Has anyone connect an ant device to an ipad?

Has anyone managed to connect an ipod mini to a garmin ant dongle? I have the lightning to camera cord but the ipad does not support the connection. I have Digifit which support garmin ant but does not connect to the and dongle

The garmin dongle is a USB. Garmin has software for Intel-based Mac OS 10.6.8 or later for ANT agent but the Ipad uses different software. I guess that my question should be, is there a work around for this.
This is what Garmin has to say:
Garmin ANT Agent allows you to transfer fitness data from compatible Garmin ANT devices to and from your computer. Garmin ANT Agent detects any paired Garmin devices in range and automatically downloads fitness data to your computer and transfers the data to Garmin Connect.
This version supports: Receiving history from all Garmin ANT devices
Sending received history to Garmin Connect
Goals in Garmin Connect will automatically be sent to your Forerunner 310XT and Forerunner 405 when receiving history
Sending workouts, courses and user profile to Forerunner 310XT, Forerunner 405 and Forerunner 610 from Training Center
Updating firmware in FR60, Forerunner 310XT, Forerunner 405 and Forerunner 610
Sending goals to Forerunner 310XT and Forerunner 405 from Garmin Connect
Receiving workouts and courses/virtual races from Forerunner 310XT and Forerunner 610
System Requirements: Intel-based Mac
OS 10.6.8 or later
256 MB RAM
150 MB free disk space
USB port

Similar Messages

E5: Ovi Suite has lost connection with your device...

I am trying to update the software on my E5 using OVI suite but I keep getting an error during the install phase (after backup). The following error and instructions are displayed in the OVI suite window but makes no difference when I follow these instructions (just end up back with the same error).
"Nokia Ovi Suite has lost connection with your device. Follow these steps to help reconnect your device:
1. Remove USB cable from your device.
2. Restart the device (turn off and on again).
3. Re-insert the USB cable.
4. Click 'Ok' below to continue updating."
Current E5 software version is 042.007.
I am trying to update to E5 software v. 043.115
Any ideas?

Yep having the same issue. Just got a replacement handset due to the random restarting issue, soon after setting up the new handset I get a message on phone saying software update is available. Both OVI suite and Nokia software updater say version 43.115 is available (about 200mb in size), I currently have the same version as you 42.007. It claims to do a lot of improvements to the handset. The update downloads fine but when it comes to installing I keep getting the same issue. Phone simply will not restart automatically and the update restarts then fails at the same point over and over. Had the same problem with my previous handset.
I spoke with my network provider to see if it was an issue with the handset needing firmware specific to them but they said no it is an issue with the firmware itself and has been happening to everyone since its release!!! They said I should not download it until Nokia has resolved the issues with it. But how do I know when that will happen as I cannot find anything put out by Nokia stating there is an issue or anywhere on web forums saying there is actually a problem.

Has anyone connected a Samsung ML1740 printer to I Mac 10.9.2

Has anyone connected a Samsung ML 1740 printer to an IMac 10.9.2 & if so whar processes / steps were used
Thanks

The S.M.A.R.T. status is "verified"
When I verify the volume, the first error is "invalid leaf count"
Verifying volume “Data Hard Drive”Checking file systemChecking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Invalid leaf record count(It should be 4131310 instead of 4131311)Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.The volume Data Hard Drive could not be verified completely.Error: This disk needs to be repaired. Click Repair Disk.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer downloads it and then says there is a problem at the very end and won't update my iPhone or iPad.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.

How can i connect a usb device (keyboard) into ipad 4

How can i connect a usb device (keyboard) into ipad 4

The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.

Has anyone connected a PXI chassis to an Instron?

I am looking to connect or listen to an Instron (5589) so I can monitor the load and extension from the Instron, and compare it to real time voltage measurements using a 6052E card. Has anyone ever tried this? There appears to be a RS232 port on the Instron DigiLink card, but I've not yet figured out if this is what its for. Any help is very appreciated
~Matt
maat
LV2014

Several years ago I interfaced a PC to an Instron tester through the device's serial port. I don't have the documentation any more on the interface, but as I recall it was a pretty simple protocol.
Have you talked to Instron?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Has anyone Connected a Crystal Report directly to a Microsoft Project file (MPP)?

Post Author: Brian Morris
CA Forum: Data Connectivity and SQL
Iu2019m aware I can save Microsoft Project Files (MPP) to an Access Database, Excel document etc. and there are ways to connect to a Microsoft Project Server.
I wanted to know if anyone has managed to connect directly to one though. Currently we use MPPs to report project status and other deliverables, and itu2019s been an annoyance to have to save the project file then export the data over into a new excel document when ever we have changes (since not all users have project or need all the data in the file).
Preferably, a user should be able to save that project file and anyone that has the Crystal report should be able to run the report against the MPP file. In addition to this, it would be extremely helpful in getting a formalized and nicely formatted report when running reports against rational and MMP files, thus giving an alternative from SODA reports in Microsoft word, which doesnu2019t always work well.
Thanks!

Post Author: Brian Morris
CA Forum: Data Connectivity and SQL
Ok, I answered my own question on the connection issue, but I'm having issues with the predefined fields that enter into the report. The Database Expert shows the correct table names, but when I select them and look at the fields, they are all showing fields that are part of the "Project" table. when I use "Add Command" and use SQL to do a "Select * From TableName" ,where TableName is the name of the respective table, I get the data I'm looking for. Has anyone else run into this error? Is the error on Crystal Reports side or the Data provider's OLE DB driver? Has anyone with a fully patched system encountered the same errors?
Current SetupCrystal Version: 11.0.0.1282CR Professional; Product Type:FullOLE DB Driver: Microsoft Project 10.0 OLE DB Provider
I have pasted my findings below, hopefully other people won't have the same issues I did trying to find this information. if anyone else wants to test and see if they get the same issues I did it would be greatly appreciated.
Connecting a Crystal Report XI to a Microsoft Project File (MPP)
Prerequisites (as I know them)
- Have an installation of Crystal Reports on the machine (a given)
- Have Microsoft Project 2000/2003 installed OR the Microsoft Project OLE DB provider which is installed with Microsoft Project (NOTE: Microsoft 2007 supposedly no longer supports OLE DB and requires an OLAP cube be made or a SOAP connection be used, which I donu2019t deal with personally)
Creating the connection
Start Crystal Reports
Click u201CBlank Reportu201D on the start page
in the u201CDatabase Expertu201D window, under u201CAvailable Data Sourcesu201D, Select u201C+u201D next to u201CCreate New Connectionu201D
Select the u201C+u201D beside u201COLE DB(ADO)u201D
If a u201COLE DB (ADO)u201D window does not come up, double click u201CMake New Connectionu201D
In the u201Cprovider:u201D box Select the u201CMicrosoft Project 10.0 OLE DB Provideru201D
The name may be different depending on the version of project you install and the patch you have on the machine
Select u201CNext >u201D
Under u201CDatabase:u201D copy/paste in the path and project file name
I donu2019t believe the other fields u201CData Source:u201D, u201CUser ID:u201D, or u201CPasswordu201D need to be filled out, and in fact, I got an error when entering in data into them
Example: u201CC:\Projects\Project Name\Current Schedule.mppu201D
Select u201CNext >u201D
In the Advaned information window, verify the project Name is the path of the project.
I have not found the use of u201CEnterprise Modeu201D (default: 0), u201CAlways Loadu201D (default: 0), u201COLE DB Servicesu201D(default: -5), or u201CEnterprise RUID Listu201D (default: blank), removing them or changing them did cause errors though.
Click u201CFinishu201D
Adding in Tables and extracting data
You now have a connection to the project File you listed. There is an issue Iu2019ve found though that all the tables you see listed are filling their fields in from the u201CProjectu201D Table, rather then their respective tables (Example: u201CAssignmentsu201D is pointing at u201CProjectu201D rather then the obvious connection u201CAssignmentsu201D). You can, however, use the u201CAdd Commandu201D and select the table you want with just a little SQL code:
Select *
From Assignments
After creating the command, highlight it and hit u201CF2u201D. You should be able to edit the name and change it from u201CCommandu201D to something more meaningful. At the current time Iu2019m unsure if the issue with the default tables all pointing toward the project table is an error on the provider side or Crystal Reports end, and if one of the new patches will fix it. I will update this document accordingly when I have more information and do more testing. I will note however, there is no way to change which table these preset fields point to.
Thank you for your time.

Has anyone used a USB device server with a DAQmx or NI-VISA USB device?

Hi,
I have an application where I need to communicate with USB devices (some through DAQmx, others through NI-VISA) that will be more than 15 feet away from the controlling PC. I could use USB-ethernet-USB dongles, but I also see that there are USB-over-ethernet device servers available (like this one: http://www.usbgear.com/computer_cable_details.cfm?sku=USBNET-400&cats=104&catid=187%2C188%2C104%2C65...). Has anyone used these or similar USB device servers successfully with LabVIEW?
Thanks,
JasonP

http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/td-p/381873
http://forums.ni.com/t5/Dynamic-Signal-Acquisition/Using-a-quot-USB-2-0-extender-over-Cat-5-quot-to-...
http://forums.ni.com/t5/Multifunction-DAQ/Can-I-use-a-USB-Extender-with-USB-6008-or-cDAQ/td-p/920361
Let me know if you have any more questions.
Product Support Engineer
National Instruments

Don't Laugh! Has anyone connected a 7.3.4 client to a 9iR2 64 bit database

I know everyone is probably scratching their heads, but has anyone every connected to a 9iR2 64 bit database using a V7 OCI drivers to connect to the database? The V7 OCI works fine with 8.1.7.4.

Can you detail it a little bit more?
You do have a 8174 installation and are you using
just the listener? Is it that all?
Have I missed something?
Sort of. The 9207 database is running on a HP-UX cluster that is used to host many databases, some of which are 8174, some of which are 9207. So, luckily, 8174 is already installed so it was as simple as creating a new listener in this home for the 9207 database.
Crude but effective.

Has anyone connected to iFS from Perl or PHP

Hi,
I am evaluating iFS and we currently connect to Oracle 8i
through Perl and PHP. Is Java the only way to connect to iFS or
has anyone been able to do it through other scripting languages
such as Perl or PHP? Any help would be greatly appreciated,
thank you.

Regarding PHP you may consider using the PHP-build in java
wrapper (--with-java). However, your code will be significant
harder to read, while basically doing the same than native java
code. It makes no sesnse to rewrite the ifs-java-API itself, as
it is good and complete (in contrast to the webui).
Best regards

Has anyone connected Lookout to Motorola RTU's via Motorola MCP-T gateway

I am looking for a driver to connect Lookout to Motorola's MCP-T Gateway for communication with Motorola RTU's via radio. Has anyone seen a driver or developed such a driver?

I'm very familiar with most of the Motorola equipment, but why have I never heard of a MCP-T Gateway. I've done a bunch of systems and am working on one as we speak with MOSCAD RTU's. I'm having Lookout talk Modbus to a FIU and the FIU is gathering data from the field talking MDLC over the air.
Oliver Scheurer
Aegis Solutions, Inc.
Phone: (919) 861-0103 Ext. 231
[email protected]

NI PXIe-1620Q - has anyone had success writing device drivers for Fedora 15? I am trying to control a PXI-6509.

I am using Fedora-Core 15 with kernel, 2.6.43.8_1.fc15.i686. I am trying to use NI-KAL ver 2.1 which does not support my version. But it compiles, the nikal driver loads correctly. But after a rebboot it crashes.
Has anyone built any version of NI-KAL that will work with FC15? or via the DDK?

Hi p_borras,
Is there a specific error associated with the crash you are experiencing?
Thanks,
Daniel D.
National Instruments
Automated Test Software R&D

QUESTION - Has anyone else recently experienced an iPhone or iPad's alarm going off by itself, without being set by the user?

Has anyone else had his/her phone alarm (on the clock app) go off by itself, without being set, and with a very weird sound?
Happened to me at 11:34 pm last night (Oct 28, 2013). I'm using an iPhone 5 with iOS 6. Sound was named something like "Orari" and sounded like a woo-woo ghostly alarm. I immediately swiped to stop the alarm and then deleted the alarm, which I had NOT set, but which seems to have set itself. The iPhone was plugged into my iMac at the time. There is no such sound on my phone or, it seems, anywhere (I Googled).
The night before, Oct 27, something similar happened to my iPad mini running iOS 6 ... also plugged in to recharge, but at a wall socket ... the sound was like a fire or smoke alarm.
I know it's Halloween week, but some of us need our sleep!
Any explanations?

Hi Littleleslie,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes up, double tap the Home key and make sure you don't see the Alarm app in the list of background apps. If you do, swipe up on the thumbnail for it to close it out completely.
Then all you can do is wait to see if it will let you sleep through the night!
Good luck!
Cheers,
GB

Has anyone experienced a blue screen while the ipad appearently still works in thbackground?

has anyone ever had a blue screen iPad issue repaired and if so what was the price?

Have you tried to give your iPad a reset? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting.
If the reset doesn't help you can try a restore. If that doesn't help then if your device is under warranty and it's deemed to be a manufacturer's defect they should replace it for free. If it's not under warranty then the out of warranty replacement cost starts at 219 for a mini, 249 for a 2 and 299 for iPad 3+ (and more depending on the model)
You'd need to make an appointment at your local apple store if you go for the replacement.

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

Has anyone connect an ant device to an ipad?

Similar Messages

Maybe you are looking for