Has anyone connected AE to a HP Photosmart C3150?

Trying to find a printer that will fit in a small space and connect with Airport Express. Interested in HP Photosmart D5360, C3150, D7145, C4180 or Canon PIXMA MP970. Have gone to ifelix and checked list, none of these on list but maybe one of you has experience with one of the above. Thanks for the help.

HP Photosmart C4280 works rught out of the box with AE and is under $100.

Similar Messages

Has anyone connected a Samsung ML1740 printer to I Mac 10.9.2

Has anyone connected a Samsung ML 1740 printer to an IMac 10.9.2 & if so whar processes / steps were used
Thanks

The S.M.A.R.T. status is "verified"
When I verify the volume, the first error is "invalid leaf count"
Verifying volume “Data Hard Drive”Checking file systemChecking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Invalid leaf record count(It should be 4131310 instead of 4131311)Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.The volume Data Hard Drive could not be verified completely.Error: This disk needs to be repaired. Click Repair Disk.

Has anyone Connected a Crystal Report directly to a Microsoft Project file (MPP)?

Post Author: Brian Morris
CA Forum: Data Connectivity and SQL
Iu2019m aware I can save Microsoft Project Files (MPP) to an Access Database, Excel document etc. and there are ways to connect to a Microsoft Project Server.
I wanted to know if anyone has managed to connect directly to one though. Currently we use MPPs to report project status and other deliverables, and itu2019s been an annoyance to have to save the project file then export the data over into a new excel document when ever we have changes (since not all users have project or need all the data in the file).
Preferably, a user should be able to save that project file and anyone that has the Crystal report should be able to run the report against the MPP file. In addition to this, it would be extremely helpful in getting a formalized and nicely formatted report when running reports against rational and MMP files, thus giving an alternative from SODA reports in Microsoft word, which doesnu2019t always work well.
Thanks!

Post Author: Brian Morris
CA Forum: Data Connectivity and SQL
Ok, I answered my own question on the connection issue, but I'm having issues with the predefined fields that enter into the report. The Database Expert shows the correct table names, but when I select them and look at the fields, they are all showing fields that are part of the "Project" table. when I use "Add Command" and use SQL to do a "Select * From TableName" ,where TableName is the name of the respective table, I get the data I'm looking for. Has anyone else run into this error? Is the error on Crystal Reports side or the Data provider's OLE DB driver? Has anyone with a fully patched system encountered the same errors?
Current SetupCrystal Version: 11.0.0.1282CR Professional; Product Type:FullOLE DB Driver: Microsoft Project 10.0 OLE DB Provider
I have pasted my findings below, hopefully other people won't have the same issues I did trying to find this information. if anyone else wants to test and see if they get the same issues I did it would be greatly appreciated.
Connecting a Crystal Report XI to a Microsoft Project File (MPP)
Prerequisites (as I know them)
- Have an installation of Crystal Reports on the machine (a given)
- Have Microsoft Project 2000/2003 installed OR the Microsoft Project OLE DB provider which is installed with Microsoft Project (NOTE: Microsoft 2007 supposedly no longer supports OLE DB and requires an OLAP cube be made or a SOAP connection be used, which I donu2019t deal with personally)
Creating the connection
Start Crystal Reports
Click u201CBlank Reportu201D on the start page
in the u201CDatabase Expertu201D window, under u201CAvailable Data Sourcesu201D, Select u201C+u201D next to u201CCreate New Connectionu201D
Select the u201C+u201D beside u201COLE DB(ADO)u201D
If a u201COLE DB (ADO)u201D window does not come up, double click u201CMake New Connectionu201D
In the u201Cprovider:u201D box Select the u201CMicrosoft Project 10.0 OLE DB Provideru201D
The name may be different depending on the version of project you install and the patch you have on the machine
Select u201CNext >u201D
Under u201CDatabase:u201D copy/paste in the path and project file name
I donu2019t believe the other fields u201CData Source:u201D, u201CUser ID:u201D, or u201CPasswordu201D need to be filled out, and in fact, I got an error when entering in data into them
Example: u201CC:\Projects\Project Name\Current Schedule.mppu201D
Select u201CNext >u201D
In the Advaned information window, verify the project Name is the path of the project.
I have not found the use of u201CEnterprise Modeu201D (default: 0), u201CAlways Loadu201D (default: 0), u201COLE DB Servicesu201D(default: -5), or u201CEnterprise RUID Listu201D (default: blank), removing them or changing them did cause errors though.
Click u201CFinishu201D
Adding in Tables and extracting data
You now have a connection to the project File you listed. There is an issue Iu2019ve found though that all the tables you see listed are filling their fields in from the u201CProjectu201D Table, rather then their respective tables (Example: u201CAssignmentsu201D is pointing at u201CProjectu201D rather then the obvious connection u201CAssignmentsu201D). You can, however, use the u201CAdd Commandu201D and select the table you want with just a little SQL code:
Select *
From Assignments
After creating the command, highlight it and hit u201CF2u201D. You should be able to edit the name and change it from u201CCommandu201D to something more meaningful. At the current time Iu2019m unsure if the issue with the default tables all pointing toward the project table is an error on the provider side or Crystal Reports end, and if one of the new patches will fix it. I will update this document accordingly when I have more information and do more testing. I will note however, there is no way to change which table these preset fields point to.
Thank you for your time.

Has anyone connected a PXI chassis to an Instron?

I am looking to connect or listen to an Instron (5589) so I can monitor the load and extension from the Instron, and compare it to real time voltage measurements using a 6052E card. Has anyone ever tried this? There appears to be a RS232 port on the Instron DigiLink card, but I've not yet figured out if this is what its for. Any help is very appreciated
~Matt
maat
LV2014

Several years ago I interfaced a PC to an Instron tester through the device's serial port. I don't have the documentation any more on the interface, but as I recall it was a pretty simple protocol.
Have you talked to Instron?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Don't Laugh! Has anyone connected a 7.3.4 client to a 9iR2 64 bit database

I know everyone is probably scratching their heads, but has anyone every connected to a 9iR2 64 bit database using a V7 OCI drivers to connect to the database? The V7 OCI works fine with 8.1.7.4.

Can you detail it a little bit more?
You do have a 8174 installation and are you using
just the listener? Is it that all?
Have I missed something?
Sort of. The 9207 database is running on a HP-UX cluster that is used to host many databases, some of which are 8174, some of which are 9207. So, luckily, 8174 is already installed so it was as simple as creating a new listener in this home for the 9207 database.
Crude but effective.

Has anyone connected to iFS from Perl or PHP

Hi,
I am evaluating iFS and we currently connect to Oracle 8i
through Perl and PHP. Is Java the only way to connect to iFS or
has anyone been able to do it through other scripting languages
such as Perl or PHP? Any help would be greatly appreciated,
thank you.

Regarding PHP you may consider using the PHP-build in java
wrapper (--with-java). However, your code will be significant
harder to read, while basically doing the same than native java
code. It makes no sesnse to rewrite the ifs-java-API itself, as
it is good and complete (in contrast to the webui).
Best regards

Has anyone connect an ant device to an ipad?

Has anyone managed to connect an ipod mini to a garmin ant dongle? I have the lightning to camera cord but the ipad does not support the connection. I have Digifit which support garmin ant but does not connect to the and dongle

The garmin dongle is a USB. Garmin has software for Intel-based Mac OS 10.6.8 or later for ANT agent but the Ipad uses different software. I guess that my question should be, is there a work around for this.
This is what Garmin has to say:
Garmin ANT Agent allows you to transfer fitness data from compatible Garmin ANT devices to and from your computer. Garmin ANT Agent detects any paired Garmin devices in range and automatically downloads fitness data to your computer and transfers the data to Garmin Connect.
This version supports: Receiving history from all Garmin ANT devices
Sending received history to Garmin Connect
Goals in Garmin Connect will automatically be sent to your Forerunner 310XT and Forerunner 405 when receiving history
Sending workouts, courses and user profile to Forerunner 310XT, Forerunner 405 and Forerunner 610 from Training Center
Updating firmware in FR60, Forerunner 310XT, Forerunner 405 and Forerunner 610
Sending goals to Forerunner 310XT and Forerunner 405 from Garmin Connect
Receiving workouts and courses/virtual races from Forerunner 310XT and Forerunner 610
System Requirements: Intel-based Mac
OS 10.6.8 or later
256 MB RAM
150 MB free disk space
USB port

Has anyone connected Lookout to Motorola RTU's via Motorola MCP-T gateway

I am looking for a driver to connect Lookout to Motorola's MCP-T Gateway for communication with Motorola RTU's via radio. Has anyone seen a driver or developed such a driver?

I'm very familiar with most of the Motorola equipment, but why have I never heard of a MCP-T Gateway. I've done a bunch of systems and am working on one as we speak with MOSCAD RTU's. I'm having Lookout talk Modbus to a FIU and the FIU is gathering data from the field talking MDLC over the air.
Oliver Scheurer
Aegis Solutions, Inc.
Phone: (919) 861-0103 Ext. 231
[email protected]

Has anyone connected a scanner to the AirPort Express unit?

I have an AirPort express wireless unit right now running as a range extender. I have not connected a printer to it yet and I was wondering if the unit only allows printers or would a scanner or other similar USB device also work?
I am more curious right now, and simply wondering if anyone has been successful connecting a non-printer to that port.
Dual G5 and MacBookPro Mac OS X (10.4.6)

thanks to both of you for the info but I am a stubborn guy:)
That article does not exclude scanners in the list of devices that don't work.
A scanner is "close" to a printer. Certainly closer than a disk drive, and as Spok says, "There are always possibilities."
I was told that the AirPort Express device would not work with my LinkSys SRX200 and it works fine as a range extender.
I will first connect a printer to the USB port just to get my feet wet and after I get that working I will unplug it and connect my scanner to it and see what happens. The very worst thing would be that the world comes to an end.
Anyway, I will report back what happens. Certainly something should happen such as an error message or a driver error or some such thing or it might work.
Being a born hacker, telling me it won't work is music to my ears.
OK, maybe it won't work. But so far, nobody has told me why.
I will return
Dual G5 and MacBookPro Mac OS X (10.4.6)

Has anyone connected the Sony HD700 deck to FC6 to import HD video?

Hi,
I recently decided to make the jump to HD, so I needed to get a new deck as my old Panasonic one is only SD. I'm shooting HD on the Canon XHA1 and now I'm trying to connect the new Sony deck into Final Cut but Final Cut won't recognize it. I did a test with the deck set to SD using an SD tape and a SD preset in Final Cut, and that worked fine. I guess I'm doing something wrong with my HD settings. Any advice? Do I need an HD firewire cable or something like that? The HD tape will play in the deck and show up on its little screen, but Final Cut will not recognize the device control. Help! Thanks...

Hmm, I'll have to try that, I've never actually used the "Print to Tape" option before. To do a quick layout to a VHS I just kept my HD project open, created a new SD project, copied all the clips from the HD timeline over into the new SD timeline, switched my deck back to SD, and then just hit play on the SD timeline and ran it through firewire through my deck and into the VCR. Obviously not the optimal quality solution, but it got the footage onto a tape for my client.
This whole switch to HD is so much more complicated than I thought! I mean, I guess not really super complicated if I would have done ALL the research at once, but so many more gadgets to buy than just getting the HD camera. Anyway, thanks again for your help...
-Sarah

Has anyone connected the console on a Sun M4000 to a HP Comware 5830-96G switch

We have a Sun M4000 connected to an older HP switch, and it works fine. When we move the connection to the new HP Comware 5830-96G it will not work. The switch shows the interface up, autoneg to 100mb full duplex, but no mac address. Other servers like the T2000 and V215s all connect properly.

Hi,
seems the connection parameters as you indicated are ok.
You can use the serial console connection to verify that networking is still enabled
>shownetwork
and you can check
>showlogs monitor
for errors, if any.
Just to confirm, did you use the correct port on the xscf?
Re
Martin

Has anyone connected Contribute 3 to iWeb?

I keep getting my old, non-existent homepage. How do you connect to iWeb using the Contribute connect wizard?
Thanks Ed

I am considering buying contribute so that a
congregation could update their web pages without my
input. Are you saying it does not work with iweb?
I think I will wait on answers before I shell out 150
bucks for something that may not work.
You should never buy it without testing the free trial:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=contribute3

Has anyone tried connecting 2 printers to TC?

Last night, I tried adding a second printer (both printers are HP's, a Photosmart 1215 and a Photosmart 370) connected through a USB hub, of course. However, the TC didn't couldn't see either printer. Then I unplugged the hub and plugged the 1215 back directly into the TC and it all worked perfectly and I could print remotely.
So has anyone connect more than 1 printers to a TC (or AEBS)?

I have: Eastman Kodak printer dock and Hewlett-Packard LaserJet 1020
Neither are officially MAC supported printers, and both work no problem on the TC !
(using a USB 1.1 hub, non-powered)
Note that it did take several reboots of the TC and about half an our before the USB printers were detected and shown on the TC Bonjour page, so be patient.

Has anyone been able to plug in a backlit keyboard to the ThinkPad OneLink Pro Dock (4X10E52935)?

I use the logitech iluminated keyboard K740 and it claims not to support being plugged into to docking stations.
Has anyone succesfully connected the k740 to the OneLink Pro Dock?
Or alternatively, has anyone connected any other illuminated keyboard to the OneLink Pro Dock?
Solved!
Go to Solution.

In case anyone else has this question - we have a few OneLink Pro docks, with X1 Carbon G2s. Works generally well. We are having an intermittant issue though that may be related, and is what brings me to the boards today. We are getting USB devices being unable to be used due to "USB Hub Power Exceeded" errors, which leads up having to plug the offending device into the laptop directly, until a reboot or misc repluggings fixes it. It tends to be the keyboard having this issue - K740 and Bloomberg Keyboard 4 (the new black one). Haven't found a satisfactory fix yet.

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

Has anyone connected AE to a HP Photosmart C3150?

Similar Messages

Maybe you are looking for