Has anyone created an animated loading image for a WebApp?

I have a complex WebApp that takes a few seconds to load. Does anyone have an example of a loading image for WebApps?

Lots of choice
Google

Similar Messages

Has anyone created a NI-VXI driver for the Ardence RTX operating system?

Has anyone created a NI-VXI driver for the Ardence RTX operating system?
a VXI instrument through a PCI-VXI-8335 card (in the PC) talking to a PCI-VXI-8345 card (in the VXI chassis) via MXI-3, Has anyone created a PCI-VXI-8335 card driver for the Ardence RTX operating system?

Now i want develop driver on RTX,my hard platform is similiar(PCI8335+VXI8340+1418A),and after i read the PCI baseaddress,i find PCI8335 only has memory-map,so that means if i want to driver this board ,so i take following steps list below:
1.use Rtmapmemory() to map the baseaddress to virtual address
2.using memset() or memcpy() to driver the 1418A board
is this right?
if you can give me some hints,thanks
or you can contact me :[email protected]

Has anyone created a golden ratio plugin for aperture?

Hey there,
Just wondering if anyone knew of an overlay plugin or some other easy method to check the golden ratio against photos within the aperture library. Not that its mission critical to have it within aperture, it's just a pain to export from aperture into another program and back again.

Thanks for the suggestion Thomas but I'm looking for a little more functionality than that. I'd actually like to see a opaque/translucent overlay (just like the guides that already exist in the crop function) that reflects the golden ratio. http://www.digital-photography-school.com/divine-composition-with-fibonaccis-rat io-the-rule-of-thirds-on-steroids I suppose this is something most photographers can eye but I'd like to have the guide there to better understand it.

Has anyone develped an EM plug-in for Cisco switches or routers

Folks,
Has anyone develped an EM plug-in for Cisco switches or routers? Please reply to this thread if you have developed one and would like to share your experience in developing this plug-in?
Thanks,

It's probably not the conversion from CMYK to RGB that's causing the problem, but color profile (ICC) embedding in Photoshop. Fireworks doesn't read color profiles. You might be able to create an action to remove the color profile in Photoshop and then batch process the images with it.

Mail: Load Images for trusted senders

Hi,
Within mail / Preferences, I've disabled loading images for all received email. However, I'd like to be able to automatically load images for any sender in my address book or use some other whitelist mechanism to trust certain senders so that I don't have to "load images" so often. Any ideas?
Thanks,
Robert

This may be a question for the Apple Script forum, as mail rules has the capacity to run an apple script based upon set criteria.
Something like:
on new received message > checked senders > if sender is in address book > run apple script to load images.
If I was an apple script type I might be able to help, sadly though I am not.
Try posting here: http://discussions.apple.com/forum.jspa?forumID=724
I hope you find a successful solution.
Cheers!
Michael

How to create a full system image for Solaris 10 with ZFS

Dear friend,
could you please advice which way to create a full system image for Solaris 10 with ZFS is trusted and practically used?
I'm searching the analogy like Norton Ghost or Acronis True Image but with ZFS support.
I have x86 server Sun Netra X4270.
Thanks in advance,
Dina

One more question Filip,
is it correct, that I should make 2 separate backup for ispool and rpool?
And is it important in which order to restore them from backup?
bash-3.2# zpool list
NAME    SIZE ALLOC   FREE CAP HEALTH ALTROOT
ispool 136G 8.08G   128G   5% ONLINE -
rpool   136G 44.1G 91.9G 32% ONLINE -
bash-3.2# zfs list
NAME                             USED AVAIL REFER MOUNTPOINT
ispool                          8.08G   126G    31K /ispool
ispool/iserver                  8.08G   126G 8.08G /export/home/iserver
rpool                           44.4G 89.5G 46.5K /rpool
rpool/ROOT                      39.1G 89.5G    31K legacy
rpool/ROOT/firstbe              39.1G 89.5G 14.1G /
rpool/ROOT/firstbe/export       20.1G 89.5G    32K /export
rpool/ROOT/firstbe/export/home 20.1G 89.5G 20.1G /export/home
rpool/ROOT/firstbe/opt           651M 89.5G   133M /opt
rpool/ROOT/firstbe/opt/SMAW      518M 89.5G   518M /opt/SMAW
rpool/ROOT/firstbe/usr          3.45G 89.5G 3.45G /usr
rpool/ROOT/firstbe/var           867M 89.5G   867M /var
rpool/dump                      1.00G 89.5G 1.00G -
rpool/swap                      4.25G 89.8G 4.00G -
Br,
Dina

HT1212 My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this pro

My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?

On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

Has anyone come up with a spreadsheet for investment tracking?

Has anyone engineered a fairly simple spreadsheet for investment tracking?
I'm using the Office 2008 Excel template, but it seems squirrelly/fragile. I don't want to get all my info into it and have it fold on me.
Thanks,
John
MBP, Mavericks

There are hundreds a quick Google search found:
http://office.microsoft.com/en-us/templates/my-financial-portfolio-TC103827362.a spx

Has anyone experience problems with loading the latest Flash Play?

Has anyone experienced problems with loading the latest Flash Player? I have done this several times and the same results come up - Install the latest Flash Player. I run Microsoft Vista.

What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Has anyone built a job scheduling interface for BMC's Control-M product

Has anyone built a job scheduling interface for BMC's Control-M product? If so - how did you notify control-m when the XI job completed successfully versus unsuccessfully?

Have you received any help on this? I would like to know the answer to this question.

Has anyone heard of an iShine sleeve for an iPhone?

Has anyone heard of an iShine sleeve for an iPhone 4s?

http://www.ishinesleeve.com
Seems awfully expensive for a piece of microfiber...

My iPhone was downloading iOS8 and it has been frozen on the loading screen for 5 hours

My iPhone was downloading iOS8 and it has been frozen on the loading screen for 5 hours, I have plugged it into my iMac but the iMac can't cancel the download without me typing in my password on my phone, which conveniently isn't working
It won't power off or on or anything, it is just stuck on the white background with black apple sign!!

Hi esmelicious,
Welcome to the Apple Support Communities!
I know it can be frustrating when you run into issues updating to the new iOS. In your specific situation, I would recommend placing your iPhone in what is called recovery rode and restore it from there. Please use the steps and information located in the attached link to restore using recovery mode.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Have a great day,
Joe

Has anyone come across the 'insufficient data for an image' bug in Reader 9.5.1??

We have an application that uses Reader to open scanned documents containing JP2K images and our users are intermittently getting this error however I can only find instances online of this bug from version 9.5.2 up.
Has anyone seen this bug in 9.5.1??
Thanks.

Hi, thanks for getting back to me so quickly. Our application uses scanned images up to 10 years old, and there are thousands of images so we cannot rescan these unfortunately.
I work in a large organisation with it's own desktop team so unfortunately I can't upgrade the version of Reader on our user's machines to see if this resolves either. The desktop team will also not upgrade the version as the problem appears to have only started in 9.5.2.
Does anyone know how I can confirm if the problem was first seen in 9.5.2 or if there were instances in 9.5.1 also?
Thanks again

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

I have "Load Images Automatically" disabled. How can I load images for ONLY the page I am currently viewing?

I have intentionally disabled "Load Images Automatically" so that it is easier to view my desktop remotely via VNC or Remote Desktop. Animations and other graphics kill the performance of these remote viewing apps. However, when I reach a desired web page (the one I really intend to read in full), I want to load all the images ***for that page only***.

I don't think Firefox has that features. It views loading images as a permissions issues toggled on a site-by-site basis rather than a performance issue toggled on a page-by-page basis.
Maybe an add-on would give you a better balance of features? These two popped up in a quick search:
[https://addons.mozilla.org/en-US/firefox/addon/image-block/ Image Block :: Add-ons for Firefox]
[https://addons.mozilla.org/en-US/firefox/addon/imglikeopera/ ImgLikeOpera :: Add-ons for Firefox]
If you try either of these, let us know what you think.

Has anyone created an animated loading image for a WebApp?

Similar Messages

Maybe you are looking for