Has anyone actually gotten the 2.2 Software Upgrade to work?

I know there are numerous threads about the 2.2 Software Upgrade and how it's not working.
Has anyone actually gotten it to work??
If you have, please reply with what you did to make it work, how long it took you, etc..
Thanks in advance!

Thank you, Thank you Henry1---I hit update, unplugged my iPod-touch,and whala!! the update downloaded to my itunes account. I did have to pay when I had first bought it thru itunes- I tried updating, and syncing several times in the past week or two without success. While my ipod was unplugged I also reset my network settings on the ipod under the settings, general, reset menus before I plugged it back in. When I plugged it back in I had to hit update again to download it to the ipod and then sync to get any applications/games to go on to the ipod. Thanks again Henry1--we were racking our brains trying to figure out if we had the "right network settings" on the computer and/or the computer.

Similar Messages

Has anyone actually got the Green Screen feature to work?

Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

Has anyone else gotten the error message when trying to update to ios 6 either through iphone or itunes?

Has anyone else gotten an error message whne trying to update to ios 6 through iphone for itunes?

Uninstall iTunes, and go to http://support.apple.com/kb/DL1577 and get the 64 bit version.

Has anyone actually used the Apple USB "rescue" drive on a 2011 MBA or Mac Mini?

I am getting conflicting information as to whether the $69.00 Lion USB "Rescue drive" will function on a mid 2011 MacBook Air or a Mid 2011 Mac Mini. (Yes, I know it will work on the 2011 MacBook Pros).
1) The local Apple Store Genius Bar personell say that it will not work. It has 10.7.0 Build 11A511, and the 2011 MBA's and Mac Mini's require at least 10.7.0 Build 11A2063 and 11A20621, respectively.
2) Several people have answered this question in the Q&A section of the online Apple Store that it will work on a mid 2011 MBA.
3) I contacted Apple, via the Chat system within the online Apple Store, and they are kinda sure that it will work. But in any case, if I were to get it to work it would ace my recovery partition, and forever NEVER let me use a recovery partition on that Mac again.
So, I am left with the most reasonable avenue to obtain a correct answer. I ask if anyone has sucessfully used this drive on a mid 2011 MBA or mid 2011 Mac Mini.

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

Has anyone actually ready the EULA for Flash Player 10.2?

. . . because I can't get it to open using Firefox
My Adobe Fash Payer has a popup window that automatically tells me I need a new version of Adobe Flash Player and invites me to read the
the End Use License Agreement (EULA)
with a link to this page: http://www.adobe.com/products/eulas/#flash_player
and the link at this address: Adobe Flash Player 10.2 (PDF, 3.3M)
goes to this page:
http://www.adobe.com/products/eulas/pdfs/PlatformClients_PC_WWEULA_Combined_20100108_1657. pdf
But that new page always says (stopped) and shows nothing.

Hi, Since that's the latest update that just came out, I haven't had time to check that. Is the certificate for the DLM perhaps?
What about the certificate with the Flash Player you have Installed currently? What does it say?
Thanks,
eidnolb

Has anyone actually tried the BluetoothDemo demo?

It works fine via emulatorm no matter how many connections I create, but when i transferred it to my K700i it doesn't seem to work. When I select Server nothing happens.
So i tried it on a Nokia 6600 and it works, but then it doesn't show the list of images available for pblishing. It just shows [no data].
I'm trying to make a basic tictactoe program utilizing the JSR-82 API, and I'd like to use the demo as a guide, but if it doesn't work....

Moderator advice: Please don't post to threads which are long dead, and don't hijack another poster's thread. When you have a question, start your own thread. Feel free to post a link to a related thread.
Moderator action: Locking this thread.
db

Has anyone actually received an answer to a question?

I posted a question two weeks ago, about flash player just going to a black screen when maximized to full screen and NEVER received an reply. Has anyone actually gotten an answer to any question by this method?
To ADOBE: I'm sure this is a waste of time, since I doubt anyone from Adobe actually reads these things, but I need to vent. This is the crappiest customer service I have ever experienced. Instead of actually having someone at your company respond to e-mail questions you put the burden of solving YOUR PROBLEM to your other customers. This is a disgusting habit and if there is another option out there other than flashplayer, I'm going to find it, use it and start recommending it to everyone I know. Your company is crap.

Problem I have is the swatch doesn't come along for the ride.
Illustrator makes a gradient from color to clear that can go on top of a raster image and print fine on any output device we've ever owned. InDesign has the gradient feather option which is similar but requires for the two major output devices we have us to either create a TIFF or RIP the item through a prepress system (RAMPage Harlequin RIP, GMG Color Proof's Adobe PDF Print Engine) and send a flattened file. Either way it is Flattened Filesville if you are using InDesign, not if you are using Illustrator.
If you paste just the swatch and not a group you get this:
It's been a gripe of mine with InDesign for years (I know there is a feature request form) and the only solution I know of is to flatten files. I've had several workflow vendors promise a good solution and all of them boil down to sending the file through Product X and spitting out a normalized (flat as a pancake) file to the output device's RIP and turning all their color management tricks off on the output device. I know I can do this, but I don't want to have to RIP every single job that is a one off single – twenties quantity poster through a RIP the same way I do an offset job. It just makes me feel like the textbook Bob Levine adage of "your printer is stuck in 1995" kind of scenario. We aren't talking hokey cheapo output devices too. I'm talking first birthday over two hundred kilobuck output devices.

N80 & HOME MEDIA SERVER, HAS ANYONE ACTUALLY GOT I...

Has anyone actually got their N80 to connect to thier pc's using the Simple server home media server software, if so what firmware have you got on your phone and what access point / wireless router are you using ?.
My N8- connects to my network just fine and can browse the internet just fine too, and I can also query my N80 using a upnp test program and it shows up just fine using that so it shows the upnp is not getting blocked by anything, but some some reason it just will not show up in the Pc software and when you try to connect to the pc with the N80 all you get is searching for devices..........
When I quey the phone with the test program I get :
Description: Multimedia Device
DeviceType: urn:schemas-upnp-org:device:MediaServer:1
FriendlyName: N80
Manufacturer: Nokia
ManufacturerUrl: http://www.nokia.com/
ModelName: Nokia N80
ModelNumber:
ModelURL: http://www.nseries.com/
PresentationUrl:
SerialNumber:
UDN: uuid:f0086e4c-f219-10e0-ae0f-0016BC7B14C
UPC:
So it seems to be working......

its late and i have not read your post in full (too bad).
if you've got the server installed (plus UPnP enabled on your router) you should see your phone. if the server can see it you will see a large picture of the N80 there, check the tabs. if you can't do anything with it (like i experienced initially), make sure you got into your actual phones home network sharing settings. i have to share the phones contents each time i use the sever. this finally makes the server see the phones contents as it displays additional tabs once properly connected (i.e. copy to device, copy from device).
give that a go.

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

It's highly likely that there is a poor connection in the phone - either a pin in the dock connector or internal wiring harness. No software fixes or "tricks" would work, but I would recommend restoring in iTunes, first using a backup and if needed restore as a new phone.
Otherwise, opening and repairing the phone takes some tech knowledge that can't be relayed here. Apple doesn't repair phones other than replacing batteries (not inconceivable that you have a bad battery), but offers "out-of-warranty" replacement (refurb) phones for $149 (US). 3rd party iPhone repair centers may be able to fix it for less. Google to find them,
Tried soft and hard resets
FYI, there's no such thing as "soft" or "hard" resets in iPhone terminology. There is only one phone reset. You'll see those terms thrown around by technically ignorant posters, but they mean different things to different people and are actually archaic, 1980s PC terms that have nothing to do with iPhones.
See the User Guide, Appendix B.

EBuyNow - has anyone actually received anything fr...

Hi everyone,
In early October I purchased the Freetalk camera for a Sharp Aquos TV from ebuynow. At this point they were showing out of stock with an expected delivery date of October 13th. October 13th my EBuynow account said "At warehouse - Will ship shortly".
On October 17th asking what was happening - at which point I was told the cameras will only be in stock on November 5th (so why did it say at warehouse?) and received $2 skype credit as a gift. I was a bit annoyed, but could cope with another 2 weeks wait.
November 1st, I receive an email saying these devices will only be in stock on November 20th. On the 20th, I tried to logging into my account to see what was happening, only for their system to say it didn't recognise my account. Even trying to reset my password returned an "account not found" message.
As a result, I emailed them asking what xxx xxxx was going on (I've been waiting a month for this camera and keep getting dicked around) only for them to reply stock is now arriving on December 5th. Went on their website to confirm and their website says stock arriving on December 6th - so I have a feeling I'm going to get screwed over on this again.
Has anyone actually received anything from ebuynow? Or should I just ring my credit card company and get them to reverse the charges? For me it seems the only thing this "global logistics company" does well is take your money.

Hello,
We have asked eBuyNow to investigate your order status.
Normally this supplier performs well and resolves customer queries promptly.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Has anyone actually got one these to work

I'm not be flip.
I bought an Airport Extreme Base Station and it works like a charm. But I can not even get through the utility to get the Express to work.
At first it would go to the end and then I'd get a message saying an error had occured and the Express could not be found. I'd reset it.
After two or three times of this nonsense the unit disappeared for good. Resetting it does no good -- my Mac simply can't find it.
I bought an Express when they first came out and could not get it to work -- even after hours on the phone with Apple.
But here we are two or three years later and the units still don't work.
Honestly, has anyone ever gotten one of these to work?

Well, you can close this thread. Apple can't help and the product just doesn't work.
Connecting to the Express kills all Internet access forcing me to reboot. The, once rebooted I can no longer connect to the Express.
After all these years you would have thought they would have gotten this right.
For God's sake take this lousy product off the market.

I recently updated my 4s to the newest IOS and I now cannot turn on Wi-fi. HAs anyone esle had the same problem? Is there a fix?

I recently updated my Iphone 4s to the newest IOS and I now cannot turn on Wi-fi. Has anyone esle had the same problem? Is there a fix? I've tries restoring to a previous software update, but it appears the wi-fi was completely disabled and I do not have the ability to turn it on.

Apple is aware of the issue and is expected to release 7.0.3 next week to address iMessage issues.
In the meantime I have found that a good old fashion reset cures it for a while.

I just want to do the iphone 4 software upgrade and I keep going around in circles. Had anyone done this? Thx

I would like to do the iphone 4 software upgrade, but keep going in circles , has anyone done this? thanks

"Going in circles" - are you talking about yourself or something about the phone? What happens in vagueness stays in vagueness.
FYI, > 30 million have successfully updated their iP4.

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

HAS ANYONE GONE OVER THE 2GB DATA PLAN???

JUST WONDERING HAS ANYONE GONE OVER THE 2GB DATA PLAN? IS THAT ENOUGH DATA FOR THE MONTH? EVERYDAY NORMAL USAGE ANY INPUT WILL HELP THANKS!!!

before returning .. i have used my iphone for 10 days and my data usage was 20 MB ! I was scared i will over shoot, so i always used in wifi hotspots and i kept my 3G and data off . ! But i dont think you will overshoot even if you check mails or browse a lot. Unless you want to see movies or video conference.

Has anyone actually gotten the 2.2 Software Upgrade to work?

Similar Messages

Maybe you are looking for