Has anybody here successfully used a zen micro with mac

I called customer service and received a noncommittal "we'll take it back if it doesn't work". I am a mac user (I do graphics and have been using Apple computers for years) but I really don't want an ipod. Please tell me if anybody has tried it!

I'm guessing it won't work as it uses specific drivers.
You could try using a program that others have used with the Zen, which is written by a very kind guy for free. If it doesn't work maybe he'll add support for the Micro also http://www.wentnet.com/projects/xnjb/index.html

Similar Messages

Has any body tried using canon printer driver with Mac OS X v10.7. I just bought a new printer only finding out that I cannot use it. Any suggestions. Thanks

I just bought a canon pixma iX6540 printer only to find out that the driver is not supported. I am using Mac OS X v10.7. Can someone help please. Thanks

Although it mentions OS 10.6 on the link, have you tried downloading the latest drivers - if you haven't already - from the Apple Support site, maybe they'll work:
http://support.apple.com/kb/DL899

Playlist in zen micro with playsforsure firmw

I'm using a zen micro with the 2..02 firmware... and napster to go... napster to go takes forever to transfer my tracks so usually I just use WMP 0 as a standalone... The question is... why can't I view playlists that I created on the fly inside my player in WMP0.... I've already accepted the fact that you can't delete most of the mandatory Napster playlists without deleting the tracks that they are composed of... and that kinda sux... but I thought that you would at least be able to view the playlists that you created on your player in WMP 0.... Is there something that I'm not doing?

WMP0 does not handle playlists properly, well not at all, so it will not work with any device the way its intended to do. Just got to sit back and wait for the next WMP update that Microsoft releases, but this problem was posted on their KnowledgeBase since March I believe so they are well aware of it.....

Help: Problem using Zen Micro with Yahoo Unlimited Music Serv

I get a "Error reading device contents: The Data is Invalid" message when I try to synchronize my Zen Micro with the Yahoo music engine. When I first connect my Zen via usb, the Yahoo engine recognizes the Zen Micro but it is unable to read the contents of the Zen prior to my synchronizing. After trying to read my Zen for a while, I get the pop up message described above. I am using version 2..02 zen firmware and version .0..4 of the Yahoo engine.
Has anyone experienced this problem before? Does the Zen Micro actually work with the Yahoo service?
Thanks

Here is the Internet address for one of the forums for Yahoo Music Engine. You might find some possible solutions here.
http://grou<br />
<br />
<br />
p.../yme-feedback/
Best wishes.
luvmyrescuedogs
Message Edited by luvmyrescuedogs on 08-0-2005 07:46 PM

Use a Zen Micro without the batt

hello, i would like to know if there is any way to use a zen micro without the battery inserted via usb cable, because i have a 6gb micro that i don't use, the battery died, and i would like to connect it to my amplifier, but all the micros i have came without the power adapter,wich would work. My computer's motherboard suplies power trhough usb even when the pc is off, so i woudn't even had to turn it on to hear music, but, unfortunely, micro's don't work without battery when plugged to the usb cord, right?. i like to know if i can tweak something in the micro to do this...please help me...

It remembers as long as it has power. This kind of thing has been discussed before, but not in this situation, but it's still the same....
If you unplug your Micro before it's gone into it's deep sleep slumber mode, then it will forget, and start back from it's LAST deep sleep mode. However, if you let it go into the deep sleep mode, then you can unplug it, and put your battery into it, and it will be at the same point it was when you just turned it off.
(by the way, not to thread jack, but this is my 50st post. Wow).

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect. No problems when i used with Snow Leopard. I upgraded: Now is Kreonika not happy. Not happy at all!

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!

In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you?

Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

Hi,
I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Has anybody gotten a RocketRAID 640 working in a Mac Pro?

I have a RocketRAID 640 I purchased, based on the fact that it "had OS X drivers". Unfortunately l'm running into a bit of a snafu here.
The English website (www.highpoint-tech.com) shows for the RR640 drivers that "Mac drivers are available at http://hptmac.com/cn". This is their Chinese website of all places (why, if it has Mac drivers are they not listed on the English site?). I recently was contacted by their tech support, and they appear to be totally clueless why their driver isn't working.
Ya see, the one they link to is this one:
http://www.hptmac.com/US/productfiles/HPT-Quad-eSATA-mac-v100-100120.dmg
But it's on the Chinese website. Yay?
So here's the issue: The .kext file's info.plist shows an IOPCIPrimaryMatch entry of "6441103". Breaking that down, the 1103 is the Marvell 9128 SATA controller (there are two on the card, oddly at x1 link width). The 644 is the ID of the card the driver is looking for in order to load. In other words, the driver (RR64x.kext), from the installer packaged labeled "RR644M" (for RocketRAID 644 Mac), will only see the RR644, but not the RR640 which I have. Unfortunately, injecting the proper IOPCIPrimaryMatch entry into the .kext file renders the .kext useless as it becomes a file that has "been installed incorrectly and cannot be used", because a user (me) modified it.
Has anybody gotten this card to work in a Mac Pro in OS X (it works fine in Windows on a Mac Pro) other than the inability to use CTRL-H to activate its BIOS configuration utility at bootup)? And if so, what driver are you using?
I've lost three days worth of work/"fun time" to trying to figure this out. I don't know why the card is so hard to get working, since functionally it's identical to the 644, only instead of eSATA ports they're all internal. Even the controllers used are the same, as is the link width of the card itself (but apparently not the firmware?).
I knew HighPoint had ridiculously bad support, but their hardware in general is rock solid (once you get it up and running). I kind of want my Vertex 3s to finally run speedy. I'd really hate to have to get a 6Gbps SAS card instead (and it'd have to be bootable which is EXPENSIVE) in order to plug into my Mac Pro 1,1's SAS cable that it uses to control the four internal HD bays (though that would give the HD bays native 6Gbps speed!).

Highpoint RR Quad eSATA for Mac is sold on Apple Store
http://store.apple.com/us/product/H1113LL/A
with 4 favorable comments, from one that flashed the firmware for EFI32 to be bootable (odd, as they said they had "Early 2008" which does not jive), a few with 2010 models.
Sonnet, FirmTek or other with 6G PCIe controller IF it does not need to be bootable (you said you wanted that); and, you aren’t going to be pushing for really high performance with a single SSD.
If you want to stay with Highpoint (exchange?) HPT links to Apple product page -
RocketRAID Quad eSATA 6Gb/s for Mac $249
http://www.hptmac.com/US/product.php?_index=65
What I did find were these Highpoint downloads:
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Driver version 1.0 - which you already have
http://www.hptmac.com/US/productfiles/bios_driver/HPT-Quad-eSATA-mac-v100-100120 .dmg
There is an EFI zip file, maybe you need to flash yours.
Highpoint Mac support page: from 9/2009
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Lion compatible products page:
http://www.hptmac.com/US/categories.php?compatibility=18
Highpoint Lion Support Mac
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
Amazon (USA) also sells the same card carried by Apple Store -
http://www.amazon.com/HighPoint-Quad-SATA-6Gb-Mac/dp/B003MXCZMI/
Barefeats 6G SSD (ATTO Express R644, RocketRAID 2721) support for 6G SSD
http://www.barefeats.com/ssd6g02.html
Barefeats older 3G RocketRAID
http://www.hptmac.com/PDF/RocketRAID_eSATA_For_Mac_Barefeats_Review.pdf
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
And what I found about RR640 (I have 620s in my PC but the extra 40 seconds to the boot time and stability were a no-go for me)
The Highpoint RocketRAID 640 is a PC card (only).
http://www.bit-tech.net/hardware/2011/01/04/high-point-rocketraid-640-review/1
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115077
http://www.highpoint-tech.com/USA_new/series_rr600.htm
Windows – Linux – FreeBSD driver support (only)
Apple Community –
Has anybody gotten a RocketRAID 640 working in a Mac Pro?
https://discussions.apple.com/message/15909237#15909237

Zen micro registration & mac dri

I cant seem to register my zen in order to recieve my benefits! And is there a driver I can use for Zen micro on my mac OS9 ?Please help!!

Can't help with registering. That's best left to the support people. As for the Mac OS9. I don't think so. Officially there is only Windows OS support for the Micro. There are, however, some unofficial apps etc. for Linux and as an offshoot Mac OS X. I think the only way you will get anything under OS 9 is by using Virtual PC with a supported Windows OS or Linux and one of the options for it.
Here are a couple of great links for any new Micor/Zen/Nomad user.
http://www.nomadness.net/ Check out the Forums and Download section for Linux/OSX
http://www.redchairsoftware.com/notmad/ An EXCELLENT alternati've to Media Explorer

Zen Micro with iTu

Hi, is someone can tell if i can use zen micro with iTunes and how do it ? thanks

brotsalami wrote:
as far as i know the itunes agent will not work with the micro. but i don?t know for sure.
It definately works with my wifes MuVo Micro N200. I think it supports all players that has a USB removable dri've feature, so it should work fine with the Micro.

Isn't 38133mb 40gb storage? I have a used 60gb zen xtra with 38133

Isn't 3833mb 40gb storage? I have a used 60gb zen xtra with 3833mb total storage space/free space and I am under the impression that 60gb should be closer to 5833mb, correct? Can anyone help me to understand if this is correct? I just got this unit, I have a zen touch 40gb unit that has 3833mb as its total space allowed and the Zen Xtra 60gb I bought used ( but never used acording to the seller ) has the same storage. Customer support just send a couple of form replys to download new firmware and drivers which I did, but that did not increase the space ( which couldn't be possible, could it's The dri've is fixed space?) Sorry to be such a newbie? Thanks for any help. Marc

Problem is the seller is on that auction site and has an explicit no return, no refund policy. I maybe able to go to squaretrade as he said it was new in opened box, and it was not new as his daughters name was on the settings part of the unit. It does say on the unit 60gb so I guess my next question is it possible for him to have opened the unit and replaced the 60gb harddri've with a 40gb? I also assume that this unit would not be able to be fixed or replaced under warrantee even though on his description a one year creative labs warantee is in place. I have the unit registered with creative and with the serial number. Does the hard dri've itself have a serial number on it's Thanks again for the help. Marc

Any possibility to record on a ZEN micro with an external m

hi!
is there any possibility to record on a ZEN micro. with an external mic?
i searched the web and found "things" like that for e.g. the ipod working by the usb port of the palyer.
tia

it would act as if the drive is a built-in DVD burner.
http://www.flickr.com/photos/60081959@N04/7717521136/
Here is what a Lenovo Slim USB portable DVD Burner looks like under iTunes on my X220T
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Zen Micro with PC connection Problems and no firmw

I'm running on Windows XP Service Pack 2 and I have Windows Media Player 0.
...and my Zen Micro wouldn't be detected, so I formatted it completely and I tried reloading the firmware. My old Zen Micro with v firmware still connects perfectly well, but Windows just doesn't detect my v2 firmware (now no firmware) Zen Micro.
Advice, please?
:edit:
Windows DOES detect my Zen Micro now...but I still can't do anything with it. It appears as MTP player connected:
http://i3.photobucket.com/albums/y52/bkblade/zen.jpgMessage Edited by bkBlade on 04-25-2006 2:4 AM

bkBlade,
Check this Knowledgebase article SID0053 and make sure the USB registry entry is correct. If you do make changes to the registry base on the Knowledgebase info, then try reloading the v2 firmware again.
Jason

I can't use my Philips monitor with Mac mini

I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor.
My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it connect with my Philips monitor.
I dun know what happen.
Please help!
Thanks!

The two are incompatible, HDMI is a digital signal and VGA is an analog signal. You need a monitor with a HDMI port or a DVI-I port, these are both digital signals. DVI-I gives the best output.

Has anybody here successfully used a zen micro with mac

Similar Messages

Maybe you are looking for