Has anyone connected the console on a Sun M4000 to a  HP Comware 5830-96G switch

We have a Sun M4000 connected to an older HP switch, and it works fine.  When we move the connection to the new HP Comware 5830-96G it will not work.  The switch shows the interface up, autoneg to 100mb full duplex, but no mac address.  Other servers like the T2000 and V215s all connect properly.

Hi,
seems the connection parameters as you indicated are ok.
You can use the serial console connection to verify that networking is still enabled
>shownetwork
and you can check
>showlogs monitor
for errors, if any.
Just to confirm, did you use the correct port on the xscf?
Re
Martin

Similar Messages

  • Has anyone connected the Sony HD700 deck to FC6 to import HD video?

    Hi,
    I recently decided to make the jump to HD, so I needed to get a new deck as my old Panasonic one is only SD. I'm shooting HD on the Canon XHA1 and now I'm trying to connect the new Sony deck into Final Cut but Final Cut won't recognize it. I did a test with the deck set to SD using an SD tape and a SD preset in Final Cut, and that worked fine. I guess I'm doing something wrong with my HD settings. Any advice? Do I need an HD firewire cable or something like that? The HD tape will play in the deck and show up on its little screen, but Final Cut will not recognize the device control. Help! Thanks...

    Hmm, I'll have to try that, I've never actually used the "Print to Tape" option before. To do a quick layout to a VHS I just kept my HD project open, created a new SD project, copied all the clips from the HD timeline over into the new SD timeline, switched my deck back to SD, and then just hit play on the SD timeline and ran it through firewire through my deck and into the VCR. Obviously not the optimal quality solution, but it got the footage onto a tape for my client.
    This whole switch to HD is so much more complicated than I thought! I mean, I guess not really super complicated if I would have done ALL the research at once, but so many more gadgets to buy than just getting the HD camera. Anyway, thanks again for your help...
    -Sarah

  • Has anyone gotten the Digi 002 to work on Mavericks?

    Has anyone gotten the Digi 002 rack to work on OSX Mavericks?
    I know it says '002 rack and console are not supported (untested)' according to Avid's site, but I was curious if anyone has got it to run.
    I am currently using Logic Pro 9 with it right now under OSX 10.8.5, but would like to upgrade my OS. (Logic Pro X is out until I can find a reliable 32 bit bridge for all of my plugs.)
    Thnaks in advance.

    the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
    heere is the note they sent - but some of the urls dont resolve
    Jaff said:
    If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
    http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
    Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
    http://www.whatismyip.com/
    Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
    http://portforward.com/english/applications/port_forwarding/Splasht...

  • Has anyone put the RAR Background Job Spool on a different server?

    We are on GRC 5.3 SP 13.
    Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
    I currently have it assigned to a folder on the GRC server, but it is running out of space.  I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls.  They are also resisting downloading the reports (more work for them).  I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
    I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded.  I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
    Has anyone done this, and did you run into any problems?
    Thanks.

    Hello Bob,
    I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
    If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
    - Specific user to connect to FileServer
    - Availability of the FileServer. If the FS is down, the RAR job will cancel.
    - Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure,   because it depends on a lot of things like network speed, server load, etc.
    Maybe someone has already implemented it and gives you more hints.
    Cheers,
    Diego.

  • My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

    My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
    Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

    If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
    Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

  • Has anyone experience the "cricket" sound on an iMac pro ?

    Has anyone experienced the "cricket" sound that seems to come when connected to the internet?  It is disquieting ....

    Thanks a ton for your quick response, Todd...
    I do have the playback resolution set at 1/8th and the paused resolution set at 1/4, and the footage seems to handle just fine. I don't know the specifics of the computers, but I did notice that they had only 4GB ram, a single HD, and they don't have a GPU enabled graphics card installed.
    I played around a bit with some of the footage on one a little while ago and it seems to play pretty smoothly (though certainly not as good as my editing system in my office!)
    I don't think I've got any further questions, but if I do I'll be sure to let you know.

  • Has anyone connected a Samsung ML1740 printer to I Mac 10.9.2

    Has anyone connected a Samsung ML 1740 printer to an IMac 10.9.2 & if so whar processes / steps were used
    Thanks

    The S.M.A.R.T. status is "verified"
    When I verify the volume, the first error is "invalid leaf count"
    Verifying volume “Data Hard Drive”Checking file systemChecking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Invalid leaf record count(It should be 4131310 instead of 4131311)Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.The volume Data Hard Drive could not be verified completely.Error: This disk needs to be repaired. Click Repair Disk.

  • Has anyone used the Nokia 2700 as a modem with the Macbook 10.6.7

    I have managed to sync my Nokia 2700 classic GSM handset to my Macbook through iSync. How can I use the phone as a modem if I have a 3G mobile service?
    Many thanks in advance,
    Dileep

    louisfromleonia wrote:
    Has anyone used the macbook air superdrive connected to a macbook pro - with a source DVD,via usb as a destination drive for burning DVDs?
    I don't use the Apple SuperDrive but an LG GP08NU6W. works great! You can get one here:
    http://www.amazon.com/LG-Electronics-GP08NU6W-External-Drive/dp/B003D1DESS
    I got the white one.

  • Has anyone used the mackeeper software?

    Has anyone used the mackeeper software?

    Short answer:  I don't recommend it, but it's not "a scam" or malware, per se.  If you use it, you may have some real performance issues.
    Me:  I was an actual MacKeeper user (paid version) for about two years.  What follows is my experience and conclusions.  I am not a paid reviewer, nor tech professional.  I am an educator with about 15 years of experience using Macs.  I am what most people would call a "prosumer," in that I know a good deal about my systerm, but am not a techie, anti-utility software zealot, etc.  I have no affiliation with Zeobit (manufacturer of MacKeeper) nor any of its competitors.
    I bought MacKeeper in 2011, and then upgraded last year.  I used it to remove junk files and duplicates, and experimented with the anti-virus software.  I didn't use most of the other features.
    The problem:  I am running a 2009 15" Macbook Pro 2.8GHZ Core 2 Duo, 4GB RAM, 512GB HDD.  Over the past year, it has been having major performance issues.  Slowdowns, hangups, applications quitting and more were all becoming the norm.  I deleted duplicate files and ran MacKeeper a few times a month.  I also ran permissions repairs regularly (disk utility).  I looked for the cause of the slowdowns everywhere, from too many user accounts being open, to resource hogs.  I decided that MacKeeper's Anti-Virus software was just taking up too much RAM and CPU, so I disabled it.  I continued experiencing slowdowns and started monitoring my available RAM with a freeware app called Memory Clean.  It often reported that I had less than 500MB available, even with very light usage, application wise.  After "cleaning" memory, I could get my available RAM to about 1.5GB, max.  I struggled with these issues for a year or more, and was about ready to concede defeat and buy a new machine.  I figured my MBP was over four years old, and perhaps running Mountain Lion and normal wear/tear were just too much.
    This morning, I noticed that the biggest resource hog on my system was a process called "MacKeeper Helper." The process relaunches even when it is forced to quit.  It was consuming over 100MB of RAM and up to 99 percent of my CPU at times!  I also noticed a process called "anti-virus" that also could not be quit, and was consuming over 100MB of RAM itself.  I started researching how to kill these processes, and was introduced the the Great Online MacKeeper Controversy.  Here is what I learned:
    Some in the Mac community have pure hatred for this product (and some hate all like it).
    There were numerous user reports of it slowing down systems
    Zeobit seemed to be guilty of questionable ethics, particularly in its advertising.
    There was no way to stop MacKeeper Helper and Anti-Virus processes from running with deleting the entire application.
    I wasn't the only one annoyed by MacKeeper's system pop-ups, trying to sell me something I already bought.
    The software got good professional reviews, even from well-respected publications (e.g. MacWorld)
    It is often confused with Mac Defender, which WAS malware.  They two are not associated.
    The Decision:  After researching ways of fully uninstalling MacKeeper (and considering whether or not I should), I decided to try the uninstall instructions from the manufacturer.  It said that it would remove ALL traces of the application.  I also didn't want to get into too much Terminal work and manually deleting things, as some users suggested doing.  I followed the process (close app, drag to trash, enter password, click "uninstall").  I then ran a permissions repair and restarted.
    The Results:  I have been MacKeeper-free for about an hour as I write this. Put simply, my problems appear to be completely solved. MacKeeper Helper and Anti-Virus are gone.  Available RAM is now up to 2.75GB.  I have experienced no slowdowns or app crashes.  Even bootup appeared to be considerably faster.  Launching iPhoto with thousands of images now takes a few seconds instead of minutes.  Everything feels faster.  It's like I have my Mac back!  I was ready to admit defeat and dish out another $2500+ that I didn't have.  I now think that won't be necessary!
    What Should Yo Do? You'll find a lot of controversy out there between professional reviews, ethically dubious paid reviews, Zeobit's own defense through public statements, and Mac users themselves.  Some users like it, and swear up and down they are real people.  Others are extremely angry and hate the product with the passion of 1,000 burning suns.   All I can do is tell you my experience and make the following statement:
    The bottom line is that I would not install MacKeeper/buy MacKeeper on my Mac.  After investigating my own system's problems (which made iit nearly unusable) and concluding that MacKeeper might be the issue, I uninstalled it. Magically, all my issues went away.  So...I report, you decide.  Best of luck.

  • Has anyone used the ATTO ExpressSAS R644 in a Mac Pro?

    Any thoughts on your experience if so?

    louisfromleonia wrote:
    Has anyone used the macbook air superdrive connected to a macbook pro - with a source DVD,via usb as a destination drive for burning DVDs?
    I don't use the Apple SuperDrive but an LG GP08NU6W. works great! You can get one here:
    http://www.amazon.com/LG-Electronics-GP08NU6W-External-Drive/dp/B003D1DESS
    I got the white one.

  • Has anyone with the ECPD Profile error been able to order successfully yet?

    Has anyone with the ECPD Profile error been able to order successfully yet?

    If the error is in fact due to the employee discount Verizon dropped the ball here big time. I never was able to get past the ECPD error when upgrading my device tried for90minutes. I did the new customer and it went through without a hitch but i would have to change my phone number....not good!! Decided to give it one last shot on Apple Store App and was able to have the iPhone 6 Plus silver 16GB reserved...got a reservation number since they were having issues connecting to verizon. So happy!! Been month to month over 2 years waiting on the 6!!! If you don't care to change your number go as a new customer or use apple store app. Good luck and good night!
    Verizon this is no way to treat your existing customers!!

  • I cannot log into my Facetime or iMessages. When I bought this iPad2 in November everything worked. This is extremely frustrating. Has anyone found the solution?

    I cannot log into my Facetime or iMessages. When I bought this iPad2 in November everything worked. This is extremely frustrating. Has anyone found the solution?  

    I can still access the internet. I can still log into my iCloud. I reset my network settings and restored my iPad twice already. I tried all the stuff I could find on YouTube to include changing my DNS setting to 8.8.8.8 I don’t know why I can’t log on. I bought the iPad in Germany and it worked. When I came back to Turkey where I live it worked. I took a trip to the states in December and it worked. Now that I’m back in Turkey, I can’t even log on. For both the facetime and imessage I get a message that says “ Could not sign in. Please check your network connection and try again. I tried to all the help line twice and they couldn’t even help me. I just bought this in November and don’t know why it’s not working……….Help if you can. Thanks for the response.

  • Hello,  I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it.  Has anyone got the same file? Or know where it may originate from?  Thanks in advance!

    Hello,
    I have a strange file in my Users folder, named PortDetect.log
    I have no idea which app created it and it reappears when I delete it.
    Has anyone got the same file? Or know where it may originate from?
    Thanks in advance!

    know where it may originate from?
    The Huawei wireless modem driver.

  • My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    To help avoid future transgressions set the Restrictions for In-App Purchases...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213

  • Has anyone got the QT stand alone installer to work?

    OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
    You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
    and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
    Mark

    I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

Maybe you are looking for