Has anybody notice the bug of battery percentage is back!

I charged my iphone 4s overnight and the next day i use it all morning  and the battery % was still at 100% after i turn it off and on again it showed 56% has anybody notice this too?

It's not a "problem." The Battery percentage option was never included on the iPod touch.

Similar Messages

  • HAs anybody noticed how the MAc Book Pro Login button function has changed with OSX 10.9?

    Has anybody noticed how the Mac Book Pro login button function has changed with OSX 10.9?

    No one in this forum will...  this is the Mac Pro forum

  • Has anyone noticed a decrease in battery performance?

    Has anyone noticed a decrease in battery performance?  Is this covered under the Apple Care Warranty?

    Hi Dominick,
    The charge capacity is definitely inline with manufacturer's specifications. I will say that the charge cycle is a little high, though.
    129 cycles / 8 months = 16 cycles (per month)
    That's about one every other day. It sounds like you use the machine frequently for short periods of time. Is this machine at home or in an office? Or are you mobile with it to where you don't have access to A/C power or can't be "tied down" to a specific location for any period of time?
    There's no reason to run the machine off of battery power if it's sitting on your desk. Matter of fact, I probably use my "portable" at my desk more than I use it was a portable. You could be racking up unnecessary cycles otherwise. On one of my machines it's plugged into power 98% of the time, I'll run it down and give it a full recharge once a month per Apple's recommendations.
    As AussieDJ recommended, check Activity Monitor to see if anything is consuming unnecessary amounts of CPU usage.
    If this is an 11" MBA, approximately 4 hours of run time is well within reason (based on usage), but that's a little low if this is a 13" MBA. Again usage is important here, web browsers and flash-heavy content consume a surprisingly large amount of battery.
    I'd also be curious to see a consecutive usage test versus these 10-30 minute usage intervals throughout the day. Give the machine a full charge, use it as your normal would for a 2-3 hours and see how that goes.

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Has anybody used the microsoft JDBC 2.0 driver for sql server 2000?

    Hi,
    Has anybody used the JDBC 2.0 driver for sql server 2000 downloadable from the
    microsoft website?When I try using it with WL 6.1 sp1 it says it can't load the
    driver.I try viewing the class file from the jar file using the jar utility it
    gives an unknown Zip format error.Anybody has any solution for this ?If anybody
    has managed to work with this microsoft driver i will be grateful if they provide
    me with a solution.
    Thanks
    Thomas

    Hello Thomas,
    You may want to download the driver again and install it again.
    heres a sample xml tag in the config.xml:
    <JDBCConnectionPool
    DriverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
    InitialCapacity="3" MaxCapacity="12" Name="MSpool"
    Password="{3DES}fUz1bxR0zDg=" Properties="user=uid"
    Targets="myserver"
    URL="jdbc:microsoft:sqlserver://mydbserver:1433"/>
    ensure that you follow the instructions from Microsoft. For using 2000
    driver you will need to have
    Install_dir/lib/msbase.jar and Install_dir/lib/msutil.jar in addition to
    Install_dir/lib/mssqlserver.jar in the CLASSPATH.
    hth
    sree
    "Thomas" <[email protected]> wrote in message
    news:3c91ec0e$[email protected]..
    Hi,
    Has anybody used the JDBC 2.0 driver for sql server 2000 downloadable from
    the
    microsoft website?When I try using it with WL 6.1 sp1 it says it can't load
    the
    driver.I try viewing the class file from the jar file using the jar utility
    it
    gives an unknown Zip format error.Anybody has any solution for this ?If
    anybody
    has managed to work with this microsoft driver i will be grateful if they
    provide
    me with a solution.
    Thanks
    Thomas

  • Has anybody read the Windows user from an Oracle Form?

    Hi
    Has anybody read the Windows Login from an Oracle Form?
    Regards,
    Néstor Boscán

    in 6i, u can use d2kwutil
    in 9i/10g use webutil. Search in this forum and u can see the previous posting.
    Rajesh

  • Has anybody solved the blue screen?

    I have been slaving over my iBook G4 since 8pm PST last night when I performed the update that screwed up my machine. I have spent my day doing this and that and still get blue screen. Has anybody solved the puzzle on what to do to get operating again?

    Hi, I had the "Safari & security update problem". It wouldn´t start no matter I repaired permissions with Disk Utility. So I reinstalled the OSX (10.4.11) That let me keep my files, bookmarks and stuff, but my printer settings were lost. If I replace the actual printer settings with the ones that still are on the "previous systems) folder will it cause me problems again? Hope you can tell, Thanks.

  • Has anybody lost the ability to scroll in Mail?  Other apps scroll just fine.

    Has anybody lost the ability to scroll in Mail?  Other apps scroll just fine. Mail did too, before Mavericks.

    Primary,
    I have shot tethered in 4.1 and planned to do so in 4.2. Which 5D do you have? The first one? FF but 12Megapixels? My 5D's are a Mk2 and Mk3, but only the 5DMk2 was supported in LR4.1.
    Very strange that no one has replied with a setting to check. Please write back here if you found out what happened.
    jonathan7007

  • Has anybody used the transaction RSUOM in 2004s?

    Hello
    Has anybody used the transaction RSUOM in 2004s?
    Documentation found on help.sap.com states that this transaction can help dealing with alternate unit of measure conversion ("equivalent to currency conversion")
    I have created a quantity conversion type in RSUOM but I have not found how to use it - is it in the update rules or the Bex or somewhere else.
    Any thoughts?
    Thanks
    Ioan

    Hello Ioan,
    this functionality corresponds to currency conversion (and is implemented with a similar concept "conversion type"). Both unit conversions within one dimension (e.g. kg -> g) and e.g. material dependent conversions (e.g. kg -> palettes) are supported.
    Currently the conversion can be used within the new transformations and within a planning function. Interactive conversion in query/Bex is not yet supported.
    Regards
    Tobias Hagen

  • So after updating my ipod touch 3rd gen to 4.3.1 i noticed a lag everytime i turn it back on. it stays on the lock screen for minutes sometimes hours. the screen is usually unresponsive the only things usually changing are the time and battery percentage.

    so aafter upsating my touch to 4.3.1 i have noticed everytime i restart the ipod there is a huge lag at the lock screen. the screen only updates itself every three to five minutes only updating the time and battery status. i cannot do anything, usually it will stay like this for minutes sometimes hours. i have tried restoring it and thought updating will fix the problem but it hasn't yet. i currently have ios 4.3.3. recently i had a friend look into the ipod and he told me on a folder called damaged files he found this, 37c3ad com.apple.autowake.plist. how can i fix this?

    Try a manual install following directions in link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD  

  • Has Anybody Used the Canon HF R10 with FCE 4?

    Has anybody out there had success with using the Canon HF R10 in FCE 4?
    Thanks in advance for any replies.
    Jim

    I just confirmed it is a bug in Visual Studio 2013.  Using Visual Studio 2010 (VS10) I have no problems creating a database.  The workaround in VS 2013 is to create a database in VS10, store it on localhost, import it into your Solution using
    SQL Server Explorer in Visual Studio 2013, then you can create an Entity Data (ADO.NET / EF) that connects to the database.  But even this step is a bit of a problem, in that you must first create an empty Entity Data, then populate it by connecting to
    an existing database, which would be the database you imported from VS10.  If you try and connect the Entity Data directly to the database using the Entity Data Model Wizard, nothing seems to happen.  So first create an Entity Data model (empty),
    then connect it to the database you have created with a New Connection using the built in Visual Studio 2013 SQL Server manager.

  • Has anybody tried the Day-Timer iPhone App -  Syncs. Calendar + Todo list?

    I have had my iPhone 3Gs calender sync. break several times,
    and honestly none of them seem to be my "fault". I stumbled across this app. and for $6 I'd take the cowards way out rather than try to fix my current broken sync. problem with iTunes. Has anybody tried this?
    http://www.daytimer.com/iphoneapps/
    Frankly the demo. seems pretty clever:
    http://www.youtube.com/watch?v=s7FDiy5PsfU
    I have not connection with Day-Timer company... other than being a potential customer

    Vlingo doesn't consume all the app memory space itself... it can be used by a number of factors, including the browser cache.
    Your unintall of Vlingo also caused a reboot of the device in which all the free memory space was cleared, from routine use of the BB device.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Has anybody modified the Aperture Web Themes for a Fluid Grid or Responsive Web design

    I have had some experience modifigying Apple's WebThemes inside Aperture in
    Aperture.app/Contents/Resources/WebThemes
    I would like to create or modify an existing Web Theme in order to have my site follow the Fluid Grid principles of Responsive Web design.
    Has anybody done this who would like to provide some advice?
    Thanks, in advance.

    Hi jonfreed77,
    People facing similar issue, posted following resolution in another thread recently.
    Please give it a try and confirm if they work for you.
    8. pcepp,
      20 Jun, 2013 8:24 AM in reply to pcepp  
    Report
    I found a solution that worked for me.
    I removed all the fonts that Adobe CC installed out of my Library:Fonts folder and just left in the Apple Basic fonts like Arial, Courier etc... Launched Dreamweaver CC and the CSS designer panel works. I have no idea exactly which font it is, or creating the conflict. All I know is that it works great now.
    |
    9. dogdog63,
    20 Jun, 2013 10:11 AM in reply to dogdog63
    Report
    very strange - I installed Illustrator CC and then I had no more problems with Dreamweaver! No more crashes when close or create files and no more problems with the CSS designer. Error messages during create fluid grid layouts are also gone ...
    Michel:
    I think I figured it out on the Mac. Be sure that Verdana is activated in Font Book. What tipped me off to this was a warning I was receiving when trying to open After Effects. It was saying that the program needed Verdana for the user interface to work. I thought that maybe Dreamweaver needed Verdana too. Sure enough! Hope this helps you guys.

  • Port forwarding ea6500 - has anybody cracked the code

    i have just switched from an e3000 to ea6500 and all iPhone / iPad / PC control via port forarding is lost - has anybody made this work?
    i have spent 30m with eChat and 2hr wit helpdesk - they have no idea what they are talking about-

    To test if port forwarding does work on that EA6500 router then you need to use a computer/device outside from you network. Since NAT redirection will not work on this router then you will not be able to ping your WAN ip address even if you have uncheck “filter anonymous internet requests”. What you can do though is to replicate the same forwarding rules that you have set on your old router and use this tool: http://ping.eu/ping/ to check if the port has now been opened.

  • Has anybody edited the /System/Library/LaunchDaemons/smbd.plist file?

    Mac clients don't honour Samba settings for new directory and file creation masks so I thought I would set the Umask value in smbd.plist and that would apply to all clients, Mac SMB clients too.
    Has anybody done that before?
    Best regards,
    Andrus Suitsu

    Apple document http://support.apple.com/kb/HT2202 says:
    In Mac OS X 10.4 and later, advanced administrators can set a separate umask for a specific LaunchAgent or LaunchDaemon by adding a Umask value to the launchd plist file.
    So I think and hope that means that adding Umask setting to smbd.plist would have some effect on how smbd will create files, wouldn't you agree?
    Windows clients already honour the settings in /var/samba/shares and create all directories and files with the specified POSIX permissions. My problem is that OS X samba clients don't honour those settings and use their own umask. I want to solve this on the server, not by configuring each client separately.
    Andrus
    PS. I cannot bring SMB down while people are working on the shares, otherwise I would already know if changing the smbd.plist file helps me.
    Message was edited by: andrussuitsu

Maybe you are looking for