Has anybody asked for rma Micro returned with 2.11.

I had to rma my Micro and emailed Creative and asked if they would return my player with firmware 2..02 installed. They emailed back and said that they would write a note on the rma slip to install 2..02 but would not guarantee that it will get done. Has anybody asked for this and gotten 2..02 installed into an rma Micro?

I guess you need to request for 'server file' from verisign ,
put it in your server directory and point
SSLCertificateChainFile to the file.

Similar Messages

  • My iPad has stopped asking for my apple I'd password when downloading apps.  I want it to ask for password because my kids keep downloading apps without asking.  How do I rectify this?

    My apple I'd has stopped asking for my password when downloading apps to my iPad.  I want it to ask every time.  I edited it unknowingly and I need to change it back.  Please help! Thx

    Assuming that you've got the relevant iOS version on the iPad, then you can change it from a 15 minute period during which it doesn't need to be re-entered to immediately via Settings > General > Restrictions > Require Password

  • Photoshop CS4 has quit asking for quality level when 'Saving As'?

    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM

    ImageMan II wrote:
    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM
    It depends on the original format and the destination format of the file.
    PS: You should upgrade to version 11.0.1

  • SDK Trunk. Update my local copy has started asking for username/password

    SDK Trunk. Update my local copy has started asking for username/password
    these has been happening on and off for a few days now.
    when i click update on my local copy of the sdk ready to do my morning build I've started to be asked for a username and password. I do have a username and password for sandbox and patching etc but entering this has no effect.
    are there times of day when the trunk is locked or something like that? This is not happening all the time but it is several times a day.
    has anyone any idea why this is happening
    Ive don e all the usual things, clean my local version, grabbed a totally new version etc
    im on windows using TortoiseSVN(which is always using a current build)
    cheers
    g

    Ive had this same issue on and off across all the open source svn
    im yet to find any pattern apart from the fact that the auth error only ever shows the root of the svn request.
    Ie http://opensource.adobe.com/svn/opensource/
    Now im not sure if thats just the way the reporting ui works of if it indicates that somewhere in the update it starts to trigger the url rot and thats where the auth request gets triggered. This may be total nonsense. Just a thought.

  • I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

    I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
    How could this have happened and what can I do to get it running again? 

    Didnt realize there was a response, late getting back to you.
    Save your process files outside of the NI progam directory (you should have external backups already right ).  THey should not be deleted.
    Any customizations to the lookout.ini and lookout.sec file may be lost.  
    Mike
    Forshock - Consult.Develop.Solve.

  • I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16   digit and 4 special characters. No combination of numberic, alphanumeric, special characters works. Help

    I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 +  digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!

    I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 +  digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!

  • HT4009 How long does it take for apple to return with the needed code for in app purchases.  We have a developer working through elance that states he submitted a finalized version last friday to apple and is still waiting to get the code back from Apple?

    We are being told by our elance developer that he is just waiting on apple to return the code for in app purchases with our app.  he says he had to submit a complete version before they would give it to him and that he did that last friday.  Needless to say i don;t beleive him.  Can anyone validate for me the process of getting the code installed into our app and how long it should really take.

    I'd say an average of one week, depending on backlog. Expect two if you are outside the US.
    The outage has caused some lingering effects that seem to be delaying things for some, however.
    Patience is key in all things when it comes to being a developer

  • Safari asking for UAC every time with Windows 7

    Hi,
    I have been using Safari for two years, never had any issue until yesterday, no updates or changes were made to the PC recently. The problem is Safari is asking for UAC every time I open it, Aero also gets disabled at times, I'm having exact issue posted in the following thread:- http://discussions.apple.com/thread.jspa?messageID=12485852&#12485852
    See this:- http://i52.tinypic.com/jjqis2.png
    Safari never used to ask for UAC or disabled Aero before, I've run a full scan with my anti-virus, there is no sign of virus/spyware/malware etc.
    My PC has current drivers from the manufacturer with all Windows Update applied, I'm also using most recent version of Safari. I've uninstalled and reinstalled Safari to no avail. Any help to pointer to solve this (other than disabling UAC) would be appreciated.
    Thanks!!!

    ... it's a strange one ...
    The one thing I can think of that I know can produce the symptoms is if (somehow) the "Run as administrator" checkbox has been checked in the Compatibility tab of the preferences for your Safari.exe. (Sometimes they get ticked without user intervention, for no apparent reason.) So we'd better check on that, just in case.
    Quit Safari first.
    In Computer, open Local Disk C.
    If you've got a 32-bit Windows, open the "Program Files" folder.
    If you've got a 64-bit Windows, open the "Program Files (x86)" folder.
    Open the Safari folder.
    Right-click on your safari.exe and select "Properties"
    Go to the Compatibility tab and make sure *no boxes whatsoever* are checked in the tab. (Just in case.)
    Click OK.
    Does Safari launch without the error now?

  • Has anybody captured an error frame occurence with CAN driver version 2.2

    I was very excited about the appearance of the Comm Error Frame Type in version 2.0 of the driver. I have a Series 2 card and was working with the CAN driver version 2.2 to attempt capture error frames with an in house written tool.
    Currently we have a tool from Vector that we must use to monitor our CAN system for Error Frames that occur due to a discrepancy in the ATMEL CAN core that we are using. We would like to get rid of the Vector tool and though we could because this capability appeared to be available in the NI driver.
    I executed ncConfig with NC_ATTR_LOG_COMM_ERRS = NC_TRUE and the called the ncRead command to get data from the Read Queue. The tools built upon the NI CAN driver and the Vector tool seen exactly the same data, except that when the a communication attempt was turned into an error, the Vector tool indicated and Error Frame had occurred and nothing was available from the NI tool.
    Has anybody captured an NC_FRMTYPE_COMM_ERR Frame with the ncRead command, and if so would you be willing to help.
    Thanks.

    biker2000 and LoganS
    Thanks for all of the support on this issue, I am better understanding how the NI CAN card works.
    However, the described functionality provides little to no value in how I am using the National Instruments CAN card and I have submitted a Product Suggestion through the link provided earlier in this thread. Your example describes exactly why the implemented Error reporting is not useful. Many errors have to occur before the transition to Error Passive, but you only get the last one, which may or may not reflect what the overall problem is in the system.
    Also, this leads me to another problem that I am having. The transition to Error Passive and Bus Off were added in a recent version of the CAN driver. Was there ever any though to making this configurable. It is problematic for me every time I restart the system that the NI card is connected to because the NI card ends up in Bus Off. I know this is following the CAN Protocol (our physical layer has Dominant = Zero = 0 V, when the system is powered down the NI Card would see may consecutive Dominant bits) because of Rule 6, section 8 (Fault Confinement) in the Bosch CAN specification. However, the NI card in my application is being used to monitor and interact with the system, it is not part of the functioning system. When it goes to Bus Off, my test application is dead. I would rather the occurrence of errors get reported, so I can see what the problem is, and fix what is wrong with the system, but still continue to function as best possible. I use the NI card in a lab environment for testing.
    Again, thanks for everything
    Nathan

  • Has Anybody Used the Canon HF R10 with FCE 4?

    Has anybody out there had success with using the Canon HF R10 in FCE 4?
    Thanks in advance for any replies.
    Jim

    I just confirmed it is a bug in Visual Studio 2013.  Using Visual Studio 2010 (VS10) I have no problems creating a database.  The workaround in VS 2013 is to create a database in VS10, store it on localhost, import it into your Solution using
    SQL Server Explorer in Visual Studio 2013, then you can create an Entity Data (ADO.NET / EF) that connects to the database.  But even this step is a bit of a problem, in that you must first create an empty Entity Data, then populate it by connecting to
    an existing database, which would be the database you imported from VS10.  If you try and connect the Entity Data directly to the database using the Entity Data Model Wizard, nothing seems to happen.  So first create an Entity Data model (empty),
    then connect it to the database you have created with a New Connection using the built in Visual Studio 2013 SQL Server manager.

  • HT5622 New Ipad setup has not asked for a password just an Apple ID says ID is already being used reset forgotten passsword. But hasn't asked for a password?

    Setting up new Ipad and it asked for Apple ID but no password. Next screen says ID is being used. Reset password? Why? How do I go on with setup?

    You do not have to enter an Apple ID in order to set up an iPad. You can do that after the device has been activated. Can you back out of the setting and remove the Apple ID then move forward and deal with it after the iPad is activated?

  • Trying to upgrade my ipad mini to ios7 get error 3014 .have tried most of suggestions , ipad  has image asking for connection to itunes. and around and around I go

    Trying to upgrade ipad mini to ios7. extracts software but wont restore it . error message 3014..ipad no longer working, just image asking for connection to itunes.Have tried all the troubleshooting suggestions I am capable of. ((((((

    There is some troubleshooting for error code 3014 on this page : http://support.apple.com/kb/TS3694
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Has anybody know for program that runs Tomoview on Mac

    Dear All,
    Does anybody know for a program, that can runs Tomoview on Mac computers?

    It is not available for the Mac unless you run Windows on the Mac.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Hey,  I don´t know why or what but while I was using my mac, the icloud locked my mac and now asking for a PIN lock with 4 numbers that I never set up before... What a need to do to fix it??

    Hey I just want to use my mac but I can´t sign up it because asking me for a PIN LOCK that I don´t have any idea...
    Case ID: 471327240

    If your Mac was locked with Find My Mac, you'll have to take it to an Apple store or authorized service provider to have it unlocked.  You will need to bring the necessary paperwork to prove that it is yours.  From http://support.apple.com/kb/TS4006:
    "Only Apple retail stores or Apple Authorized Service Providers can unlock computers protected by a firmware password, such as passwords set with Find My Mac.
    If you cannot remember the firmware password for your computer, schedule a service appointment with either an Apple Retail Store or an Apple Authorized Service Provider. If you plan to visit an Apple Retail store, make areservation at the Genius Bar (only available in some countries)."

  • Itunes has downloaded,asking which program to open with to finish dowload

    Hi
    I have downloaded itunes on my computer and at the end to finish the download it asks me what program i want to use to open itunes.
    can anyone help me with this ? when i done this in the past the windows installer just loaded itunes ?

    Well, what type of file is it?
    If it is a DMG, then you accidentally downloaded the Mac version. If it's a ZIP, you need to decompress it (Windows has this ability built in). If it's anything else, we need more info.

Maybe you are looking for