form also to the CRM system.
I need to store the form as attachement for a Business Partner Record.
Is it possible to capture the data in the adobe form and still attach the form as attachement in an Offline Scenario????
Is it possible that a Web Service can be called on click of button in the form and still be able to attach the form itself as attachment???
Thanks and Regards
Gaurav Kumar Raghav

I have collected some links for WebServices for you:
https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/38-51084/saptech_webservice.pdf
Re: Adobe forms with Web Service - nothing happens when clicking button.
/people/rudy.clement2/blog/2010/03/10/how-to-use-the-postexecute-event-in-sap-interactive-forms-to-retrieve-a-table-from-a-webservice
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/148ec26e-0c01-0010-e488-decaafae3b26
Usage of webservice in offline adobe scenarios
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0d0a250-ccd1-2c10-9e9f-b9d5cf259a6d?quicklink=index&overridelayout=true
cheers Otto

Associate a device with a DN using AXL API

Hi guys,
I am trying to add a DN to an existing phone device using AXL API via Java. I keep getting this error:
Devices can only be associated with DNs, Route Patterns and Hunt Pilots.
I have two existing lines on this device which I added through call manager, but now I am trying to add a third one using AXL API. This is what I did to get this error and I am not sure why:
XDirn dn = new XDirn();
dn.setPattern("6340");
XPhoneLine phoneLine = new XPhoneLine();
phoneLine.setDirn(dn);
phoneLine.setAsciiLabel("TESTING - 6340");
phoneLine.setDisplay("TESTING - 6340");
phoneLine.setDisplayAscii("TESTING - 6340");
phoneLine.setLabel("TESTING - 6340");
phoneLine.setBusyTrigger("2");
phoneLine.setIndex("3");
phoneLine.setMaxNumCalls("4");
UpdatePhoneReq updatePhone = new UpdatePhoneReq();
updatePhone.setName("SEPD824BDBBCAF1");
UpdatePhoneReq.Lines newLine = new UpdatePhoneReq.Lines();
newLine.getLine().add(phoneLine);
updatePhone.setLines(newLine);
port.updatePhone(updatePhone);
the error occurs at the last line when I try to push the update.
Thanks

I just tried to execute SQL commands through the API and that is not working well either. The Axlsoaptoolkit.java file works fine but not through the API. this what I have done:
ExecuteSQLQueryReq sqlReq = new ExecuteSQLQueryReq();
sqlReq.setSql("select * from device");
ExecuteSQLQueryRes sqlRes = port.executeSQLQuery(sqlReq);
System.out.println(sqlRes.getReturn().getRow().get(0));
System.out.println(sqlRes.getReturn().getRow().get(1));
System.out.println(sqlRes.getReturn().getRow().get(2));
This returns null on the first 3 rows where I have more than a 1500 entries in that table. I verified using the Axlsoaptoolkit.java app

Integrating Mobile device with SAP XI

Hai,
       In integrating mobile device with XI.
      What are the settings i need to do in ALE settings.
      what type of adapter i need to use.
please provide complete information related to SAP R/3 settings like
1. logical system
2. rfc destion nation
3. ports
4. parter profile
in XI side what are the settings i need to do.
plase provide complete information. help me out.

Please,
check the following documentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d
It is an article about the integration of mobile devices with XI from this site.
I hope it helps you.
regards,
Jaime

SODA - Service Oriented Integration of Medical Devices in Hospitals

In this thread I will write about my dissertation project. It addresses the problem of the integration of medical devices with their proprietary interfaces and data models into the existing hospitals´ IT infrastructure.
Interoperability is an almost non-existent feature of medical devices. The consequences of non-interoperable devices in hospitals are manifold. Medical data produced by devices cannot be directly integrated into hospital information systems for medical documentation. Thus, important data will be lost and examinations have to be repeated if required information is not available due to incomplete documentation. In addition, the documentation quality is affected by human errors due to manual nonelectronic steps and media discontinuities. Another example is maintenance. Medical devices have to be maintained at regular intervals. Thus, an inventory of all devices, their status and maintenance intervals is needed for generating a maintenance manual. Currently there is usually no possibility for automatically getting a detailed inventory of all medical devices in a hospital (or section of a hospital).
The market size in conjunction with a multitude of companies and products (the DIMDI information system contains data about 60,000 medical devices) results in challenges concerning interoperability due to different proprietary hard- and software interfaces, data structures and semantical interpretations. Initiatives like IHE (Integrating the Healthcare Enterprise) are trying to push standardization in the medical sector. However u2013 as mentioned above - the current situation is still unsatisfying and increasingly getting worse due to the continuously growing number of medical devices and associated interfaces.
A promising approach for overcoming interoperability issues is the service oriented device integration, also known as SODA (Service Oriented Device Architecture). The basic concept is the encapsulation of devices as services, analogous to enterprise services in service oriented architectures (SOA). An enterprise service is a software component that offers a business functionality on a highly semantical level by specifying the interface in a standardized way (e.g. by the Webservice Description Language u2013 WSDL). Highly semantical level especially means, that a service is self-descriptive in a way that it can be consumed dynamically and loosely coupled by other components with a consistent understanding of shared data. In the medical domain a device service for instance could offer functionality for measuring the current blood pressure of a patient. Based on such basic services more complex services (like a patient monitoring system) can be realized.
The main advantage of the service oriented approach is that the manufacturer-specific device interface does not have to be known by the service consumer and by the programmer respectively, as it is encapsulated by a standardized service interface. This enables the extension of IT supported medical processes by devices, e.g. by using the Business Process Execution Language (BPEL). In addition new functionalities could be added to the device service that are logically related to the device but not offered by the device itself (e.g. tracking & tracing functionalities); so the device service can be considered as a virtual device. Therefore software maintenance will become easier, because the service interface remains unchanged in case of a device exchange or device interface changes. In my dissertation project I will explore the advantages and obstacles of the SODA concept in comparison to existing approaches for integrating medical devices in hospitals.
The SODA approach is in accordance with the SAP Enterprise SOA (ESOA) strategy. For instance, the scope of the Healthcare Community Definition Group is to further enhance the Enterprise Services (ES) Bundles Patient Administration and Medical Activities, Patient Billing and Invoicing and to define a new ES Bundle on Medical Documentation. SODA projects define services for devices. These services can use or combined with Enterprise Services, e.g., for Patient Administration. In the EU funded project SOCRADES, SAP Research explores the SODA approach in other domains, especially industrial automation.

Hmm, perhaps your other discovery settings are configured that it'll get the OOB OU because you're OOB OU is under some other OU that's configured to be discovered and you have the recursive and group settings turned on, CHECK this first.
Remove the OOB from your discovery. For testing purposes, remove (delete) one or more machine objects from the ConfigMgr console, wait a while and then run the AD System Discovery again and check what object gets there. AD system discovery shouldn't look
objects from other OUs than the ones you've specified in the discovery settings.
I'm not that familiar with vPro, so the behavior you're seeing might well be the default, but I doubt that.. Doen't make sense that you control your computer objects.
For more information you could also post adsysdis.log from the configmgr server.

Any news of integration with Mozilla Lightning, Sunbird?

Is there any news of integration of Oracle Calendar with Mozilla Lightning, Sunbird?
Luke

Is there any news of integration of Oracle Calendar with Mozilla Lightning, Sunbird?
Luke

Device type to be used for Zebra 220XiIII Printer

Hello All,
We are printing labels from SAP to the printer Zebra 220XiIII Printer using Adobe Print forms technology. When configuring the printer, we used the device type as PDF1. The print was fine in terms of data display and positioning of the text and barcodes but the issue is that it takes 30secs. to print each label. This was not acceptable as it is creating delays in Shipment.
To address the issue we changed the device type to LZEB3. The print was fast i.e., in 20 seconds the printer was able to print 5 labels but the font on the label is increased automatically because of which the data on the label is truncated.
Does any one have any ideas on what is the device type to be used and is there any specific font to be used?
Please note that we desinged the forms using ADOBE FORMS TECHNOLOGY. There are many notes in Service market place which are specific to Smart forms. Please come up with your ideas.
Regards,
Praveen T

Hi Florian,
Thank you for your response. We were able to fix the issue by changing the Device type to LZEB2.
For some reason YZB200, YZB300 and other device types which we found in the device type wizard did not work in our case. We did not investigate the reason as LZEB2 worked and we have time crunch
Regards,
Praveen T

Unable to synchronize the Address Book on the BB Device with Outlook Software 2010 Contacts

Enviroment :
Device Black Berry Bold 9700
Back Berry Device Software V6
Cause of problem :
On the BB Device there are 2 Adress Books with the same name.
The first one with 109 elements and the flag for wireless synchronization
The second, which is of most importance to me since it includes my business address book, contains 1837 elements and does NOT have the flag for wireless synchronization.
Whenever I try to synchronize the BB Device with the PC , using Black Berry Device Software on my Windows 7 based PC and Outlook 2010 Application Software, only the first Adress Book appears active.
I tried to solve the problem through the BB Support Forum (see link below)
http://btsc.webapps.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB1...
and regretfully I found out that no solution are available so far.
This is a previously reported issue that has been escalated internally to our development team. No resolution time frame is currently available.
The suggested Work Around doesn't work.
Since both address books could be cleaned but not erased, it is impossible to delete the first address book and subsequently synchronize the right data .
I tried to synchronize the BB Device with the Windows contacts but the result is the same: the synchronization works only for the first (small) Address Book.
Another bit of info, to worsen the situation: last week the HDD (internal disk) on my PC crashed, therefore I lost all my data; as a result, the only correct Address Book data available is inside the Black Berry device (larger list, which is the second, as stated above) , thus I absolutely need to recover all the 1837 addresses included, since they are vital for my business work.
I need your help to solve this situation caused by an evident Black Berry Software bug.
Thanks in advance

I do not receive any suggestions to solve my problem.
After 6 month the problem is very urgent, my business address book is vital for my work.
I have only the copy on the Device Black Berry Bold 9700 and I absolutely need to have a copy of the address book on my computer.
Do you have solved the bug.
I need a quick answer and a final right solution
Thanks
Luigi Policoro

Assigning ports to multiple devices with HH5

Im am trying to assign ports to each of my gaming devices (PS4, Xbox One and PC), these devices share some ports such as 3074, 80, 53, etc. I have set up the PS4, but when I tried to set up the Xbox One it wouldn't let me as the PS4 has duplicate ports.
Is there any way to set up multiple devices with the same ports?

You can only forward the same port(s) to one device.
If you forget about using port forwarding, and simply allow uPnP to allocate the ports, then you should be able to use one device at a time.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to find out whether a material code in SAP has any transaction history

Hi Guys,
I want to find out whether a material code in SAP has any transaction history or not. In other words, I want a list of all those materials, division-wise, which have not been subjected to any sort of transaction in SAP till date , i.e., lying unused.
Can any of you in help me out regarding this matter ?
Regards,
Anirban

hhi
go to se16
table MBEW and field LBKUM for total stock
from here u can conclude for the zero stock material
or try this
S_ALR_87012963 - Material Where-Used List
regards
kunal

SAP SD Any dummy project for practice ??

Hello
Is there any dummy project type of thing possible for SAP SD practice???

Hi
u can download from this link the building blocks
<a href="http://Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India --> List of Basic Configuration & scenarios will">http://Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India --> List of Basic Configuration & scenarios will</a>

Has any SAP project integrated an EFTPOS device with ABAP Gui using an ActiveX controller?

Similar Messages

Maybe you are looking for