Has anybody else noticed that Find/Change searched according to -

Has anybody else noticed that Find/Change searched according to date added?  It doesn't go page by page — it searches in the ORDER that text was added to a document.
For instance, if you started with Pages 300-400, then added text to page 200, then added text to pages 100-200, THAT IS THE ORDER Find/Change will search.  Crazy, no?
By the way, does anyone know how to FORCE Find/Change to always center a spread?  Currently, it moves the various pages all over the place during a search …

We are using Exchange 2010 and IOS 6.0.1 and seeing this issue with exceptions associated to recurring meetings on both the iPad and iPhone. 
Oddly, you can make the first change (time of meeting, for example) to an exception in the series and have the change sync from Outlook 2010 to the iPad. If you attempt to make a second change to the same exception, the 2nd change does not sync to the IOS device.  Thoughts?

Similar Messages

  • Has anybody else noticed a 10-25% openGL slow down with 10.7.5?

    Hi,  I was running x-plane 9.70 at certain settings on my 17" MBP (early 2011, 10.7.3) and noticed I was getting about 70 fps... nice.  I do an update on firmware and OS (10.7.5) and I notice that the x-plane fps has dropped to about 55. The settings and environment the same as near as I can get.  I thought this was bad but maybe just x-plane or something peculiar.  I also couldn't tell if the performance drop was caused by the firmware update or the OS update. 
    I remembered I'd done an xbench benchmark with 10.7.3 so I did a new one with the updates... sure enough the openGL numbers had dropped by 20% or so.  So, I hooked up my backup drive with 10.7.3 on it and ran x-plane and xbench again to try to isolate the firmware update from the OS update.... The results were x-plane still showed a drop of about 10% and xbench about 25%.  Looks like there is something wrong in 10.7.5.
    Has anybody else noticed a performance slow down in openGL functions with 10.7.5?
    Khan

    Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
    One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
    Thanks again, I'll get back with results once I get the wounded laptop back up and running.

  • Adobe is great software but has anyone else noticed that Corel has a better line drawing tool?

    Adobe is great software but has anyone else noticed that Corel has a better line drawing tool? I end up doing all my line drawing in Corel because it is so simple and then importing it into adobe. You would think, with all these updates that they are constantly doing Adobe would think to simplify it's pen tool. I'm talking about the pen tool in illustrator. Don't even get me started on the bloody rubbish pen tool they've got in photoshop. It makes deep etching something properly a really agonising task.

    I'm not sure that I followed everything, but you got a replacement phone and continue to experience problems? It sounds like a logical move would be to have AT&T replace your SIM card. I would doubt that the size/fit is an issue, these things are a standard size, but replacing the SIM will have an impact on the network set-up that might be the root cause.

  • Has anyone else noticed that the iOS 6 Maps App is missing the area code for many places it has listed?

    If I try to look up a local business on the Maps App it drops a pin on all of the locations matching my search parameters. However, when I get details about a dropped pin, the phone number is usually missing the area code! For example, if the phone number is +1 (123) 555-5555 it would show up as +1 (555) 555-5. This makes it impossible to call directly from the maps app or to copy and paste infront of a manually entered area code (because of the '+1'). Has anyone else noticed this?

    Have you checked to make sure that your region settings are correct?
    Settings>General>International>Region Format

  • Has anyone else noticed that Adobe Camera Raw 7.x exhibits odd behavior compared to version 6.x?

    I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

    I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

  • Has anyone else noticed that iBooks search does not find all information that should be located for a specific search criteria?

    I am converting a novel to ePub format.  I am currently in the process of adding "end notes" to the book.  Each will have a flag embedded at the proper spot in the various chapters that is coded as "[See End Note xx]" where xx is a one or two digit number.  Each of the flags has those words surrounded by the HTML that links the flag to the proper end note at the back of the book.
    To verify that I have indeed inserted correctly each end note, I copy the book's epub file from my desktop PC to the iPad.  I then do a search in iBooks to locate each occurance of "[See End Note" or just "End Note".  I should see each of these flags listed.  Last night it would list all of them except "[See End Note 28]"!   If I did a search for "28", it would appear.
    I then copied just the flag itself ("[See End Note 28]") without the associated linkage HTML to the back of the document, and placed the copy just in front of the paragraph that contains it. Neither of the two flags were found.
    I then duplicated just the flags for end notes 27 and 29 which the search function had located.  I placed the copies surrounding the copied flag for 29.  The result was as follows in the text of the book:
    [See End Note 27]
    [See End Note 28]
    [See End Note 29]
    Although 27 and 29 were still being shown in their normal places, none of the above three inserted (test) flags was displayed by the search!
    It seemed that the iBooks search goes through part of the book, but cannot take the whole book in one piece.  It then continues, but leaves a gap that is not scanned per the search criteria.  To test that theory, I removed the entire text of several chapters that did not contain any end notes.  I then loaded this modified copy of the book into the iPad.  When I ran a search using "End Note", all of the flags (including the special test flags) were displayed.  The list included the "missing" "[See End Note 28]" that cannot be found if the all of the chapters have their text!
    I shall be calling Apple in a few minutes to again attempt to get the apparent "bug" (aka design or coding flaw) removed such that it does not
    impact the ability of the iPad to be a useful tool.

    Not all movie studio signed up to the agreement with Apple to allow redownloading of movies, only those that did will have their movies available in the purchased section of iTunes.

  • Has anyone else noticed that the flag accelerators are broken in LR5?

    I'm running LR5 on Windows 64 bit and have noticed that the flag accelerator keys, P, U and X don't work. When I press these in the Library module, the text pop-up tells me that the appropriate flag state is being set but the flag never actually changes state. To change the flag, I have to right click and use the "Set Flag..." context menu. This makes editing a lot slower since I can no longer move through all the shots and pick selects and rejects using the keyboard. Can anyone suggest a workaround?

    Rikk,
       Thanks for the pointer. In the end, it seems that this was some local weirdness. It's been failing for a couple of days but, after posting the question, I closed LR and restarted and, hey presto, the accelerators and working correctly again. Probably just another case of Windows bit rot but I'll keep my eyes open for a repeat since I've never seen Lightroom behave that way before.

  • Has anyone else noticed that Auto-Brightness does work on iOS 6?

    I recently  noticed that Auto-brightness does not work under iOS 6 for my iPhone.  Anyone else experiencing the same problem?

    If it were the iOS, there would be a tremendous number of folks with this issue.
    It is not the iOS.
    If resetting doesn't solve it, try restoring.

  • Has anyone else noticed that newly purchased shows have no episode description on iPad?

    Has anyone noticed that episodes descriptions from episodes purchased in the last week has disappeared and is no longer on the iPad?

    It's not just you, and it's not just on the iPad. https://discussions.apple.com/message/20046532#20046532

  • Has anyone else noticed that the Verizon reps in here are just not very helpful?

    Maybe its me, but I notice that the worse responses to someone in need come from those with Verizon customer service.  Its like they are not really paying attention to the question, responses, or problem and just type a pat scripted response with this annoying fake empathy. 
    I'll start. 
    Advice #1:
    I think every Verizon Rep in this community forum should get a cell phone. An Android smartphone...on the Verizon network....one that just recently got the Kit Kat update.  I WANT THEM TO FEEL OUR PAIN!!!!
    (From many of the VZW CS responses, its like there are clueless to what is going on. Like they don't have any experience with the cell phones problems we describe.)
    Message edited as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

    >>Post removed for discussion of moderation; please review the Verizon Wireless Terms of Service<<
    Edited by:  Verizon Moderator

  • Has anyone else noticed that colors are washed out on screen on the white iPhone?

    Comparing the white and black iPhone 4 side by side, I noticed that colors on the screen are washed out on the white iPhone. This is clearly noticable when clicking on messages and looking at the top where the word messages appears in blue/gray color. When looking at this on the white iPhone, its more white than blue/gray.

    It could be just the contrast in color with your eyes looking at the white iphone vs the black one. Your eyes can sometimes play tricks on you. But in all seriousness, iPhone screens vary in color temperatures. I have seen two black iphones 4s that looked like they had different displays in them.

  • Has anyone else noticed that Iphone 3G tray is larger than AT&T's sim card?

    Hello,
    Just a brief history of my iphone to start. Purchased in December of 09 via Best Buy. About 3 months ago I started to have connectivity issues with the Iphone. I would not receive notices of people calling and my text messages would come 12-48 hrs later than when they were sent. I called AT&T first regarding the issue. They pointed the finger at Apple and said it was their issue, I felt that it was their issue. I blamed their 3G network for the issue, as well as stating that they do not keep their end of the bargain regarding the best 3G network. I threatened a class action lawsuit against them regarding the false claims of their cellular network in Wisconsin being available to my area. That aroused someone because before I knew it I was being told that I would get a new phone. I received the new phone within 5 days. The phone I received is no better than my previous iphone. Same issues as stated above, as well as searching for service, showing one bar with the edge symbol, and having the phone remove the edge symbol when making a call. It's ridiculous to say the least. So one of my questions is, can Apples hardware or software be the issue or is it a case of AT&T network being non compatible with Apples hardware or vice versa? Let me also state that its not just me with these problems where I live(Area code 53559) but others as well with the Iphone 3G. Here is the funny part, one of my friends has the 3Gs and his phone does great where I live, 4-5 bars constantly to my one or none. This brings me to believe that the 3Gs hardware is different some how? Antennae?etc. Is this true? I'm at my ropes end trying to get my phone to work like it should. I'm also exhausted dealing with the blame game between Apple and AT&T. If anyone has any answers or advice I would appreciate it very much. Regarding the Subject of this post, does anyone else's card come up short of fitting(Could this contribute to the connectivity issues?) the tray perfectly front to rear?
    Message was edited by: yokomo

    I'm not sure that I followed everything, but you got a replacement phone and continue to experience problems? It sounds like a logical move would be to have AT&T replace your SIM card. I would doubt that the size/fit is an issue, these things are a standard size, but replacing the SIM will have an impact on the network set-up that might be the root cause.

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

  • Has anyone else noticed that Software Update is not requiring a password to install updates?

    I noticed this started after the 10.6.6 update on all my Macs.  Anyone else experiencing this?

    Thomas A Reed wrote:
    The whole point of the password is to prevent software from installing without the user or admin definitively accepting that it is ok to do so.
    Actually, it is to give access to areas that you don't normally have access to, and in the case of updates coming straight from Apple and installed from an admin account, it has been deemed safe not to request a password.  I believe those updates are verified by the system somehow, so they cannot be malicious unless someone hacks Apple, and then you'd still think nothing of giving your password anyway.  There's no reason to ask for a password in this case.
    I understand this.  It protects the "protected" parts of the system.  But I still think that you should have the last say even if Apple is as trusted as they are.  At the end of the day it is still your computer.  I deal with hardware that requires firmware and software on a regular basis, and just because the company says it is ok to do an update, does not always make it appropriate to do so.  A lot of times it causes more harm then good.  There have been several cases (like iPhoto) recently where you may want to hold off on an update, and allowing all the packages to install in a bundle without a password opens you up for potential issues.
    Thomas A Reed wrote:
    anyone can come along in your house and run updates without your knowledge
    If you've got untrusted people using your admin account, you have bigger problems than someone installing an Apple software update without your knowledge.  If you are security-minded, you don't do that, and thus this issue becomes moot, and if you're not security-minded, then the issue is moot because you don't care enough to secure your computer.
    Perhaps that read different from how it was intended to sound.  My intention for that statement was not to suggest that I do not fully trust my family, but rather that they may not know what they are doing.  Surely you have someone in your family that comes to you for computer advice?  The password was an added security feature that gave me piece of mind from one of those "I don't know what just happened all I did was..." moments.  If I wasn't security minded, do you think I would waste my time expressing an opinion about a security issue?
    Thomas A Reed wrote:
    this opens a door for OSX to automatically add these updates in the future without your consent as long as Apple deems them appropriate
    Don't you think that's a little paranoid?  Why would Apple do that?  Microsoft tries to copy Apple, not the other way around.
    Actually no I don't think it is paranoid.  I do agree that Microsoft copies Apple in every which way they can, and I am a 100% non-Windows household.  I simply see this as a potential pitfall that Apple has opened up.  Even though I do love, admire, and trust Apple, at the end of the day they are a business, and in such a decision could be made to "protect" its user base by allowing OSX to automatically add any updates they deem necessary whenever they want in order to "protect" the perception of their product.  As I stated above, not all updates are wanted right away.

  • Has anyone else noticed that you can't download a single song via ITunes Match on the iPod app?

    The ability to download a single song has been removed. Now it only downloads if you're playing it. So if I want to download a few different songs to play I have to go back into the app at the end of each song and select a new one to play. I can't create a playlist by downloading all the songs I want to listen to. Basically it has become a one song at a time service. Aka worthless. This needs to be fixed. If I can't get the songs I want onto the phone then why would I do anything but sync with my library since I can do that all at once. This may be the most unexplainable change I've seen on any apple update.

    I have an audiobook that is over 100 tracks long and a few GBs in size.  I simply cannot believe that there is no way that I can download a single track from that without having to make a playlist for the whole thing.  I simply cannot stream it because my cell provider's 3G speeds just aren't fast enough to allow any tracks to be played without skips and my docks won't recognize a streaming track being played as legit so I can't listen through my car unless the track is downloaded.  Plus I don't want to eat up many GBs on my phone when I only need a couple of tracks per day.
    I don't know why Apple decided to take away the individual track download feature that iOS5 had.  It was perfect for me.  This new system in iOS 6+ just doesn't work and makes me want to quit using iTunes Match altogether (since I can't just manually drag the tracks I want to listen to to my phone before I leave the house).  Maybe it was because Apple didn't like seeing all of the little iCloud buttons next to each track?  Perhaps just give us a setting to turn it back on if we want to.  Apple has ruined iTunes Match for me.  I really hope they bring this feature back in the next iOS update.

Maybe you are looking for