Has Anybody seen this VPC error on the 5k?

Ok, my VPC is up and working for all my devices except my connection to the uplink switch. It is a sinle 3750 with port channles consisting of 4 interfaces. It is connected to two 5010s. I show the following error when I show VPC
"vpc port channel mis-config due to vpc links in the 2 switches connected to differnt partners"
Google does not have much on this error and this is the first time I have seen this. Any idea on what might casue this?
Thanks for any help.

Hi Justin,
I have not specifically come across this error before, but it seems to suggest that both your vpc peer devices do not recognise the 3750 as a single switch, but two separate entities, thus perceive the links as separate. Is the 3750 a stack of switches where you have distributed the etherchannel uplinks across seperate switches in the stack, commonly referred to as cross-stack Etherchannel?
Ensure that all four uplinks on the 3750s are configured within the same port-channel group using LACP (mode active), similarly that the N5K uplinks are configured or associated with the same port-channel and vpc identifier. Could you post the configuration of your uplink from the 3750(s), and N5K uplinks to the 3750 and peer-link and keep-alive link.
If you do a show interface trunk on the N5K, do any vlans show not forwarding and that are err-disabled, this suggest that the incorrect VLANs are not consistent across the uplinks.
Hope this helps.
Allan.

Similar Messages

Illegal Load factor 0.0 -- Has anybody seen this?

Hi
I am getting this weird error once in a while.
java.lang.IllegalArgumentException: Illegal load factor: 0.0
     at java.util.HashMap.<init>(Unknown Source)
     at java.util.LinkedHashMap.<init>(Unknown Source)
     at java.util.HashSet.<init>(Unknown Source)
     at java.util.LinkedHashSet.<init>(Unknown Source)
THis is caused by a call to something as simple as:
Set<IAgent> result = new LinkedHashSet<IAgent>();
Has anybody seen this error before?
I sometimes also get this error while compiling my code inside Eclipse.
I am afraid this could be a hardware related problems since I only see this error while running on my machine with an AMD 4800, windowsXP pro sp 2, sun jdk 1.5.0_06.
It is not persistent. It only happens once in a while.
Any suggestions of what could be the source of the problem?
Marcel

if you are saying eclipse is throwing the error, then somewhere in eclipse they have passed 0.0 as the second argument to the HashMap constructor,
HashMap(int initialCapacity, float loadFactor)and you should post this as a bug here:
https://bugs.eclipse.org/bugs/
If it is your code that is doing it, don't do that.

Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
== This happened ==
Every time Firefox opened
== Don't know

I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

Has anyone seen this Dyld Error Message: Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto Reason: image not found

Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found

Yes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD

Has anybody seen this??

My Samsung Continuum was stuck on a blank home screen and after 2 hrs I finally turned it off. I turned the phone on and the first screen that popped up is a little triangle picture of the Android robot sweeping and it says "Downloading... do not turn off target!!!". I have never seen this screen in the 2 yrs I have had the phone. My wifi and data are both turned off so I'm not sure how it would be downloading anyway. I have not tried to turn it off again, for obvious reasons, but I need my phone.

Hello michaels1mom! Great question. I have to admit that I haven't seen that happen before, but I can certainly understand why such a thing would concern you. Normally, alerts like that are the result of self-initiated software updates. It sounds to me as if that's the case. If I'm right, then you should be able to use the device again normally. Please reach out if you need any other assistance!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport

Has anybody seen this error - Itunes

When i click on any of these tabs Books, Movies, App Store, TV Shows, Music i get the following error.
This is started happening from today.

Forgot to insert the image, here it is.

Has anybody seen this issue?

Hey guys, I've searched along the forum and seen many helpful hints and tips so thanks to all the guys whose ideas I have used and not thanked them for.
Anyway down to business;
My internet, for the most part, is very good. It's 802.11n, I'm using a new airport extreme with a Mac Pro 2.66 and all the kit except the router, (DG834), is Apple. All software updates are applied, and the network is using all the necessary security settings, I have tried it on both b and g and it makes no difference.
Right so every now and then Safari may drop and tell me I'm not connected to the internet. I can click the Airport Icon in the menu bar and can see theat Airport is alternating about once per second between 'On' and 'Scanning'.
Is it time for a visit to the Apple Store?

Right, I'll reply to myself on this one. Been to the Apple store and looked at couple of the iMAcs they have there. They exhibit exactly the same behaviour, if with not quite the same frequency as mine.
I therefore ignored this. After that I came home and removed and them re-applied all the settings from my base station and all of a sudden the Airport speed is back!

HAS ANYBODY SEEN THIS PROBLEM

I have posted this twice under two other threads but nobody has an answer. Surely there is somebody from Adobe that looks at these things.
I have taken a Adobe Reader 9.3.0 msi file along with the other 5 files from a fresh install and ran msiexec /a AcroRead.msi /p AdbeRdrUpd932_all_incr.msp. Everything ran perfect. I then installed the new package that was created through a GPO. No problems.
When I go to Edit>Preferences>Trust Manager>Settings all the settings on that form are grayed out. I also notice that when I open any pdf file and click on a link in that file it blocks the link even if it is another pdf file. There is no option to Allow or open or save or anything just a message saying your blocked and a link to a trust manager help file. 9.30 doesn't do that 9.3.1 doesn't do that but 9.3.2 does.
I have tried installing from Adobe's web site and then downloading the 9.3.2 msp file and running it. That works but incoporating 9.3.2 into 9.3.0 so I can push it out through Active Directory does not work.
I have worked on this problem for days and tried everything I can think of and can not get this to work. Surely someone else has this problem. or somebody know how to fix it. I am desperate Please Help!!!

Hi,
Sorry to bump this post but I seem to be having a similar problem with the latest 9.3.4 release. However I am using the MSI from the FTP site mentioned above.
I download the 9.3.0 MSI, then apply the MSPs for 9.3.1, 9.3.2, 9.3.3 and 9.3.4 using:
msiexec /p file.msp /a file.msi
The resulting install has the options in Trust Maganer grayed out.
Has anyone else had this problem with the latest version?
Thanks
Gareth
Hestia Solar

Has anybody seen this boot problem?

Grey progress bar appears under apple logo during startup. When progress bar seems to complete the process the Mini CPU switches off. Not sure what caused the problem, but the Mac mini was recently upgraded to the latest OS x version 9.5.1. The only previous issue I had was running out of RAM, however this was solved by upgrading from 2GB o 4GB RAM.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???

I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...

Try this article (disable firewall)
http://support.apple.com/kb/TS2799

My iPad will not connect to a computer with the cable which means no updates or down loads. I have tried new cables and different computers. Has anyone seen this before?

Has anyone seen this issue before?

Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it.

Has anyone seen this before,? some import operations were not performed , could not copy the file to requested location

some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?

cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions...

HT4528 The icons on my iphone have all changed to large and I cannot change it back to normal view. Has anyone seen this happen?

My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a normal display even after shutting it off and restarting. Has anyone seen this and how did you resolve?

Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
Thank you,
Deb

I am unable to export my contacts from my iPhone 4 to the hands free unit on my Honda Civic VTI-LN. Has anybody had this problem and found a solution.

I am unable to export my contacts from my iPhone 4 to the hands free unit on my Honda Civic VTI-LN. Has anybody had this problem and found a solution.

Strange that your dealer could not help.
When my car was in for its 6 month service in July/August I mentioned this problem to the dealer service dept (Northway Honda, Bundoora, Vic)
The person booking the car in told me an update to the software was needed and that they would do the update.
I don't know if it was free as there was no specific listing of a software update on the invoice - just a lot of item numbers.
All has been well since

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

Has Anybody seen this VPC error on the 5k?

Similar Messages

Maybe you are looking for