Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?

Hello,
Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
I appreciate any help.

Look in the More Like This box to the right of your post.

Similar Messages

  • Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Then the next step would be a restore as new to rule out corruption in the backup.

  • Anyone else having problems with popups since the new security upgrade? can't get rid of them

    anyone else having problems with popups since the new security upgrade? can't get rid of them

    You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
    For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • Has anyone else had problems scanning to their MacBook Pro from a  Brother MFC device?

    Has anyone else had problems scanning to their MacBook Pro from a Brother device?

    Refer to http://support.apple.com/kb/HT3669. Check if Printer is listed and can function to Print and Scan.
    Check if the computer can detect the Brother Device as a scanner. go to Applications and open up Image Capture. If it is not detected, contact Brother support

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Has anyone been experiencing problems with "Restore Purchases" after upgrading to iOS 7?

    I've been having problems with restoring purchases on a majority of apps that I have previously downloaded and purchased IAPs. I've only successfully restored purchases on one app (Warhammer Quest); but other apps, such as "Legendary Heroes" (On which I spent $20 to unlock everything), no longer restore my purchases. Instead the "Restore Purchases" button prompts me to buy one "Remove ads" purchase. Some apps, such as Trinity Interactive's Tiny Legend Monster Crashers and Call of Mini Zombies do not have a "Restore Purchases" button at all. Has anyone else been having this problem? And even so, is this an issue with iOS 7 or just an incompatibility between the apps themselves and iOS 7? I've put way too much money into a bunch of these apps to have to repurchase everything all over again.

    I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.

  • Does anyone else have problems with the new macbook pro trackpad?

    I exchanged my new macbook pro last week because there was a major trackpad lag. Every time I put it to sleep and woke it up, the trackpad would delay 5 or more seconds. I took it in to the Apple store and they said it could be a software issue and I exchanged it. However, I just opened up this one up from the package today, and there's still a lag. Does anyone else have problems with that? I don't want to exchange it again, so is there something I can do?

    Also, is it mandatory to run software updates when you first turn on your computer?

  • Anyone else having problems with bluetooth on iPhone 6 or is it just me?

    I have an iPhone 6 Plus, 128 GB, iOS 8.1 and the hands free is driving me crazy.
    It does connect to the car bluetooth, but sometimes the call goes to the phone and then comes back to the car, or the call starts on the phone and takes too long to go to the car. Same problem on 2 different cars.
    Also sometimes while on a call a white apple logo comes up to the screen, the call "freezes" and some seconds later the call resumes (the call doesn´t get lost)
    The second situation happened very few times on my previous iPhone 5S, but now is very frequent.
    Any ideas if it is "normal" and I have to wait for a fix or if there is a problem with my phone?
    THANKS!!!

    Hello alejnadro,
    Thank you for using Apple Support Communities.
    The following article provides information on troubleshooting Bluetooth connections. 
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Regards,
    Jeff D. 

  • Anyone having problems with Lion on MacBook Pro 15"?

    I upgraded to Lion through the App Store the day it came out and have had nothing but problems ever since. Snow Leopard was running fine. Lion would cause random application crashes all the time. I had to constantly run Disk Utility to repair permissions and repair the disk. I am currently reinstalling Snow Leopard.

    I'm back!
    Frustrated by multiple install tries and calls to Apple Support, and in a process of elimination, I took my MacBook Pro 15" 5,1 to an Apple Store, and they ran all the hardware diagnostic tests, and found nothing wrong with it.
    So...
    1 - I bought and installed a new battery as mine was starting to bulge a little (it had still passed the test).
    2 - I put the original 4GB RAM back in it.
    3 - I reformatted the internal drive (again).
    4 - I ran the Lion installer and it made it all the way through the process.
    5 - I did not use Migration Assistant... just left a clean Lion install on the MacBook Pro.
    6 - Then I re-installed my 8GB RAM and booted up - it worked fine.
    7 - I then drag-copied all my user files from my Time Machine back-up disk.
    8 - I reinstalled all my application software from original disks and installers (no drag copies from backups).
    Lion running on my MacBook Pro has been stable ever since.
    CONCLUSIONS
    • Lion doesn't like certain third-party RAM that worked fine under Snow Leopard.
    • The Migration Assistant is also worthless in some circumstances.
    • Time Machine is worthless in some circumstances.
    • As a Mac owner, user and customer since 1987, I expected better from Apple in a major software upgrade like this.

  • Is anyone else having problems running out of RAM following an upgrade to Mavericks and Server v3?

    I recently upgraded to Mavericks on my iMac which was also running Server v2.  Following the upgrade to Mavericks I upgraded to Server v3 and have been suffering from constant errors where the computer complains that I have run out of RAM and suspends all applications until I restart the computer.  I cannot work out how to turn off or delete the Server and therefore cannot isolate the problem to OS X or Server.
    Is anybody else experiencing the problem?  I am quite happy to delete the server running on the iMac as I only installed for experimental purposes and only really use it as a caching server at the moment.
    Any help gratefully received.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Has anyone been having issues with their One Max after the Sense 6.0 update? And, if so, what kind of issues?

    Ok, since the Sense 6.0 update, I keep getting one of 2 messages. The first, says that they are having issues activating my phone. The other says that my sim card is already activated.
    My girlfriends One Max, resets her contact ringtones to the default one after each reset.
    I have also heard of other issues ranging from contacts disappearing, to battery drain and wi-fi issues.

    They are almost totally random. They mainly appeared when I was receiving a call. she is just doing a soft reset. When the Sense 6.0 update rolled out, it changed my girlfriends ringtones back to stock instead of the mp3 that she had set.
    My one max  was a much loved device and the first HTC phone i have owned in years. (last was the droid incredible) But, the errors became more and more common, and forced me to edge up into a new phone. (LG g3 as of yesterday)
    As for troubleshooting my one max while i had it. yes, i tried taking the sim card out for 30 seconds, i had the sim card replaced.....I had the phone checked out and nothing was wrong with the phone itself that the techs could find.

  • Has anyone been experiencing problems with the most recent update?

    I have a Ipod Classic 160GB so you all know. Anyways it said today that it needed to be restored which I did that, but then it was unable to sync my music and now everytime I attempt to sync my music I get a message from windows asking if I would like to scan the disk (iPod) which it recommends. When I click on yes scan and fix windows and iTunes freezes and if I ignore the message from windows iTunes freezes anyways. I completely reinstalled iTunes after this originally happened, but the problem continues to persist.

    Lots of people.  I wasted half a day yeasterday working out all the fixes and none of them worked for me.  I just returned hoping that Apple got their act together and figured out the fix.  Right now I can open my itunes or connect my ipod.  I'm starting to get really angry.

  • Has anyone else had problems with the iPhone 4 overheating after an upgrade to iOS7?

    My iPhone has been running hot sinced I upgraded to iOS7.  Today, it rattled through more than 50% of its power while I was sending a text message, became so hot that I couldn't hold it, switched to temperature protection mode and then shut down completely.  It is now blank.

    Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

  • Problems with Smart Wireless Headset Pro after upgrading my Xperia Sola to ICS

    Just want to let the community, and Sony, know that since I "upgraded" my Xperia Sola to ICS, the Text to Speech on my Smart Wireless Headset Pro is not functioning. It used to work just fine when I had Gingerbread on my phone, but when I upgraded to ICS, the Text to Speech voice is not output on the headset, but on the phone, on the call speaker... Hope this bug gets fixed soon.
    Maybe someone already knows of a solution?
    Thanks in advance.

    There is a new update available for the Smart Wireless headset pro, MW1 (0.1.C.0.3).
    Which software version are you running your MW1 on?
    If you don't have the latest I suggest that you use SUS to update your software.
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT201365 ahs anyone had a problem with the passcode to iphone after ios7?

    Has anyone had a problem with the passcode to iphone after ios7?

    This link may help with your passcode issues:
    iOS:  Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US

Maybe you are looking for

  • FDM - scripting variable for reversing the account

    Is there somehow a possibility to tell if the account is intended to be reversed or not (e.g. change the type from revenue to expense). I'm looking for a specific variable that you can use in scripting. I looked through the API guide, but didn't find

  • What do %W% %E% mean in the beginning Java comment?

    I was wondering if anyone knew what the purpose of %W% and %E% at the top of the file comments means. Can't seem to find it anywhere. From the Java Code Conventions document at: 11.1 Java Source File Example The following example shows how to format

  • Loading larger image when dropped

    Hey.  I am working on this image scroller, where thumbnails of images are displayed.  I get each image by function urlLoaded(event:Event):void {      urlLoader.removeEventListener(Event.COMPLETE,urlLoaded);      xml=XML(event.target.data);      xmlLi

  • Problem trackpad under Mountain Lion

    Hi, since I upgraded to Mountain Lion, I'm experiencing problems with the trackpad. Specifically with the 3 finger movement to switch between the screenfilling programs. When my imac goes to slumber and i wake him up, sometimes this movement doesn't

  • Org Mgt-How to assign person for positions in bulk

    Hi Gurus Let any one share how to Assign persons to position in bulk manner i have tried lsmw program but not working properly.using ppom_old it is too difficult to assign for 250 persons.let any one sap hr doctor give me medicine to sort out this is