Has anybody experienced camera drivers wont work after calling Camera.getCamera() so many times?

Using Flash Player on Windows machines, since version Flash Player 11.4 - Flash Player 15 (ActiveX version), and every version after that we have experienced an issue in which Hauppauge PCIe cameras and Videology cameras or other non-standard cameras fail to work with Flash Player after calling getCamera() so many times. For example, we get the camera, and publish a netstream for 10 minutes, then we set the camera to null. Later we call the camera again and after doing this 25 times, or 100 times, the camera driver just seems to fail, and Flash Player acts like it is streaming the camera, but the NetStream info indicates that zero bytes of video data was streamed indicating that there were no pixels that came from the camera.
Has anybody else experienced this issue to where you have to restart the browser or the Windows process in order for Flash Player to be able to getCamera() properly again?

Yes, it appears that others have experienced a similar issue. Adobe has not yet confirmed that this is a bug, but it is being tracked here:
Bug#3850401 - Handle leak with video.attachCamera leading to inoperable camera

Similar Messages

  • Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

    Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

    This previous discussion discusses the same if not similar problem.
    https://discussions.apple.com/message/6750990#6750990

  • Has anyone got Push mail to work after migration t...

    Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
    I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
    But people have told me that once migrated to the new BT Mail server, Push mail isn't available
    BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
    So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

    There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

  • Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    @Satterp
    Not sure if you were responding to me or OP - my iPhone is on 5.1.  The OP at the time of writing was on 5.0.1.
    Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

  • Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

    I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
    like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
    You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
    As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
    That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Headphones controls wont work after upgrading to ios5?

    Headphones controls wont work after upgrading to ios5, has anyone solved this problem?

    ajkula66 wrote:
    Secondly, what is the 7-character model number of your T40 so we can point you to correct wireless drivers..237?-???
    Goo00oogle, you forgot the other 3 digits
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Has anybody gotten a RocketRAID 640 working in a Mac Pro?

    I have a RocketRAID 640 I purchased, based on the fact that it "had OS X drivers". Unfortunately l'm running into a bit of a snafu here.
    The English website (www.highpoint-tech.com) shows for the RR640 drivers that "Mac drivers are available at http://hptmac.com/cn". This is their Chinese website of all places (why, if it has Mac drivers are they not listed on the English site?). I recently was contacted by their tech support, and they appear to be totally clueless why their driver isn't working.
    Ya see, the one they link to is this one:
    http://www.hptmac.com/US/productfiles/HPT-Quad-eSATA-mac-v100-100120.dmg
    But it's on the Chinese website. Yay?
    So here's the issue: The .kext file's info.plist shows an IOPCIPrimaryMatch entry of "6441103". Breaking that down, the 1103 is the Marvell 9128 SATA controller (there are two on the card, oddly at x1 link width). The 644 is the ID of the card the driver is looking for in order to load. In other words, the driver (RR64x.kext), from the installer packaged labeled "RR644M" (for RocketRAID 644 Mac), will only see the RR644, but not the RR640 which I have. Unfortunately, injecting the proper IOPCIPrimaryMatch entry into the .kext file renders the .kext useless as it becomes a file that has "been installed incorrectly and cannot be used", because a user (me) modified it.
    Has anybody gotten this card to work in a Mac Pro in OS X (it works fine in Windows on a Mac Pro) other than the inability to use CTRL-H to activate its BIOS configuration utility at bootup)? And if so, what driver are you using?
    I've lost three days worth of work/"fun time" to trying to figure this out. I don't know why the card is so hard to get working, since functionally it's identical to the 644, only instead of eSATA ports they're all internal. Even the controllers used are the same, as is the link width of the card itself (but apparently not the firmware?).
    I knew HighPoint had ridiculously bad support, but their hardware in general is rock solid (once you get it up and running). I kind of want my Vertex 3s to finally run speedy. I'd really hate to have to get a 6Gbps SAS card instead (and it'd have to be bootable which is EXPENSIVE) in order to plug into my Mac Pro 1,1's SAS cable that it uses to control the four internal HD bays (though that would give the HD bays native 6Gbps speed!).

    Highpoint RR Quad eSATA for Mac is sold on Apple Store
    http://store.apple.com/us/product/H1113LL/A
    with 4 favorable comments, from one that flashed the firmware for EFI32 to be bootable (odd, as they said they had "Early 2008" which does not jive), a few with 2010 models.
    Sonnet, FirmTek or other with 6G PCIe controller IF it does not need to be bootable (you said you wanted that); and, you aren’t going to be pushing for really high performance with a single SSD.
    If you want to stay with Highpoint (exchange?) HPT links to Apple product page -
    RocketRAID Quad eSATA 6Gb/s for Mac $249
    http://www.hptmac.com/US/product.php?_index=65
    What I did find were these Highpoint downloads:
    http://www.hptmac.com/US/product.php?_index=57&viewtype=download
    Driver version 1.0 - which you already have
    http://www.hptmac.com/US/productfiles/bios_driver/HPT-Quad-eSATA-mac-v100-100120 .dmg
    There is an EFI zip file, maybe you need to flash yours.
    Highpoint Mac support page: from 9/2009
    http://www.hptmac.com/US/product.php?_index=57&viewtype=download
    Lion compatible products page:
    http://www.hptmac.com/US/categories.php?compatibility=18
    Highpoint Lion Support Mac
    http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
    Amazon (USA) also sells the same card carried by Apple Store -
    http://www.amazon.com/HighPoint-Quad-SATA-6Gb-Mac/dp/B003MXCZMI/
    Barefeats 6G SSD (ATTO Express R644, RocketRAID 2721) support for 6G SSD
    http://www.barefeats.com/ssd6g02.html
    Barefeats older 3G RocketRAID
    http://www.hptmac.com/PDF/RocketRAID_eSATA_For_Mac_Barefeats_Review.pdf
    http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
    And what I found about RR640 (I have 620s in my PC but the extra 40 seconds to the boot time and stability were a no-go for me)
    The Highpoint RocketRAID 640 is a PC card (only).
    http://www.bit-tech.net/hardware/2011/01/04/high-point-rocketraid-640-review/1
    http://www.newegg.com/Product/Product.aspx?Item=N82E16816115077
    http://www.highpoint-tech.com/USA_new/series_rr600.htm
    Windows – Linux – FreeBSD driver support (only)
    Apple Community –
    Has anybody gotten a RocketRAID 640 working in a Mac Pro?
    https://discussions.apple.com/message/15909237#15909237

  • Ipad apps wont work after downloading update 5.1.1

    My I pad apps wont work after I downloaded OS update 5.1.1
    I have tried restoring, but it doesn't solve the problem.

    Hi
    I had the same problem since I updated, the iPad shows "No Sim" I have taken it out, put it back in after cleaning it! All the usual possible solutions that everyone else has tried? So I have not been able to connect for over a week now and I intended to pop into the Apple geek guys to let them have a look, but was scared that they might suggest it would have to be sent away!!! What would I do?. So last night I was fiddling around with the IPad and thought I would try something, AND GUESS WHAT! It works!!!!
    This is what I had done
    1. Take the SIM out of the IPad
    2. Leaving the SIM out, turn the Ipad off using the Home and power button at the same time, do this 4 times
    3. Now insert the SIM back in it then found my SIM
    I cannot confirm the is the ultimate cure, but it worked for me and I have tried all the other possible solutions, it's worth a try?
    Barlow2012

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • Mac mini screen wont work after lion

    My hdmi connection to my tv wont work after installing lion last night. It worked once last night but hasnt worked since. All cables are in tact and computer is set up the same. I cant even see anything to fix it!

    I called apple - I'd have been in trouble if my mac had been my only internet access!
    I had to reset the P-RAM
    as so:
    mac is powered off
    turn on power then instantly press keys: command option P R
    the mac will chime as usual then on the second chime let go of the keys.
    After this my screen worked again.
    For info - command key is cmd, option key is alt
    I did this with an old mac wired keyboard - not sure if it will work on bluetooth keyboard, but it might.

  • Messages wont work after I received a very long text

    Messages wont work after I received a very long text, it keeps freezing up and wont even let me delete that very long text.

    Remove Messages app from Multi Tasking and make a Reset.
    (Press and hold the Sleep/Wake button and the Home button together for at least ten seconds,
    until the Apple logo appears.)

  • Has anybody got their 808 to work on Consumer Cell...

    Has anybody got their 808 to work on Consumer Cellular?
    Consumer Cellular uses the AT&T network.
    My phone works making or answering phone calls.
    I can access the internet from Wi-Fi.
    But I cannot access the internet from 3G.
    Consumer Cellular emailed the settings to my phone.
    I saved them and made them the default.
    I re-booted my phone.
    But I get “Connection failed.  Connection unavailable.”

    Have Consumer Cellular send you a configuration text message.
    When you open the text message:
    Your Pin Code is the last 4 digits of your phone number
     select SAVE from Options
    Set as Default Settings? Yes
    Then:
    Settings
    Connectivity
    Settings
    Network Destinations
             (you can copy to another destination, change Priority, etc.)
    Internet
       your home Wi-Fi
       ConsumerCellular
    WAP Services
       your home Wi-Fi
       ConsumerCellular
    If you see AT&T anywhere, delete it.
    Moderator's notes: You can get the micro SIM card from your operator, it is not advisable to cut it yourself as it may not work or cause damage to the device.

  • Has anybody else's itunes stopped working since the new download?

    Has anybody else's itunes stopped working since the new download?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
    (99096)

  • LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system

    HI,
    LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system.
    I had LR 5,7 running and was not installed via the CC.
    What to do
    Thanks.

    Hi Ridder,
    Please refer the solutions given in the following article.
    Lightroom doesn't launch or closes automatically after splash screen
    Hope this helps.
    Regards,
    Sumit Singh

Maybe you are looking for