Has anybody know for program that runs Tomoview on Mac

Dear All,
Does anybody know for a program, that can runs Tomoview on Mac computers?

It is not available for the Mac unless you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Similar Messages

Anybody know a reseller that would download/sell a firmeware for 2504 wireless controller or what service to buy to be able to get it?

anybody know a reseller that would download/sell a firmeware for 2504 wireless controller or what service to buy to be able to get it?

Be aware that you do not need to purchase SmartNET for your APs.
Thanks for the ratings, Marek.
Be aware that nearly all 802.11n APs (some exclusion to AP1250) are covered under the new Cisco Limited Lifetime Warranty. Read through the link provided. This is why I posted that you do not need maintenance contract for the APs. The main thing to understand is that if you need to RMA your AP, it'll take 10-business days for the replacement part to be sent.
I have spoken to some Cisco Authorized Reseller and some Cisco TAC engineers who insist that the Cisco LLW don't exist or doesn't apply to BLAH model. Don't be fooled.

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Hi Mark
Was just looking for the answer to this exact question and I just found something that worked for me so don't know if it might be of use to you or you might have already solved your problem! Basically when I was in iMovie and I clicked to import movies from the computer into iMovie and I found the clip I wanted to import, there are a few options. I think it asked which Event I wanted to add it to but most importantly it asked me what file size I wanted...I had originally been clicking Large because it advised me to because it reduces the file size...but just on a chance there I selected 'Full - Original' for size and it imported perfectly into iMovie in it's original vertical form!
Hope this helps!
Bianca

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

That's a very broad question and difficult to answer without knowing more about you requirements.
Try starting on this page Category review: library management software for the Mac |Part I and part II to get a starting point.
regards

Has anybody asked for rma Micro returned with 2.11.

I had to rma my Micro and emailed Creative and asked if they would return my player with firmware 2..02 installed. They emailed back and said that they would write a note on the rma slip to install 2..02 but would not guarantee that it will get done. Has anybody asked for this and gotten 2..02 installed into an rma Micro?

I guess you need to request for 'server file' from verisign ,
put it in your server directory and point
SSLCertificateChainFile to the file.

HT4410 If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?

If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?

Thank you

I got an ipod recently and i bought songs and apps already but i cant even get free things now without it asking for my billing details which i have already put in and i know for sure that i still have money on it

I got an ipod recently and i bought songs and apps already but i cant even get free things now without it asking for my billing details which i have already put in and i know for sure that i still have money on it

You need a valid payment method even for free items. If you know the payment method is valid then contact iTunes.
Apple - Support - iTunes - Contact Us

Has anybody gotten a RocketRAID 640 working in a Mac Pro?

I have a RocketRAID 640 I purchased, based on the fact that it "had OS X drivers". Unfortunately l'm running into a bit of a snafu here.
The English website (www.highpoint-tech.com) shows for the RR640 drivers that "Mac drivers are available at http://hptmac.com/cn". This is their Chinese website of all places (why, if it has Mac drivers are they not listed on the English site?). I recently was contacted by their tech support, and they appear to be totally clueless why their driver isn't working.
Ya see, the one they link to is this one:
http://www.hptmac.com/US/productfiles/HPT-Quad-eSATA-mac-v100-100120.dmg
But it's on the Chinese website. Yay?
So here's the issue: The .kext file's info.plist shows an IOPCIPrimaryMatch entry of "6441103". Breaking that down, the 1103 is the Marvell 9128 SATA controller (there are two on the card, oddly at x1 link width). The 644 is the ID of the card the driver is looking for in order to load. In other words, the driver (RR64x.kext), from the installer packaged labeled "RR644M" (for RocketRAID 644 Mac), will only see the RR644, but not the RR640 which I have. Unfortunately, injecting the proper IOPCIPrimaryMatch entry into the .kext file renders the .kext useless as it becomes a file that has "been installed incorrectly and cannot be used", because a user (me) modified it.
Has anybody gotten this card to work in a Mac Pro in OS X (it works fine in Windows on a Mac Pro) other than the inability to use CTRL-H to activate its BIOS configuration utility at bootup)? And if so, what driver are you using?
I've lost three days worth of work/"fun time" to trying to figure this out. I don't know why the card is so hard to get working, since functionally it's identical to the 644, only instead of eSATA ports they're all internal. Even the controllers used are the same, as is the link width of the card itself (but apparently not the firmware?).
I knew HighPoint had ridiculously bad support, but their hardware in general is rock solid (once you get it up and running). I kind of want my Vertex 3s to finally run speedy. I'd really hate to have to get a 6Gbps SAS card instead (and it'd have to be bootable which is EXPENSIVE) in order to plug into my Mac Pro 1,1's SAS cable that it uses to control the four internal HD bays (though that would give the HD bays native 6Gbps speed!).

Highpoint RR Quad eSATA for Mac is sold on Apple Store
http://store.apple.com/us/product/H1113LL/A
with 4 favorable comments, from one that flashed the firmware for EFI32 to be bootable (odd, as they said they had "Early 2008" which does not jive), a few with 2010 models.
Sonnet, FirmTek or other with 6G PCIe controller IF it does not need to be bootable (you said you wanted that); and, you aren’t going to be pushing for really high performance with a single SSD.
If you want to stay with Highpoint (exchange?) HPT links to Apple product page -
RocketRAID Quad eSATA 6Gb/s for Mac $249
http://www.hptmac.com/US/product.php?_index=65
What I did find were these Highpoint downloads:
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Driver version 1.0 - which you already have
http://www.hptmac.com/US/productfiles/bios_driver/HPT-Quad-eSATA-mac-v100-100120 .dmg
There is an EFI zip file, maybe you need to flash yours.
Highpoint Mac support page: from 9/2009
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Lion compatible products page:
http://www.hptmac.com/US/categories.php?compatibility=18
Highpoint Lion Support Mac
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
Amazon (USA) also sells the same card carried by Apple Store -
http://www.amazon.com/HighPoint-Quad-SATA-6Gb-Mac/dp/B003MXCZMI/
Barefeats 6G SSD (ATTO Express R644, RocketRAID 2721) support for 6G SSD
http://www.barefeats.com/ssd6g02.html
Barefeats older 3G RocketRAID
http://www.hptmac.com/PDF/RocketRAID_eSATA_For_Mac_Barefeats_Review.pdf
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
And what I found about RR640 (I have 620s in my PC but the extra 40 seconds to the boot time and stability were a no-go for me)
The Highpoint RocketRAID 640 is a PC card (only).
http://www.bit-tech.net/hardware/2011/01/04/high-point-rocketraid-640-review/1
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115077
http://www.highpoint-tech.com/USA_new/series_rr600.htm
Windows – Linux – FreeBSD driver support (only)
Apple Community –
Has anybody gotten a RocketRAID 640 working in a Mac Pro?
https://discussions.apple.com/message/15909237#15909237

Is there a programs that can scan my Mac and fix errors

I need a program that can scan my Mac and fix errors

It would be helpful to tell us exactly what errors you need to have fixed.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
See if the above helps fix your "errors."

Switch lightroom serial number for one that works on a mac

I have a current serial number for lightroom that works with windows. I would like to swap it for one that works on a mac operating system

Lightroom serial numbers are already multi-platform. They work on Windows and/or Macs.

Anybody know of a swimming pool design program that runs on Mac operating system?

Anyone know of a swimming pool design software that runs on Mac?

The problem was that I kept getting the black screen of death, once while using Photoshop, the next 3 or 4 times on start-up, I couldn't keep the computer running. Starting it up with the install disk worked, and it seems to be more stable now, however, I haven't really done much in Photoshop since.
I know that Photoshop, especially when I use the Transform tool, will crash a lot, and often enough take the whole system down with it. But it usually works again on restart.
The test comes when I have another batch of photos to process. Unfortunately, business is a bit slow right now, so I don't have anything coming up soon.
Does Onyx do about the same job as Disk Utility? Is it any better? Or just have different options? I did download that one too, and the disk appears to be fine now.

How to know the program that a user is running.

Hello SAPients!
Is there a programmatic way (FM or something else) to know what program is being executed by a specific user?
Thanks in advance.

My full requirement is in this post:
I need to trigger a procedure when a program ends.
If you could take some time and read it I would really, really appreciate it.
Thank you so much for your kind help.

Does anyone know how to convert a Filemaker flat file to some other program that runs on Lion?

I have a flat file of 200 recipes in Filemaker. It is searchable and prints the recipes on 4x6 cards.
How can I get the same funtionality without getting an expensive new version of FM that runs on Lion?

In order to password protect files or folders, you need to create an encrypted disk image. Then what ever is copied to the disk image will be protected.
The directions to do this are here
http://support.apple.com/kb/ht1578
Allan

So... anybody know for sure how AirPlay works?

I've been wondering about this for a while. Seems like there are a couple of ways AirPlay might work:
1) iPhone/iPad device is playing video, you tell it to AirPlay the video on your Apple TV instead, it takes whatever it is playing back, runs it through an h.264 encoder on the iPhone/iPad and sends that to the Apple TV. Requires something like double the Wifi bandwidth than just playing the video on the iPhone/iPad. Also likely requires hardware support in the iPhone/iPad for h.264 encoding, something that isn't present on the Mac.
2) iPhone/iPad device is playing video, you tell it to AirPlay the video on your Apple TV, the Apple TV takes over and requests the video directly from the web site, and your iPhone/iPad just becomes a controller for the video, just sending simple commands to the Apple TV (Play, Rewind, Jump to position X). Requires only the same wifi bandwidth, not 2X. The video could also be played back at a higher resolution than it might have been on your iPhone. However, this method wouldn't support anything that the Apple TV can't handle. So forget playing back games via AirPlay. Only audio and video compatible iwth the Apple TV. VLC couldn't add an AirPlay either.
Anybody know?

My understanding is that there are two components to Airplay and they are Audio and Video.
In the case of a Home Shared iTunes library when running either the iPod or Video applications that come standard with the device these application only allow you to Airplay the Audio in other words you can select speakers other than those on the device. My guess is that Apple never saw Airplay Video as a requirement given that an AppleTV '2nd Generation' can access a shared iTunes Library in its own right.
However if the media has been downloaded aka Sync'd from the iTunes Library to the device then in these circumstances Airplay Video is supported and you can select the AppleTV and play the media. So in summary it is the Video that is accessed through the Home Share arrangements that cannot be Airplayed to an AppleTV. I hope that makes sense.
In the case of a third party application like the ABC's iView 'available from the Apps Store' this allows you to Airplay Video to a AppleTV HDMI connected to a compatible HD TV. This type of connectivity requires a High Broadband connection like ADSL/2 that will run at a minumum of at least 1.1 Mbps '1026Kbps' for best results. These resources are streamed from the Suppliers Server in this case the 'ABC' and not actually downloaded and saved to your Hard Disc.
Another third party program that is also available through the Apps Store is Air Video which allows you to Airplay Videos to an AppleTV which are located in your iTunes Library.
In summary my guess is that Apple did not see the value in having Airplay supporting iTunes Videos given that you can access these resources directly
on the AppleTV.
Ant..

Is there a program that runs that deletes rejected invoices in SAP?

Hi Friends,
Is there any programe Runs that deletes already rejected invoices in SAP?
if it is there , is it run by company code ? how it is working ?
If anybody knows plse let me inform.
Advance Thanks,
Raj

Another possibility is the Auto-Tag from Web feature in MediaMonkey, assuming artist & album details are present. I don't think ether tool fills out the <NumOfTracks> bit so you'll have to do that one by hand or ignore it.
Once you have the extra data in the tags you may find my UpdateTagInfo script useful for getting iTunes to notice the changes you've made.
tt2

Has anybody know for program that runs Tomoview on Mac

Similar Messages

Maybe you are looking for