Has anyone come up with new workarounds for Logic routing bugs?

There have been many threads regarding what seem to be a set of similar bugs. These inlude an audio intrument not sounding after a while, or a channel of automation not being read; and the problem is easily fixed by closing and re-opening the song. That would be a fine workaround except that some songs take a long time to load. I used to have these problems occasionally, but recently they have become so common as to be almost constant. That's bad news, but it also is potentially good news since it means that something in my system has an influence on these bugs. I haven't found a thread in which anyone isolated a factor that helps or hurts, but it's hard to imagine all the keywords for this set of problems, so maybe I missed an idea.
Also a new similar bug has started appearing in my system. When I add a bus send, once in a while either some or all audio channels will go silent, even though the graphic indicators indicate that they should be heard. The silent channels might or might not include the one with the new bus send. Remove the bus send and the sound comes back.
It seems as though changes in routing have binding problems.
Thanks for any ideas!

Absolutely no ideas on workarounds. I have the exact same issues.
Most of the time restarting the computer and session will cure them, but there have been projects where no matter what I do, the faders will not follow the automation data and EXS24 instruments cut out at the same exact time in the arrangement. This occurs even with as few as 6 EXS24 instruments open when on some projects I have up to about 85 open and 30 streaming at the same before I get a CoreAudio error.
Terrible...terrible.
Any word on whether or not 7.2 addresses this issues?

Similar Messages

Has anyone come up with a solution for the WD Passport and Mavericks OSX issues yet?

I was wondering if anyone has come up with a solution for the newer Macbook Pro/Mavericks and external WD Passport not mounting problems?
I have a couple of year old WD Passport that worked fine in my old 2009 Macbook Pro, the problem is the old computer crashed.
My dilemna; My new 2014 Mackbook Pro will not open my WD Passport, called WD Support, their answer, sorry, nothing has been solved.
Is there anyway I can get access to my files on the Passport with any other software, or by using a PC.
I am aware of reformatting the HD, and have read all the forums I could find and have tried installing the WD Update as well, (with the support tech from WD) and nothing works.
I know that my WD Passport works, so please don't suggest checking it, or the cord.
I appreciate all the help anyone can offer, and I am with all the rest of you struggling for solutions.
Thanks so much

Hi everyone, this is what I did
1. upgrade disks to the latest firmware
2. de-install ntfs-3g and MacFuse.
3. Re-install NTFS 3G without Macfuse.
4. Next step: Install OSXFUSE latest version with selection MacFUSE compatibility layer.
5. Last step: Install Fuse Wait
Note: between steps 2 and 5, I restarted my machine.
It worked for me, after about 4 hours.

Has anyone come up with a spreadsheet for investment tracking?

Has anyone engineered a fairly simple spreadsheet for investment tracking?
I'm using the Office 2008 Excel template, but it seems squirrelly/fragile. I don't want to get all my info into it and have it fold on me.
Thanks,
John
MBP, Mavericks

There are hundreds a quick Google search found:
http://office.microsoft.com/en-us/templates/my-financial-portfolio-TC103827362.a spx

Has anyone come across the 'insufficient data for an image' bug in Reader 9.5.1??

We have an application that uses Reader to open scanned documents containing JP2K images and our users are intermittently getting this error however I can only find instances online of this bug from version 9.5.2 up.
Has anyone seen this bug in 9.5.1??
Thanks.

Hi, thanks for getting back to me so quickly. Our application uses scanned images up to 10 years old, and there are thousands of images so we cannot rescan these unfortunately.
I work in a large organisation with it's own desktop team so unfortunately I can't upgrade the version of Reader on our user's machines to see if this resolves either. The desktop team will also not upgrade the version as the problem appears to have only started in 9.5.2.
Does anyone know how I can confirm if the problem was first seen in 9.5.2 or if there were instances in 9.5.1 also?
Thanks again

HAS ANYONE COME UP WITH 5.1 SOUND ON EARY 09 IMAC

OTHER THAN CONNECTING TO A HOME AUDIO SYS. HAS ANYONE COME UP WITH A COMBO OF
AVAILABLE EQUIPMENT TO USE FOR 5.1 SOUND ... THANX ....NEAL702

Neal702,
Please don't type in all caps, it is considered shouting and rude. I'm sure that wasn't your intention, it's just good netiquette.
Anyhow the iMac will put out 5.1 sound assuming that is what you are trying to do. I recommend you find a cable similar to this:
http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-CABLE-TOSLINK/dp/B00006LVF3

Has anyone come up with criteria on who should have an iPad at work?

Has anyone come up with criteria on who should have an iPad at work?

I'm in health care as well...the executives will probably be the first to get them since they are the ones that sign the invoices.....but seriously the iPad has a number of uses in health care...patient education, display of real time clinical data through a vpn connection and in-house apps, desktop virtualization etc. I really believe if you can get the devices in the hands of clinicians, they will think of innovative ways to use them for far more than email, contacts, calendars etc....

TS1702 Has anybody come up with a solution for updating the apps...!!!????

Has anybody come up with a solution for updating the apps ....!!!!????

Yes, I updated all the time.
What's your problem.

HAS ANYONE HAD ISSUES WITH SCREEN CRACKING FOR NO REASON???

HAS ANYONE HAD ISSUES WITH THE SCREEN CRACKING ON ITS OWN???

Good Suggestion Tiki And my suggestion try to keep your Device from getting to Hot, Protect it as well as you can, if your going to Pocket it Make sure it has allot of free space around it..

Has Apple come up with a fix for Parental Controls?

I've browsed around on this forum quite a bit but haven't seen any real fix for the fact that Parental Controls does not work as advertised (come to think of it, it doesn't work at all). Is there a fix??
I'm using a new iMac with 10.5.2 (clean install). PC has never worked, even when we first started using the machine.
I have 3 young kids, each with his own account. All the accounts are set to 30 minute time limits per day. I have customized the Web Content tab to include some sites that are not objectionable but too advanced for my kids.
Today one of my boys was logged in for at least an hour and a half. I check his Today's Activity log. Nothing there! I look at the Web site he's accessing. It's one of the three that I had specifically blocked! They're only in grade school but the kids have figured out that as long as they don't log off they can stay on the computer all day. This happens on all three accounts consistently. Sheesh, Apple, thanks for making me look like a real doofus in front of my kids!
So, is Apple sending out kitchen timers to all of us Leopard users now, so we can at least have a reliable method for controlling our kids' online time?
If there is a REAL fix out there, I'd love to hear about it?
<Edited by Moderator>

Apple doesn't come up with High data usage solutions for cell providers.
It is up to the cell provider.

Has anyone come up with a step by step procedure to upgrade from RH 6 for Word to RH8?

All my projects were made using Word 2003 and RH6 or RH4. We just upgraded to RH8, and I am getting all kind of errors. We followed the advice given in the forum, and deleted all the dot files. It got rid of the DLL message (error 49), but all the text and topics disappeared. The project opens to a blank document.
We still have Word 2003, and do not want to upgrade.
I do need some concrete advice urgently.
Thanks

The procedure does not state to delete ALL copies of the templates, those in Program Files are required.
Did you delete the files from Program Files?
Do you have those templates somewhere you can restore them?
Did you have a copy of the templates in the project?
Do you have a copy of the project from before you upgraded?
See www.grainge.org for RoboHelp and Authoring tips

Has anyone come up with a way to stop Earpods falling out?

Apparently (according to the Ad) these Earpods are actually designed for all ears. Though they sound pretty good, actually comparable to my old Bose IE2 headphones, sadly, they just fall out. One ear is worse than the other but essentially unusable. There must be a way to put them in a silicon cover thing like the Bose. Just hope Apple do as I have read quite a few posts already, to be fair, trade descriptions are being contravened. I’d understand if I had mutated ‘lugholes’ but they really aren’t

I have worked out way of modifying the earpods so they don't fall out. I cut 4-5mm off the big ends of some ear plugs, punched holes in them with a ring-binder paper punch then glued them to the tips of the earpods with loctite 406 (a superglue type of adhesive that works with some plastics). Only use a small amount of the glue though or the ear plugs will soak it up and get too hard to be comfortable. When the glue has set, compress the earplug material as much as possible, then push the earpod ito your ear and hold it in place for 30 seconds or so to let the foam expand, then the earpod won't keep falling out.

Has anyone come up with a solution on why the red circle with question mark inside appears.

Has a solution been brought

Could the problem be that you're trying to make a template that includes assignments and placeholder frames? Because that won't work ... sorry, would be nice if it could.
You will get a missing assignment icon if you move the InDesign file, duplicate it, or rename it via a Save As. That's because assignments are actually attributes of the original file -- they are NOT linked -- and they don't stick with it when the original file is modified (other than normal "Save's"). The time to create assignments is when the live "final" file (even if it's filled with empty frames) has been created for that specific publication/issue, and it will not be moved or renamed during the production cycle.
So if you're doing what I'm guessing ... if you start w/an InDesign file, create assignments and assign empty text frames, and save that as a template ... then you will always end up with "missing" assignments. That's because a template file, when double-clicked, creates an Untitled copy of itself.
"I am getting the missing link for the assignments after they are finished." If an assignment -- an ICMA file, not the linked stories, the ICML files -- shows the red "missing" icons in the assignments panel, the only solution is to recreate them. They are not linked to the layout so there is nothing to relink.
The fix is to select each missign Assignment in the Assignments panel and choose Change Location. It's a bizarre name for the actual function which is to "recreate the Assignment." Be careful of the linked ICML files that go along with that layout (and those assignments).
You will also run into problems if you try to re-use the same linked ICML files for multiple issues. Best to start with a "normal" INDD file, then export Assignments/linked stories for that one issue. When you're done, unlink all the stories and delete the Assignments, turning it back into a normal INDD file. That normal file is safe to duplicate and use as a starting point for the next issue.
AM

I bought an ipod 4g 8gb today from a retail store, its a used one, and the store is indeed an official apple retailer, anyways long story short my ipod home button makes a kinda loud click noise when pressed, has anyone had this with new apple bought ones

I've tested this along side me, my brother's, and my gf's IPhone 4 8GB, as well as my moms IPhone 4s 16GB, and my gf's IPod touch 1&2g 8GB, and all 6 of those seem to have a rather soft press sound.

Yeah I'm starting to think this retailer has been cutting some corners or something. Imagine it's kind of like the key press sound the iPhone makes when typing.
I think I came across a post similar when I google the issue but I think it was from years ago,and out of all the replies only one person said there's was the same.

Has Apple come out with patch for iPhone-Bluetooth connection problem?

I have a Mini Cooper with Bluetooth compatibility and it was compatible with my iPhone for a couple of months, but I have found out that it only syncs up with iPhone software versions of 2.0 or 2.0.1. It seems that when I downloaded tunes on my iPhone from iTunes, it automatically "upgraded" my software on my iPhone to 2.0.2, which now makes it imcompatible with my Mini's bluetooth. Has Apple come out with the patch for this problem yet? I can't believe I'm the only one with this problem. If Apple doesn't advertise the patch for this pretty soon, I'll be blogging for help on this throughout the Internet. I have called Apple....they have put me on eternal hold and still have not given me a positive answer on this dilemma. Apparently the "senior" software guys haven't gotten the word on this coming problem for them. Needless to say my frustration is to the point of chucking this attractive nuisance into the river and going back to a less sophisticated form of communication. Anyone have any information on this? Thanks in advance.

You can send feedback to Apple regarding your issue with the Mini - http://apple.com/feedback . You could also contact Mini and see if they are working on a patch for their bluetooth.
I haven't had the fuzzy picture issue except when my hand shakes while taking a picture. There will never be a perfect update where no one has a problem. If you wait for the perfect update, you'll never update any electronic device.

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

Has anyone come up with new workarounds for Logic routing bugs?

Similar Messages

Maybe you are looking for