Has anybody solved the blue screen?

I have been slaving over my iBook G4 since 8pm PST last night when I performed the update that screwed up my machine. I have spent my day doing this and that and still get blue screen. Has anybody solved the puzzle on what to do to get operating again?

Hi, I had the "Safari & security update problem". It wouldn´t start no matter I repaired permissions with Disk Utility. So I reinstalled the OSX (10.4.11) That let me keep my files, bookmarks and stuff, but my printer settings were lost. If I replace the actual printer settings with the ones that still are on the "previous systems) folder will it cause me problems again? Hope you can tell, Thanks.

Similar Messages

Has anybody solved the slow wireless connections speeds of the new Imacs

I have just purchased the new imac...and was made aware of the disastrous connections speeds using wireless.. Does anybody know if apple have come up with a solution...or are they just not dealing with the problem?

I am a brand new Mac user with a new 24 inch iMac purchase. Macs are supposed to be hassle free right? Right. No question I was about ready to throw it out the window because the wireless connection to the expensive AP base station was, oh, 100x slower than my Dell laptop side by side about 1 foot away. Nothing changed even if I connected directly to the AP using an ethernet cable. My connection consists of an Actiontec DSL gateway connected directly to my AP extreme that allows wireless to my PC laptop as well as my new iMac. Hours and hours go by until I find this help link on Mac Orchard Forums:
+" Re: My New Intel Based iMac is SLOW+
+« Reply #7 on: May 18th, 2007, 4:57am » Quote Quote Modify Modify+
+WOW!! everyone else with this problem read this! i was having these same huge speed problems using the internet with my new 24" dual core intel imac with 2 gigs of ram and found a posting on another site's thread that fixed it completely.+
+"Try setting your DNS servers to OpenDNS (208.67.222.222 and 208.67.220.220) and see if that helps at all. Maybe the ISP's changes increased the load on their DNS servers."+
+my guess is that somehow these DNS servers work the way tiger likes them to while others dont, i have no clue other than to say it works!!+
+heres a site i found that helped me understand how to change the settings:+
+http://portforward.com/networking/static-Mac10.4.htm "+
With the new Leopard installed I went to the "portforward" link first and followed the instructions exactly to set a static IP address, then I reset my DNS servers with the exact numbers you see above - IT WORKED IMMEDIATELY!!!!! I didn't have to call my ISP or anything, it just worked exactly as it should with both Safari and Firefox. Now this Mac is flying and I will not be tossing it back to Jobs.
Good Luck!

I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this. Anybody have any insight?

I have an iPhone 4 and downloaded all my iTunes music to it. Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

I tried to soft reset my ipod touch with the top button and the screen button. it turned off and went to the blue screen with the apple. now it won't do anything-it has stayed on that scren for 4 hours now. does anyone know how i can fix this?

i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks

See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

I have just tried to update my iPhone 5s to iOS 8.1.2 but my phone has frozen on the update screen what can I do to solve this problem please

I Have just tried to update my iPhone 5s to iOS 8.1.2 but my phone has frozen on the update screen what can I do to solve this problem

Hi Michaelcampbell1980,
I understand that you have run into an issue while updating your iPhone. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Firefox is causing my computer to crash. It is causing the blue screen of death. What can I do to solve this problem?

Mozilla firefox is crashing my computer. It will run and the blue screen would come on because of this I cannot run firefox on my computer anymore. What to do?
== This happened ==
Every time Firefox opened
== June 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; InfoPath.2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

I can not boot past the blue screen, but safe mode is fine...

I have no clue what I did...
Everything was working fine on my iMac (which is from like 2008). I did a file migration transfer from my Macbook pro to the iMac and everything seemed to be good. I could see everything, etc. I went to update the software on the iMac since the computer has not been used in a while. After everything updated and installed the computer restarted and has not been able to move past the blue screen when booting. I can start in safe mode just fine. I have done everything I can find on how to trouble shoot with no luck.
I have reinstalled the OS X
I have held down every combo of keys when restarting the computer
I have made sure the correct disk is highlighted for starting up
I have done everything I could find online...
I do not have the option to erase under the disk utility, or repair?
I am so lost and have no idea what to do. Did the migrate do this? I could use any help! Thank you.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Ibook G4 freezes either when its on the grey loading screen or the blue screen. Sometimes I get it to my desktop but it always freezes in like a minute. Someone help I really need this computer!

I have tried everything online and my iBook g4 wont stop freezing. Safe Mode doesnt even help, it still gets stuck on the blue screen! It either gets stuck on the grey loading screen or the blue screen. Rarely I am able to boot past everything and get to my desktop but after about 30 seconds it freezes again. This laptop was passed down to me and I have no original papers or disks that came with this laptop. I am really trying to figure this out without buying a disk because if it doesnt work I wont be out $60. Someone help I have tried putting it in safe mode single mode holding c down during start up! I need more options.. Please this is the only computer I have right now! (PS: I know warranty has expired a long long time ago)

Hello,
Some information you may or may not have read.
Troubleshooting portables that won't turn on or start up
http://support.apple.com/kb/TA25686?viewlocale=en_US
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Without the disk you are limited on options. It could be an issue with the hard drive and would required the disk to run disk utility.

IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
I can get into safe mode. But no regular startup.
I tried disabling bluetooth, thinking that might be related. It didn't help.
I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
But I still get hung on the blue screen when trying a normal startup.
All help would be appreciated.

Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem.

My phone keeps on looping with the apple logo after the blue screen.

I tried to up date my iPhone 5s thru iTunes and got error statin iTunes has detected an iPhone in recovery mode. you must restore this iPhone before it can be used with iTunes. Saw a video on you tube to use rec boot. So I downloaded rec boot v1.3 to try and kick it out of recovery mode and my phone keeps on looping with the white screen and black apple logo after the blue screen. I tried kicking it out with tiny umbrella and nothing happens. I was able to put the phone back in recovery mode and try using tiny umbrella while still connect to iTunes and hit exit recovery mode. under log tab it says sending exit recovery request to model # of the phone and nothing happen. My last option is to restore to factory settings which I don't want to do cause I would loose every thing. Can some one tell me I'm doing wrong or how to fix it. I would be greatly appreciate it the help. Thanks in advance.

Its looping because the iOS is not bootable which is why the iPhone booted to the ROM recovery mode. Try using iTunes 12's 'Update' option when the iPhone is in recovery mode.

HELP... after 10.4.11 update I can't boot past the blue screen

HELP... after 10.4.11 update I can't boot past the blue screen, and it is pretty frustrating, to say the least. Here's what happened last night:
I installed elgato's eyetv 250, and at the end it asked to update the software. I did so, and when I tried to run it again it said I had to be running 10.4.11. I quickly went over and downloaded the 10.4.11 combo updater to my desktop and proceeded to repair permissions on my disk so I could run the updater.
I repaired permissions and started the updater. It got halfway through updating and said something like it could not finish and stopped. No reason why - it just stopped. I tried it again, and it did the same thing after going about 25 to 30 percent through the updating process. I thought that was very odd, so I checked, and I was running 10.4.9.
I thought I needed to get the 10.4.10 update, so I downloaded the combo updater several times. It would not run, giving me some error message that it would not even open, so I thought I needed to restart my computer to get it to run. I did so.
That's when my computer would not boot. It gets through the initial white screen with the logo in the middle and the revolving circle, and while it stays there for a long time the fans run increasingly faster. They tame down, and then the blue screen with "Mac OS" on it and the blue progress bar comes up. There is no blue progress bar, though... that's where it stops and will not go any further.
Can ANYBODY help me get this thing booted back up? It was so late last night that before I started I didn't back the Mac up, and of course I have a project on there that I need to finish Saturday afternoon for a company.
ANY HELP WILL BE SO GLADLY APPRECIATED. If you can give me step by step instructions on what to do, you will surely be blessed! Thanks for any help,
Barry
Jeremiah 29:11

Hi mrstang, and a warm welcome to the forums!
It sounds like Disk Directory problems.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings.

Has anyone else experienced blue screens and continuous reboots on 5S

I picked up my silver 5S 32 GB at the Verizon store Friday morning. Throughout the morning I noticed that I would hit the home button and it would be powered down. I loaded the .1 patch assuming maybe it was a glitch. I went through the rest of the day with a couple more home button/powered down situations. When I got I home, I plugged it in to iTunes to recover a backup and following the restore it went into blue screen reboot cycle. I performed the soft reset and restored the backup 3 times with the same results. The soft reset was the only means to stop the reboot cycle. I then tried 3 times doing a restore from the cloud with the exact same results. Finally I did a from scratch install thinking my backups were bad. It would stay up awhile but then eventually go into the blue screen and reboot. Sometimes the cycle wouldn't occur in that it would boot up to Home screen following the blue screen. I took the phone to the Apple store the next day, they looked it over, witnessed the blue screen and confirmed there was an issue. I then went to the Verizon store and swapped it for a Space Grey 32GB. I experienced the exact same cycle with the grey so I called Apple. I have spent 3+ hours working through this with a very helpful agent. Turns out a have 2 bad ones in a row! The way I can almost instantly get it to go to blue screen is clicking the Photos icon. Now I am waiting on a second replacement at the Apple store. We have done the soft reset, the hard reset, and the phone restore so we know now that the backup had nothing to do with it as I can do a restore and still have it blue screen after clicking Photos. Anyone seeing anything like this?

Searching for others who might have the same problem increases your chance of finding a solution. Common sense in troubleshooting devices dictates you look for others who might have the same problem in hopes someone already has a solution. Your comment is irrelevant and leads one to think you are spoiling for an argument. Why???

TS1367 I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution a

I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution anybody?

Many times I tried to simply update from 10.5.8 without any success. It starts and after few minutes ...
I used many different install disks (I bought ofiicial release from Mac seller), so I think this is not a problem with wrong version or bad install disk. A few days ago I've got back my computer from Apple technical support and technician told me he had this same problem with system installation

Mac pro still hangs on the blue screen on start up.

Hi.
my mac pro still hangs for ages on the blue screen before the login page where i input my password appears.
i've tried starting up in command-V and that didn't work.
i thought snow leopard was meant to improve, it has just slowed my start up down greatly!
could someone please advise on how to fix this?
thanks
Dan.

Hi boom,
Have you tried downloading and re-applying the latest Combo update?
If not, go to the apple download page, find the Combo update (couple of hundred MB) and install it.
This has fixed various issues in the past for numerous users... it might do the trick for you.
After it's installed and rebooted, repair permissions and reboot again.
Also check to see (using software update) if there are no firmware updates available for you.
And, make sure the OS drive's root is clean, just the basic Applications, Library, System and Users folders, no other mess. If there are 'Previous System' folders from earlier Archive & Install situations you might want to remove those.
Finally, if you upgraded from a PowerPC to Intel using the Migration Assistant the symptoms you are describing are very common, the migration assistant well... it ***** :/

Has anybody solved the blue screen?

Similar Messages

Maybe you are looking for