Has anyone been charged a past due on very first bill

I am going crazy nuts with what I'm being charged I get my phone on the very last day of feb.7days later I'm told my bill is past due,how can that be Ive only been with their company one week,this is just the begining.ive been with verizon for 2 monthy I'm still being charged way tooooo much with the plan I have my bill as I was told and even on line it comes up with taxs and everything to 115.00 but mine is at 300.00,I did return the jack pack the same day I got it so that i would not be chargee the early termination charge I was charged for the service and every thing that goes with it.and I was told i would get credit for it still being on my phone and I was given credit My bill I payed in full was 29.88 I had a nice zero balance for three days the on the forth day up pops a bill for the amount of 288.00 with a past due of 181.00 this is insane I,m on ssi and have to buget everythingthis is way too much almost 700.00 in less than three monthsb  Help ive talked to several supervisors not a single one of them has the same answer this last one says its an earl termination charge ok so remove it I returned the device the sameday I got it the policy says to return within 10 days i didnt even wait one day and I didnt evn open it. I am not stupid but I am going insane with billing.

Just a big guess here. when you get service you are charged a device activation fee of I think $30, then there is prorate service for the time you get service till your bill date. Then there is service in advance and if you were within the 14 day return period you will still get a $35 restocking fee and if you sent it back via shipper service the charge for the device will be included.
Since I don't know what plan you purchased or devices other than the hotspot I cannot say what other charges there are on your invoice. I would either go to My Verizon http://www.verizonwireless.com and register fir the web portal and view your bill, and then call *611 from your cell or 800-922-0204 and speak to billing and have them break the invoice down.
There are also taxes and fees each month so that is something else to add to your invoice.
Good Luck

Similar Messages

  • Has Anyone Been Charged for the RSD Repair?

    In all the talk about the MacBook's RSD (Random ShutDown) problems, I haven't read anything about a repair fee. It always struck me as a faulty unit that Apple was fixing to make it as it should be. (That is, the "problem" isn't a result of anything the user did.)
    When I dropped off my MacBook at my local Apple Store, it was quickly checked by someone at the Genius Bar. He confirmed that it was shutting down (mine does it pretty consistently) and set up a repair to replace the Heatsink Kit. I signed the work order and left the store.
    Once I got home and read the work order more carefully, I see that there are prices listed for the parts and labor (the total adds up to $149.06). But next to that it says "Amount Due," and it says $0.00.
    I just want to verify that I won't need $150 with me when I pick up my MacBook. Has anyone had to pay for their RSD repairs?

    My heat sink was also replaced but the next day the computer refused to boot...only a frozen screen with a million stripes of colored lines. I took it back to authorized reseller and they reset PRAM and upgraded to 10.4.8 operating system and charged me nearly $200 usd! I've been arguing with Apple Norway (I live in Oslo) and the authorized reseller. They blame each other and no one refuses to reimburse me. Reseller says, "Apple Care does not cover software issues. It was a software problem. Go talk to Apple."
    I posted on this forum too:
    http://discussions.apple.com/thread.jspa?threadID=695953&tstart=0
    So be careful of a frozen screen or any other software problems!

  • Has anyone been able to link all their contacts with their Facebook info?

    I just got my first iPhone and am seeing an issue: not all Facebook contacts are being synced; specifically, only 27 out of 254. I’ve been reading posts about this here, and it appears a good number of people are seeing this same problem, including a friend of mine with a 5S running iOS 7.  It appears people are under the impression this is due to a change Facebook made, and that only contacts with specific info showing on their profiles will now be synced. I’ve done some testing, and it does at least appear that only Facebook contacts showing an email address on their timeline - other than their @facebook.com address – are synced to my iPhone. Thing is, Facebook contact sync works effortlessly and perfectly for all contacts both on my Windows Phone and on another friend’s old Android phone. It therefore appears this is either an Apple or an Apple combined with Facebook issue, and not a general issue with access to Facebook contact info. I’m primarily interested in fixing this so that each of my contacts show their Facebook profile photo (which also worked effortlessly and perfectly on my Windows Phone).
    I’ve tried various potential solutions like adding Facebook emails to contacts, but nothing has worked so far. Has anyone been able to get this to work? If not, and this is a universal problem with iOS 7+ and Facebook, I’m surprised more people aren’t up in arms and reporting it to Apple and Facebook as something they’d like to see fixed?
    http://www.apple.com/feedback/
    http://www.facebook.com/help/suggestions

    I had no issues activating my iPhone 4s. I just hooked it up to my computer and it did the rest. It was pretty easy and this was my first iPhone, I had the Motorola Droid 1 before that.
    Although I was experiencing problems with calls going straight to Voicemail, even though I wasn't on the internet or doing anything on the phone, so I just got off the phone with Verizon and they had me punch in numbers to reprogram the phone and that seems to have done the trick (i hope).
    I don't know if the above issue happened during the initial activation or if it was just a separate fluke, but there you go. You shouldn't experience any difficulties in setting up the phones.
    Message was edited by: sox575
    I should add that I got my phone in NOV and so I'm not sure if something changed in the activation process that made it faulty. I'm just reading the thread about people having issues activating the phone over the holidays.

  • Has anyone been able to internet share when the internet source is a verizon USB modem?

    I'm on a macbook 3,1 running OSX 10.6.8
    internet is coming from a verizon USB modem/dongle model UMW190.
    I have gone through the steps for internet sharing - created a network, etc.
    My other devices (a roku box and an ipad) are able to see the wifi network i created.  prompts for a password, and i'm able to connect with great signal strength, but no internet!
    Tried every problem solving suggestion i could find on the messageboards.
    No firewill.  Changed the IP address. restarted, etc etc.
    nothing can seem to get my internet working on the other devices.
    If i leave it to automatic, the IP address i get starts with 169. and a message reads
    "AirPort has the self-assigned IP address 169.254.156.212 and will not be able to connect to the Internet."
    Could this be because the internet is coming from a USB dongle?  Is my computer too old?
    Has anyone been able to get their internet sharing working using a verizon USB dongle?
    Any help would be greatly appreciated!

    Update: For the heck of it, i tried connecting using my ipod touch - and it works! able to connect to the network and get on the internet.
    (that was after i changed the IP from automatic 169 to the IP address of the USB modem.)
    The ipad still won't connect (i'm told it may be due to a WEP non-compatibility)
    and i'm not sure what's up with the Roku...
    but it does work on one device.

  • My little Daughter has wrongly purchased some apps from her iTunes store using her iPad. Now we want to cancel the purchase. Our credit card has not been charged till yet. The amount is showing overdue in her account. Plz suggest us how to cancel the purc

    My younger daughter has wrongly purchased some apps from iTunes Store. The credit card has not been charged yet. It is showing overdue amount in her account. Can anyone suggest, how can we cancel the purchases?
    Regards,
    Usman Khawaja

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
     Cheers, Tom

  • Prometric refund not paid after cancelling an exam and my visa card has already been charged USD15 for the cancellation fee !

    Below is the email i sent to prometric following up my refund after cancelling an exam and being charged USD 15 for the cancellation fee, but no one is saying anything up to now or any explanation on when i should be receiving my refund.
    Hi,
    In regards to the above subject field and below cancellation details for an exam 070-681 - 
    TS: Windows 7 and Office 2010, Deploying.
    I have cancelled for the exam and my visa card has been charged for the cancellation fee of USD 15, but i have
    not received the refund as yet.
    Please do the needful so that i can book for another exam as soon as possible.
    Your urgency in this matter will be highly appreciated !
    Sincerely,
    Salim.
    ----- Forwarded Message -----
    From: @prometric.com" <@prometric.com>
    To:
    Sent: Monday, August 25, 2014 1:08 PM
    Subject: Prometric Exam Information (Z29LON501E)
    Dear SALIM,
    Thank you for cancelling your exam with Prometric, a leading worldwide provider of comprehensive technology-based testing and assessment services. Your cancellation request has been received and confirmed.
    Included within this e-mail is your official appointment summary. Please retain this information for your records.
    Included below are answers to frequently asked questions. Please do not reply to this e-mail. For additional assistance, you may visit our website at
    Appointment Summary
    Order Confirmation Number/Document Number: Z29LON501E
    Candidate's Name:
    SALIM MOHAMED
    Candidate Address:
    77852
    NAIROBI, KE-300 00610 Kenya
    Candidate Company:
    Candidate Primary Phone:
    Candidate Email Address:
    @yahoo.com
    Exam Details:
    Program Name:
    Microsoft (070, 071, 074, MBx)
    Exam Name/Description:
    TS: Windows 7 and Office 2010, Deploying
    Exam Number:
    070681
    Exam Language:
    U.S. ENGLISH
    Appointment Date:
    Appointment Time:
    Appointment Duration (HH:MM):
    4:00
    Please note that the appointment duration may include an exam tutorial and client survey.
    Test Site Code:
    KN7H
    Test Site Address:
    57666,00200,1st Floor, Fedha Plaza,
    MPAKA Road Junction, Westlands,
    Nairobi, 00200 Kenya
    Test Site Phone:
    0203744720/
    Payment Details:
    Exam Price/Currency:
    80.00 USD
    Discount (if any):
    0.00 USD
    VAT/GST/Sales Tax:
    0.00
    Date of Payment/Tax Point:
    24 AUG 2014
    Total Amount Paid/Currency:
    -80.00 USD
    Payment Type:
    VISA
    Cancellation Fee(if any):
    15.00 USD
    Reschedule Fees (if any):
    Payment Date
    Amount Paid
    Frequently Asked Questions
    How will I obtain a refund?
    If your credit card has already been charged and you are eligible for a refund, you will receive a refund along with a charge for any applicable fees. If a voucher was used, your same voucher number will be reactivated.
    How can I Check my Appointment Status?
    If you would like to review the status of your appointment, please visit. Choose "Candidate History" then login using your e-mail address and password.
    What if I forget my Prometric Internet password?
    If you forget your Prometric Internet password click on the following link
    You will be asked to enter your e-mail address or user name, then a new password will be mailed to you at the email address you have on file with Prometric.
    How do I update my candidate profile?
    Please take a moment and confirm that your personal information listed above is accurate, as this is how your name will appear on any certificate earned and the address to which all certificates and communication will be sent. To ensure proper
    delivery of your exam and all certification materials, Prometric must have accurate and current information. If any information needs to be updated, please visit  choose "Update Personal Information", then login using your e-mail address and
    password.
    Please note: This address reflects your permanent, home address. To ensure delivery of official correspondence and certification material, you may also provide name and address information in your
    country's official language.
    Can I contact Prometric with specific questions?
    If you have taken your test, plan to take a test with Prometric, or have any other concerns, please follow the appropriate links below to help solve your issues:

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Has anyone been able to get a repair/proper fix from Apple for their LCD?

    The more I use my Macbook Pro while traveling the more i notice the 'sparkly/grainy' display. Compared to the White/Black Macbook it is obviously noticable what i'm talking about - especially on white backgrounds. My question is - has anyone been able to get a proper repair/fix for this common problem for the Core 2 Duo 15" Macbook Pro's?
    I normally have my Macbook Pro connected to an external display but when i do take it along when I travel it stands out more and more every time.
    Is Apple going to issue a 'recall/repair' for their customers who bought their Macbook Pro's? What am I to do here, When i need to use my laptop when I travel I can't take the annoyance of using this LCD screen.
    C2D 2.16 2GB   Mac OS X (10.4.8)  

    Yes, I can CLEARLY see it, it's like wearing glasses that are filthy. The laptop is one week old and I could see it from after the 802.11n upgrade. This is not all that zoomed, really. To me it looks like a video memory problem, not a LCD problem. The problem is the same if I connect an external DELL monitor. Also very visible there. Also very visible if I change resolutions or number of colours. The main reason I believe it's a video memory thing is that when I move a window, it changes from white to, well... yellow and red. Check out: http://niklas.saers.com/MBP/MG8665.jpg That is why I am unsure if this is the kind of grain you are talking about. Can you confirm that this is the kind of problem you guys are seeing?
    PS, I use a Canon 20D with a 100mm f/2.8 macro lens.

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Has anyone been unable to restore their iPad after attempting to upgrade to ios5? error 1

    Has anyone been unable to restore their iPad after attempting to upgrade to ios5? I get an unknown error 1 message. Thanks.

    I have the same problem. Something happened during the download and froze iTunes. After spending three days searching these forums with the dead iPad, the only thing I got to work was to try downloading iOS 5 using my sons computer. This worked. However I cannot now get my computer's iTunes to sync with my iPad.. It contains the same error message (1602) and has the same problem as before. It is not an antivirus problem. I need some help too

  • Has anyone been able to get a mouse scroll wheel to work with a scrolling text box in authorware?

    Has anyone been able to get a scroll wheel to work with a
    scrolling text box in authorware? Is there any way to attach the
    hardware of a scroll wheel to a scrolling text in a piece? Sure
    would make things easier for the reader.

    I doubt it. Maybe using the WinCtrls.u32? But after a few
    tries years
    ago (before the WinCtrols.u32), I'd pretty much given up.
    Erik
    edwin e wrote:
    > Has anyone been able to get a scroll wheel to work with
    a text box in authorware?
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

  • Has anyone been able to successfully integrate CHARM and BW?

    Has anyone been able to successfully integrate CHARM and BW?
    We are trying to pilot it but cannot find a way of allowing us to control the sequence of importing transports - it's fine for small single transports but we can't see how to control the order of multiple transports or how to re-transport specific indiviual transports.
    Thanks

    You can but you have to install Rosetta from one of your (snow)leopard) disks. It's not a good idea if you don't know what you are doing. But it does work. There are some instructions online if you really want to give it a go. FCS2 is not native intel and Lion is not supporting PPC anymore. So while you can it is questionable if you should. Probably time to up or cross grade.
    Pi

  • Has anyone been able to open Mac OS X 10.6.8 Update Combo v1.1 file?

    Has anyone been able to open Mac OS X 10.6.8 Update Combo v1.1 file?

    fcphantom wrote:
    peterfromfareham,
    No, I have not been able to open it either when downloading right off of Apple's Downloads website.  I keep getting the error
    "The following disk images couldn't be opened"  Image: MacOSXUpdCombo10.6.8.dmg ; Reason: not recognized.
    Apparently people downloading it through Software update are not having a problem, but I need to keep the file so I can run it on multiple computers without having to re-download it.
    Also, the file is only 1.07 GB, not 1.09 GB as advertised.
    I'm experiencing the same situation here. Same error and file size.
    To be accurate, the file is 1.071.015.728 byte and its MD5 hash is c1b40fabb9a8d2b21484546dbe86d446.
    When I download the update at work (Modena, Italy) I keep getting this file, no matter how many times I try to download it, but if I download the update at home (Cento, Italy) the file is bigger and I can mount it without problems.
    I asked two friends to try to get it and one of them from Reggio Emilia (Italy) got the right DMG, the other from Padova (Italy) got the corrupted DMG and the "not recognized" error. We have all different ISP so I can not tell if it's ISP related.
    I may be wrong but couldn't it be that some server in the Apple's CDN has got the corrupted copy of the update and serves it to users requesting the file from some specific locations?
    Anyway, I opened an incident with Apple through Express Lane that has now been escalated.
    I'll report back their findings as soon as they reply to me.

  • Has anyone been able to get a canon mp 780 to scan in lion

    Has anyone been able to get a canon mp 780 to scan in lion. I have tried everything and nothing works.
    Image capture won`t recognize my printer either.

    People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
    Click the Apple menu ( ), and then click System Preferences .
    Click Print & Scan ( ).
    Click Scan , and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
    Change any settings as necessary, and then click Scan .
    The next window looks like this:
    Hope this helps

  • Has anyone been able to export to flash using a Blu-ray Project in CS3?

    Has anyone been able to export to flash using a Blu-ray Project in CS3?
    If so what files, settings and OS were you using?
    Whenever I try to export to flash from a Blu-ray project the program always crashes.

    S&amp;G wrote:
    Eric Root's posting  answered my question. He said to downlaod DiskmakerX. It worked like a charm to create a bootable Mavericks Installer Flash Drive.
    tips on use: https://discussions.apple.com/message/18705466

  • Has anyone been able to retrieve deleted what's app messages

    Hi was trying to see if I can get back deleted messages from what's app, anyone been able to do this? And how? Thanks

    DrumStudio wrote:
    I've posted this before and was recommended to phrase the question like this, has anyone been able to successfully use more than 8 cores with Logic?
    If so or if not please specify what version of logic you have, what computer since only the new Mac Pro's have 16 virtual cores, and any other information or reference saying how to or how its not possible. This seems to be a question many users need to find out before upgrading to a new mac. Thanks!
    No,
    But I've been able to record a quartet using only 4 musicians.

Maybe you are looking for

  • Lost contacts after upgrading to IOS 8.1.2

    Just upgraded to latest IOS on my iphone 4s. To my dismay all my contacts are gone! I am desperate to get them back. My phone was backed up to the cloud, I assume they are retrievable there, however I can't get into my account as it says" your accoun

  • Data Control does not show POJO returned from method

    Hi, I am running JDev 11.1.1.7. In my AppModule.impl I created a method that returns a simple POJO (which implements serializable) that has two String fields. I have exposed the method in the appmodule client interface. In the data control the method

  • Problem with Oracle Client(64 bit) install on Windows 7

    Hi, I am trying to install Oracle Client 64 bit (win64_11gR2_client) on my laptop and its giving me all the pre requisite failed for "Physical Memory, Free Space, Architecture and Enviornment variable: Path". So i need to exit that setup. I have enou

  • Data loading in implementation

    Hi gurus, In implementation-(kindly read the whole thing to understand my doubt) 1.Is client 300 is the only client in BW Development server r else do we have 200,220 as we have in R/3 Developmentserver along with 300. 2. Do we activate all the Infop

  • I create one powerpoint file and the window shows two or three files attached?

    On my Macbook Pro how do I stop my files from combining file in Excel or Powerpoint?