Has anybody noticed that it takes longer to boot up since the last update on my iMac?

It seems to me that bootup now takes extra time to complete on my 21" iMac since the last security update. Is this real, or have I never noticed it before?

Similar Messages

Since the last update of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you check why it taking so long since the update on firefox.

since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.

I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.)

Since the last update, every time I open "Numbers" I get a notice that a font is missing. How can I stop seeing this warning?

Since the last update for "numbers", everytime I open numbers I get a notice that a font is missing. I don't care that it's missing and I would like to not see that message. How can I get rid of it?

A document you had open at the time you quit Numbers has a font that you do not have (probably Calibri). You can change the font to one you have OR close the file before you quit Numbers. Numbers will open files you had open when you quit.
Looks like:
The other thing you can do is check the box "Close windows when quitting an application" in "System Preferences > General"

Hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

Ok, I am having literally identical issues with Marathon Max.
I try to connect, and it says, "Itunes could not connect to the itunes store, Make sure your network connection is active and try again." I have contacted my ISP, and they ran a full check, and sayed I should be able to connect to pretty much all websites. I did the whole "ipconfig" thing and that was no help. I also tried the "msconfig" thing, and it sayed it did not recognize it as any kind of command, internal or external command or operable program or batch file. Whats strange is I can connect from another computer just fine, but when offered to upgrade itunes I declined for fear of the same thing happpening. I am tempted to just upgrade it and thus demonstrate that itunes has a flaw in their upgrade. I will save this computers diagnostics, and the other one's too, before and after the upgrade. I look forward to sending more feedback regarding this matter

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

Guys I have the same problem.
Since I installed iTunes 10.5 I can't play any of my music videos downloaded from the iTunes store.
I can play music ok but no videos. I just click on the videos and nothing happens!!
Help..... is there a remedy???

Hi I've purchased music but itunes won't let me transfer it to my iphone. This has happened since the last update and is happening to my brothers iphone also on his laptop. any suggestions?

HI there,
my laptop recenty went kaput and needed a new hardrive which was installed. When I got it back I downloaded itunes again and then bought some music. I connected my iphone and it would not allow me to transfer the music over to the iphone at all. It allowed me to pull all the music on my phone over to the itunes list which I realised at that point did have my usual music list on it. I can't seem to transfer any music purchased over to my iphone for love or money. This is happening to my brother on his itunes account also and he said it's happened since the last update on his. Any suggestions - I'm quite desperate as this is driving me nuts.
Many thanks,
Sarah

Plug in phone to computer.
in iTunes click on your device and then Music Tab.
Deselect the playlist in question, and click sync
Try your sync again

I have an iPhone 5. always before when i called someone..or they called me the picture of them would take up the whole screen. I LOVED it! I could see it. Since the last update it is just a little "bubble" in the upper right hand corner. Can i change

Hi I have an IPhone 5. Always before when I called someone...or they called and I had a pic set up for them in my contact list..... it would pop up the full size of the screen. I LOVED it! I could actually see it. Now...since the last update...or maybe the one b4 that.... The pic is just a little bubble that floats to the upper right hand corner. Does anyone know if there is a way I can get that full size pic back?

I'm sorry, there is no way to change that. It is a change with the newer iOS 7. You can provide feedback to Apple, like a large group of others have that are disappointed in this at www.apple.com/feedback and click on the appropriate link.

Since the last update Firefox has been crashing constantly and something is VERY WRONG with the update!!!!!!!!! Why?

Since the last update to Firefox, I have had crashes non stop about every ten minutes or so, with very typical use. The update SUCKS and is crashing computers. I am SURE I am not the only one. PLEASE FIX THIS ASAP. I have been a Firefox user forever, but now going to Chrome and Explorer until I hear from you about fixing this issue. Never before have I had this problem with Firefox. Bums me out. But I can't deal with the constant crashes and it is ABSOLUTELY since the last update a day or two ago.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Since the last update I can't get to files that I have up loaded to ITunes on my IPad in pages

Since the last update I can't get to files that I have up loaded to ITunes on my IPad in pages

The people trying to help are just other users like yourself & respond as they can & have the knowledge. I saw your post yesterday, but I was traveling & couldn't answer.
It is not at all clear what you have tried. Launch Pages on your iPad & tap the "+" to get the options to add documents then tap the iTunes icon. If you have added any Pages documents to iTunes you can then tap on it in the next screen to add it to Pages.

Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Has anyone else noticed since the last update to mountain lion, if you pit it to sleep, when it wakes there is no sound. you have to reboot to get sound?

I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Since the last update my iphone 5 can no longer find my devices.

Since I last updated my iphone 5 iOS to 6.1.3, airplay on my panasonic HC-57 dock has stopped working. So has my wireless HP photosmart C4380 printer ePrinter app. The iphone can no longer find either of them. I have tried rebooting. I have tried re-loading the drivers and apps. I have tried everything. Before they worked perfectly. I could play music and print whatever I wanted. I have just tried updating to iOS 6.1.4 and this has made no difference either.#
What is more, I have purchased the iphone 5 30-pin to lightning adaptor from the Apple store, and it wont let me play music on my panasonic dock through I direct connection either. It only allows charging.
Please find a solution as this change in software by Apple has rendered my new panasonic dock and printer useless.

For Starters this a user forum no Apple response to complaints on here
I suggest you start by restoring with a back up and if that fails restore as new
especially if you updated over the air rather than iTunes
A restore will install a fresh iOS 6.1.3 rather than a patch update

My computer has been running "dial up" slow since the last update of Fire Fox. Is there any connection?

My computer was just updated to a higher speed connection and was doing good speed wise even before. Now it takes forever to load or navigate in all capacities, that is until I got to this site and I can click as fast as I can here and there is no slow down. Will go back to my home page and see how bad it is there. My wife has a Mac laptop and she even said that since the new update, Fire Fox has been running a little weird concerning the opening of a new window unexpectedly. Really want to see if there is anyone else that might be having similar issues with their computers after the new update.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

What happened to the "lock" symbol that used to appear when on a secure site? I haven't seen it since the last update, so it's either moved or you took it out. I really miss it!

What happened to the "lock" symbol that used to appear to signify that you were on a secure site? I haven't seen it since the previous update, so it's either moved & I haven't found it, or you took it out. If you did, I want it back!

It's stuck on a yellow question marked "multimedia audio controller." It doesn't like the CD drivers or the drivers snarfed from the aborted "you don't have an sb controller installed" pull from windows\temp\CF whatever it was. It's 3am and I've been trying to get this stupid thing running for 7 hours now. I'm going to bed. I will see if it is any smarter tomorrow morning.
It was running great until I did an "update from the web." If I hadn't have done that I'd have no complaints. Now it's hosed and I can't even get back to where I was before. I'm not impressed with creative's installation procedure.
However, there are many people complaining about the "you don't have an SB installed" problem. Creative needs a "delete everything" button, and an "install all new drivers" button. Take a page out of ATI's book in the number of headaches created by windows installer and come up with a way to fix them yourself. ATI did. This would at least get me back to the BSOD, which right now I'm longing for.
This is on a shuttle st6g4 with a disable ac97 sound nonsense with those drivers removed.

Has anybody noticed that it takes longer to boot up since the last update on my iMac?

Similar Messages

Maybe you are looking for