Has anybody installed Ubuntu on External Hard Drive on here?

I'm trying to install Ubuntu 10.04 PPC on to an Western Digital External USB 1TB drive to run on a:
eMac G4
1ghz
1GB RAM
I would like to only use like 40GB of the 1TB External. I get to the part where I can Manual edit partition tables and am lost on how to do this.
Is there a Step By Step guide somewhere or can someone help me with what to do at this step?
Thanks

Re: Partitioning
Is there a Step By Step guide somewhere or can someone help me with what to do at this step?
Look at http://www.kenstone.net/fcphomepage/partitioningtiger.html
 Cheers, Tom

Similar Messages

  • Install data from external hard drive?

    Hi, we have our old macbook data saved on external hard drive (old laptop had water damage but able to retrieve data). I now have new macbook, how do I install data from external hard drive to new macbook? Is it super easy? I didn't want to set up new laptop until I could understand how to install all our old data. Thanks

    Do you have the appropriate cable to connect the external drive to to new Macbook?
    If you do, the rest is easy. Connect the drive and start up the new Mac. The first steps in the setup will be to enter information about yourself, etc. etc. As you proceed you will be asked if you want to bring in data from another place. Just follow the directions, and the Mac Setup Assistant will do everything for you.
    The critical part is making sure the external is corectly connected to the new computer.

  • Can programs be installed on an external hard drive with my mac pro?

    Can programs be installed on an external hard drive.  I am running low on space.  Final Cut Pro X spins off the rendering files which takes a large chunk of space.  Like to at least have those rendered files on an external drive, but can find that option to make it happen.
    Hardware Overview:
       Model Name:   MacBook Pro
       Model Identifier:           MacBookPro10,2
       Processor Name:        Intel Core i5
       Processor Speed:       2.6 GHz
       Number of Processors:           1
       Total Number of Cores:           2
       L2 Cache (per Core):   256 KB
       L3 Cache:        3 MB
       Memory:          8 GB
       Boot ROM Version:     MBP102.0106.B07
       SMC Version (system):           2.6f59
       Serial Number (system):         C02L250VFFRP
       Hardware UUID:          B26BB020-5346-5A3E-BE36-8D63AAF041C4
       Sudden Motion Sensor:
       State:  Enabled
       Hard Drive APPLE SSD SD256E:
    Kent Mechem

    Hello Ian. I am currently using Lion installed on a WD My Passport 500Gig drive connected to my MBPro via USB, which is still running 10.6.8. Like you I am not prepared to lose all my currently functioning Mac, but also like to see how the new OS runs before making the total switch, maybe when it gets to 10.7.2
    So after you download Lion and select to run the installer it will show you which disk to install on, being the default SL drive you downloaded Lion with. But here you can click Other Disk and select the external HD. The installer will run and then boot into the external drive to complete the installation. From then on you can use Startup Disk or the Option key to select the preferred OS.

  • Can Flash Player be installed on an external hard drive?

    I have this game I am trying to install on an external hard drive that requires Flash Player and even though it is installed on my computer the game keeps popping up with Flash Player is required for this install. Would you like to install it now? Is there any way to install Flash Player on my external or get the game's installer to recognize it being on the hard drive. I don't want to install the game to my computer. Thanks for any help.

    Flash Player is installed on the Windows system32 and syswo64 folders; it cannot be installed anywhere else.
    What does that game require: the ActiveX control, or the plugin?  If in doubt, install both.

  • Can I install onto an external hard drive + run off it?

    Can I install onto an external hard drive + run off it?
    If possible, will the system run at the *same* speed as the built in hard drive?
    ALSO: Am I correct in saying that if I replace my current hard drive with an SSD one?
    If so: that *****  
    Thanks
    Omar

    OS X doesn't matter what disk you boot from, as long as it can be formatted properly in Disk Utility. You can boot from a USB stick drive if it's big enough.
    Thunderbolt would be the fastest, the drive would be the limiting factor there. You can find Thunderbolt drives like these at stores like macsales.com. But USB 3 might also feel fast enough.
    If you have boot systems installed on many drives connected to your Mac, the way you tell the Mac which one to use is to hold down the Option key at startup. This will present icons of all the connected drives you can boot from, then you just pick one and go.

  • Installing Windows to external hard drive or using parallels?

    Will installing Windows on external hard drive protect mac from viruses better than parallels? Which option is more sound, installing windows on external hard drive or using parallels? My main concern is mac protection. Thanks

    Hi,
    Thank's for your reply.
    Using Parallels and creating a virtual machine, I think it should be possible installing Windows to an external hard drive, shouldn't it?
    Message was edited by: Oleguer Vilella

  • Trouble opening iPhoto library in Aperture that has been transferred to an external hard drive.

    I am having trouble opening my iPhoto library in Aperture now that it has been transferred to an external hard drive.
    Versions being used:
    MacBook Pro 13-inch mid-2010
    OS X v. 10.9.1 Mavericks
    Aperture v. 3.5.1
    iPhoto v. 9.5.1
    Order of events: got MacBook > took pictures > created an iPhoto library > upgraded to Mountain Loin > added more photos to iPhoto library > upgraded to Mavericks > purchased and downloaded Aperture > copied iPhoto library to a 750 GB WD My Passport.
    When attempting to switch to this iPhoto library while using Aperture an error stating, “Unable to Switch to Library. Aperture cannot switch to the selected library because the file system of the library’s volume is not supported.”  iPhoto can access this iPhoto library with no problem.  What is missing? Any suggestion would be greatly appreciated.

    “Unable to Switch to Library. Aperture cannot switch to the selected library because the file system of the library’s volume is not supported.”
    Aperture 3.5.1  is checking for file system compatibility, iPhoto not always.
    copied iPhoto library to a 750 GB WD My Passport.
    Check the filesystem on your WD drive. Did you remember to format the drive for MacOS, before you copied the library there? It needs to be formatted MacOS X Extended (Journaled) to be used with any photo library. iPhoto may be able to open the library, if the filesystem is not supported, but you are risking data loss.
    You can reformat the drive with Disk Utility, if the file system is wrong (after backing up your iPhoto library to a different drive). See:
    iPhoto: Issues with FAT32-formatted drives
    Format external drives to Mac OS Extended before using with Aperture
    Regards
    Léonie
    You see the File System in the Finder's "File > Get Info" panel, when you select the drive in the Finder and use "File > Get Info" from the main menu bar or press cmd-I.

  • HT4796 I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive.  What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

    I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive.  What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

    iTunes: How to move your music to a new computer

  • Something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    Bus powered external drive?
    Backups?
    Does Disk Utility can see and repair the drive or not?
    Also try here in future:  MacBook Pro

  • Installing Arch on external hard drive

    Hi guys,
    I'm trying to install Arch on an external hard drive, and making it bootable. However, I can't install grub on it. The grub installation failed during setup, and when I run grub-install, I get:
    /usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
    /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..
    /usr/sbin/grub-setup: error: will not proceed with blocklists.
    ubuntu@ubuntu:/$ sudo grub-install /dev/sdb3
    /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea..
    /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..
    /usr/sbin/grub-setup: error: will not proceed with blocklists.
    How can I boot without grub, or make grub work?

    Well I tried installing GRUB onto MBR first, but it didn't work. That's when I tried to put it onto a partition, but that didn't work either, same message.
    fdisk -l /dev/sdb:
    WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
    But reading with gparted (in their order on the disk):
    /dev/sdb1    ext4     142.58GB
    /dev/sdb3    ext4      3.91GB (that's the Arch / partition)
    /dev/sdb2    ntfs      151GB

  • How to re-install Yosemite without external hard drive?

    My  rMBP has been having battery issues the last couple of months, and I believe that it's due to my installation of Yosemite.  I'd like to do an fresh install of it, but I don't have enough money to buy an external hard drive for Time Machine. 
    What are some other ways to install Yosemite with just the MBP itself?
    Thanks!

    Restart with the Command and R keys held down and perform the installation and other functions normally. This process doesn't directly use the external drive, but if a problem occurs and you don't have a backup, you may lose some or all of your data. If you choose to erase the partition with Yosemite on it, you will lose all of the data on that partition.
    (125873)

  • How to install Leopard on external Hard-drive

    hi can somebody tell-me how to install Mac OS X 10.5 on to my external Hard drive????

    Well, an USB HD is useless with a PPC computer because you can't boot with it. So, installing OS X onto it is an exercise in futility. Return it for one that has FW or get another one. Amazon is offering an ext enclosure + 1 TB Seagate for $130 USD at http://www.amazon.com/Macally-G-S350SUA-Hi-Speed-FireWire-Enclosure/dp/B000P1NAM O/ref=pdbbs_sr1?ie=UTF8&s=automotive&qid=1240278380&sr=8-1

  • Installing Tiger on External Hard Drive will erase my data?

    Hello there!
    I've installed Leopard on my internal hard drive and as there are some applications that will not work with it I'm thinking of installing Tiger on an external hard drive and boot from there when I need. BUT, this hard drive has information on it that I don't want to erase.
    Will the "Install Mac Os X" option (or something like that) keep my files stored on the external hard drive?
    Hope this make sense.
    Thank you for your help!
    Julieta

    See if the Archive and Install feature, can be used...
    http://docs.info.apple.com/article.html?artnum=107120
    As long as the info on the external is in folders that have names that aren't going to get replaced, you'll be OK if you don't Erase & Install.

  • How to create bootcamp Mavericks /Ubuntu in external hard drive

    Dear all
    I would like to make in an external hard drive a bootcamp with
    Mavericks in first partition
    Ubuntu in second partition.
    Is it possible to use bootcamp to do that? so I see Apple documentation  is talking about  on mac os and windows but nothing about linux systems

    craigbuckley wrote:
    all the files and events in final cut are still on my internal, so my internal drive is still full.... Do I have to go and delete everything off my internal?
    In addition to the excellent advice to keep your media on an external HDD, you need to make sure that your system (boot) drive has a decent amount of free space if you want to have a satisfactory editing experience. Many people recommend not going below 20% free space. That's especially so for the boot drive, but as you fill up the external, its performance will also slow. Ideally, we would have separate media and backup drives,
    You don't need to "delete everything". Rather, you first figure out what needs to be moved. You copy those files to the other drive and then verify that all the files you copied are in two locations. At that point you can delete those files from your boot drive.
    Good luck.
    Russ

  • Mac Mini has crashed - Disk Warrior and External Hard Drive Question.

    I have Mac Mini that has crashed.  I purchased Disk Warrior and was able to boot from the CD.  Disk Warrior allowed me to see my files again but there is no way I can move them back onto my hard drive.  I cannot grab them.  Before I go into specifics....If I purchase an external hard drive and try to hook it up to my Mac Mini, will I be able move these files to this new external hard drive?  Is this a possibility?
    Or will my new external hard drive need to go through a set up phase - which might be impossible since hard drive I'm trying to take the files from is technically dead?
    Sorry - I'm a novice at these things.

    Hello, no apologies needed for being a novice, great you asked!
    YES, depends where you buy the Drive, it may need Formatting first to Mac OS Extended...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html
    These generally come Mac Ready, & get Firewire if you have a Firewire port, much faster...
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Then in DiskWarrior, hold Option or alt key when selecting Internal to repair, that will do the best job of Scavenging the directory & provide a whole new Drive icon to copy or clone your info over to the external drive.

Maybe you are looking for

  • Cannot install Itunes update getting error installation  was interrupted

    today i tried to upgrade to itunes6.04 during the installation i got the following error message. The itunes wizard has completed. The installation was interrupted before I tunes could be completly insatlled. he system has not been modified. to insta

  • Customizing Standard Workflow Log

    Hi All, Good Morning! I'm asking this question from an end user perspective. Is there a standard way to bring the workflow log on the main document screen (for example: ME23n) so that user need not navigate to workflow overview? Also there are many i

  • Regarding status management

    Hi, I have a situation, wherein when a sales order is created, it is assigned a user status of CRTD using status management configuration. My requirement is to track a particular document's user status or system status to trigger a workflow if the do

  • Spotlight not showing files

    Have brand new iMac running 10.8.2. All going great except: 1 Spotlight will list files I search for very quickly top right but I can't get it to 'Show All in Finder', it just does nothing. It means I can't actually locate anything. 2 I've noticed si

  • I received my EOS M today. I cannot access the Advanced functions - P, Av, Tv, ISO setting etc.

    I cannot access these functions.  In the (camera photo) setting on the main dial, I only see options for Creative Auto,  The promised icon on the upper left of the screen does not seem to appear, nor does either the printed manual or the pdf manual m