Has anybody figured out how to make flip4mac work in Lion? I get sound but no picture

WMV files have worked fine up through snow leopard  but now all I get is audio and no video. Have reinstalled newest version of flip4mac but same results

If I recall correctly, the current version of Quicktime X (from Snow Leopard and Lion) does not support external plugins like Flip4Mac. The workaround under Snow Leopard was to install Quicktime 7.x for Snow Leopard (optional download from Apple...good luck finding it these days).  I don't know if that still works under Lion, though.
Probably not very helpful...

Similar Messages

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • Has anybody figured out how to fix the battery consumption with mountain lion (using a MBP 13")?

    I upgraded to Mountain Lion, and yes despite all of the warnings posted in the App Store reviews about the battery life being cut in half, I upgraded my MBP anyway. Chalk this one up to the Black Cloud of "I Told You SO!" My MBP could hold a charge for almost 6.5 hours. Now I'm luck if I can get 3, but in most cases I may get 2.5 hours if I'm conservative.
    Has anyone figure out how to fix this battery problem? Even now after having it unplugged for almost 2 hours...I'm getting the "You are now running on reserve battery power" message. What a freaking joke!
    Any help would be greatly appreciated!

    Open /Applications/Utilities/Activity Monitor.  Click %CPU until the triangle points down beside it.  Make sure it says All Processes in the upper right.  Check for applications taking up lots of CPU time.

  • Can't figure out how to make a working video in iMovie 6.0.4

    So I have a MacBook Pro that was given to me by a friend, and it's from 2006 -- ergo, the older version of iMovie.
    My problem is two-pronged. First, let me start out by saying that the videos I'm making just involve inserting an MP3 and a static image (i.e., they are music videos). And, in the end, I want to upload them to YouTube.
    Problem #1: when my movies have successfully uploaded (this is something that doesn't happen anymore, as I say below) and I view them on YouTube, the static image I've attached to the video disappears after one second. The rest of the movie is sound with a black screen. This is especially confusing, because I watch the videos in Quicktime and VLC beforehand to make sure that the image if there for 100% of the video, and it always is. I've also made sure to export the image from iPhoto (it was infuriating to find out that 6.0.4 makes it impossible to drag and drop images) and, when applying it, extend its length to the length of the song, which I take from iTunes. See image below for what this looks like.
    Problem #2: currently, the videos simply will not upload to YouTube, making me wonder if there is a problem with the way I'm exporting them (even though I have changed nothing in the process since the time they were uploading successfully). I am exporting on Expert Settings, since that's how I did it on my previous laptop (a PowerBook G4 from 2005), and I'm saving the file as a .mov. I've attached a screenshot below showing the specifications of the file.
    Thank you for any help.

    I'm not very familiar with animation using Photoshop. I have a small amount of experience using Illustrator, but not much. I'm not sure what a normal timeline is.
    What I'm trying to do should be very simple. I want to emulate a tv screen flickering on, using 2 white bars that expand outwards from the center of a blackish background.

  • Ever time I make a call on my iPhone 4 my FaceTime icon has a question mark in the middle of it. I can not figure out how to make it go away. Nor can I make a FaceTime call.

    Ever time I make a call on my iPhone 4 my FaceTime icon has a question mark in the middle of it. I can not figure out how to make it go away. Nor can I make a FaceTime call. Do I need to install a FaceTime App on my phone?

    No, your FaceTime is build in, see this article for more info: iOS: Using FaceTime
    Did you enable restirctions for FaceTime in Settings/General/Restrictions ->FaceTime?
    Is FaceTime enabled in Settings/Phone?

  • I cannot figure out how to make the text larger on an incoming email.  The finger method doesn't work and I cannot find any toolbar with which to do it.  I could find nothing in settings also.  Plese help and thank you.

    I cannot figure out how to make the text larger in a received email.  The finger method doesn't work and I can find no tool bar as I can for composing emails.  I can find nothing in settings.  Please help and thank you in advance.

    Hi there,
    Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
    Good wishes,
    John.

  • Can't figure out how to make "sub-tabs" / Too many "top-tabs" / Other ?

    First of all, the website that I am webmaster for is: www.cindydennis.org .
    I am having some problems:
    1) There are TOO MANY tabs at the top. I can't figure out how to make sub-headings on one page...
    For example, I'd like on the "About CDM" page, tabs that can be clicked on to go to other information tabs, but that don't end up appearing on the top (e.g.: having "Remarks" and "What We Believe" tabs go there, but not appear at the top).
    Another example, if you look at the home screen, I'd like to have the link to the "Privacy Policy" and Terms of Service" pages on the bottom, but not have them appear as tabs in the top, too.
    How do I do this, please? I've searched, and can't figure out/___sbsstatic___/migration-images/migration-img-not-avail.png
    2) How do I add "Copyright 2011" automatically? I saw in the Rapidweaver trial version, it automatically adds it when you publish... is there a way to tell this program to do this? Or do I need to type that in on each page? (I don't want to purchase RW... I'm not ready for that yet.)
    Thank you in advance
    Cindee

    Cindee ~ One way to do the copyright notice is to use a Text Clipping — Select (highlight) the copyright text you want to use and drag it to the Desktop. If necessary, change the name of the Clipping icon so that it's more easily identifiable on the Desktop. Then, when you need it in iWeb, simply drag the Clipping icon from the Desktop to iWeb's main canvas.
    By the way, rather than posting your URL here like this:
    www.cindydennis.org
    ...include the prefix to make it conveniently clickable:
    http://www.cindydennis.org

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

    I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

    I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

  • Has anyone figured out how to scan from an HP officejet Pro 8600 after upgrading to OS 10.9.4

    Has anyone figured out how to scan to  a MacBook Pro with 10.9.4 from HP officejet Pro 8600?

    iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
    As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
    For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
    The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
    This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
    Karl

  • Has anybody found out how to change the workgroup name in 10.5?

    I have been trying to connect to XP machine shared folders and it is not working.
    I've tried using smb and it gives connection error or says Ithe user has not permission in the machine
    I've started in 10.4 from backup disk and it is working OK.
    I see that in 10.4 it asked for DOMAIN/ Workgroup name , and this option has disappeared in 10.5
    Has anybody found out how to change the workgroup name in 10.5?

    System Preferences - Networking

  • My daughter has somehow figured out how to register for her own Apple ID but is very underage. She is not giving me the correct info for me to get into her email. She has downloaded some apps that I would not allow. How can I recover her Apple ID info?

    My daughter has somehow figured out how to register for her own Apple ID but she is very underage. She is not giving me the correct info for me to get into her email. She has downloaded some apps that I would not allow. How can I recover her Apple ID info?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • Please Help!  I have been writing using - Pages - app for years.  I still can not figure out how to make single spaces between paragraphs.  Pages automatically double spaces between paragraphs.

    I have been writing on - Pages- app for several years.  Pages automatically uses double space between paragraphs. I can not figure out how to make single space between paragraphs. Tried everything.  Please help!  

    Pages User Guide >  http://manuals.info.apple.com/en_US/Pages_UserGuide.pdf
    Open the user guide then press Command + F on your keyboard.
    Type line spacing in the search field top right corner of that window.

  • After uploading IOS7, all text turned white and is very hard to see.  I can't figure out how to make the text black again.

    After loading IOS7, text turned white.  Very hard to read. Cant figure out how to make it black again.  Thanks for any help.

    chflags -R nohidden /path/to/folder/

  • Trying to enter hotel password and 1st letter is always upper case and password is lower case.  Can't figure out how to make 1st letter lower case

    I am trying to enter a hotel password for internet access.  The password is all lower case, but the 1st letter I type is always upper case and I can't figure out how to make it lower case.  Help?

    The digital keyboard on the iPad uses an "Up Arrow" as a symbol to represent its shift key(s). If it's highlighted, then the next letter typed will be upper-case. Just tap on the Arrow symbol and it should be unhighlighted. Now if you type any letter, it will be lower-case.

Maybe you are looking for