Has Anyone deployed an EMC Symmetrix VMAX 20K using FAST VP in a 50 TB RAC Environement?

Hi All:
My organization is about to undertake a hardware upgrade/migration of our largest dataset -- currently about 37TB and growing. Our intial provisioning will be for 50 TB. The RAC cluster will be 3 8 core servers with 256 Gb RAM and fiber attached EMC storage. We've met with the EMC reps and they are touting their tiered stroage solution called FAST VP. They use a mix of SSD, Fiber Channel and SATA devices and supposedly the SAN 'migrates seamlessly the data amongst these devices by activity'. my concern is that this is a DSS environement with little or no frequently accessed data to warm up into either cache or 'hot' storage. Our workload is characterised by massive parallel queries that do full table scans. I can't see how FAST VP will work to our advantidge in this envriorment and wanted to reach out and see if other DBA's are using this technology and what their perceptions are.

Similar Messages

Has anyone deployed converged access with 3850 switches and 5760 WLCs?

Has anyone deployed a converged access network architecture with 3850 switches and 5760 WLCs? I have done lots of projects with the 5508 WLCs In a centralized deployment. Basically with this design, I manage 2 logical networks as the wireless network is an overlay over the wired network. I can design firewall to segregate traffic between the wired and wireless hence I can carry both staff and guest traffic.
Now Cisco is telling us that there is new design such that the dats plane traffic can be dropped locally through the 3850 switched. I am not sold on this and have not found any recommended best practices on when should we use a converged access architecture.
Pros
With converged access, data traffic is terminated at the MA which is on the switches, hence the WLC will not be a bottleneck? This is to prepare adoption for 802.11ac?
Less hops for voice calls from user A to user B as data control traffic is dropped locally.
Cons
Now how do I segregate guest and staff traffic if my security folks say I need a firewall?
Troubleshooting wireless client mobility will be a nightmare as the 3850 switches are MA.
Pushing and upgrading code for the Code will mean upgrading the stack of switches in the LAN riser. This will be painful in a huge campus environment like an university.
Can someone convince me why would a customer choose converged access?
Sent from Cisco Technical Support iPad App

They choose CA because of the capwap termination at the switch. You can still use a 5508 and tunnel guest to a DMZ segment if you wish. You will need a 5508 though is you want to tunnel traffic to an anchor WLC.
Sent from Cisco Technical Support iPhone App

Has anyone been able to export to flash using a Blu-ray Project in CS3?

Has anyone been able to export to flash using a Blu-ray Project in CS3?
If so what files, settings and OS were you using?
Whenever I try to export to flash from a Blu-ray project the program always crashes.

S&G wrote:
Eric Root's posting answered my question. He said to downlaod DiskmakerX. It worked like a charm to create a bootable Mavericks Installer Flash Drive.
tips on use: https://discussions.apple.com/message/18705466

Has anyone deployed Oracle Identity Analytics applciation in Websphere?

Hi All,
I am facing an issue in accessing the deployed application.I have deployed the application on the default virtual hosts The appserver logs does not show any errors but the application could not be accessed using the url. Below is the URL i am using.
http://appservername:9081/rbacx.
If anyone has already deployed OIA in Webspshere, please let me know the steps you had followed or atleast how you are accessing the application.
Below are the details of my deployment.
OIA version : 11.1.1.3.6
Websphere version : 7
Thanks,
Jayakumar.

Bryan,
I also put a lot of weight in Tom’s posts; I am however convinced that contacting Oracle Support is a better solution for direct, bug related questions. I do, for example not doubt that his human tasks did not work when put in parallel flows. There might be workarounds, such as putting the human workflow stuff in a separate service, but to me sounds like a bug and bugs should be reported, analyzed, and fixed.
As you can see from my profile, I do not live in Poland so I do not know about the training situation there, but I have, personally, delivered five SOA Suite classes so far during 2007 and I know that I am not the only one running SOA training in Sweden. I might be wrong, but based on my own experience, I have assumed that the lack of training that Tom is experiencing is due to communication problems, and that contacting Oracle Education would sort things out. (Training in Europe tends to be given in the local language. A quick look at the web shows that the next 5 day SOA Suite training in Poland seems to be scheduled for November 19th.)
On the topic of frequent changes in interfaces as mentioned above, I agree that an update of the table structure in a database must never cause business process updates. If that is the case, the architecture most likely suffers from tight coupling. I never recommend anyone to use adapters direct from BPEL try to but use (coarse gained) services published on the service bus as much as possible to avoid such problems. For an introduction to SOA best practices see (for example) Dave Schaffer’s 7 Steps to SOA in SOA World Magazine.
I am sorry if you feel that my posts are not providing the level of support you where hoping to find. Perhaps it is our expectations community/forums vs official product support that differs. Regarding whether Oracle has figured it out or not, you do not have to trust me – take a look at what InfoWorld or Forrester are saying.

Best, 
Mathias

Has anyone gone to Europe from US and used the IPAD charger with only a plug adadpter and had no problems?

Has anyone gone to Europe from the US and used the IPAD charger with only a plug adapter? I want to be sure I won't burn up my IPAD.

Just using an adapter will be fine. The charger can handle to 220V just as well as the 110V

Has anyone deployed JAX-RPC based webservices on WebLogic8.1

Hi all...
I 've been trying to deploy the jaxrpc based webservices on weblogic8.1/6.1....but its not working...it works fine on tomcat server...
so if anyone has deployed and tested the webservices on weblogic successfully...pls help..
thanks
khajaM

Jwenting,
Thanks for your reply.Could you please tell me what should I need to perform to overcome this problem.I have pasted below my client program for your reference.
import org.apache.axiom.om.OMAbstractFactory;
import org.apache.axiom.om.OMElement;
import org.apache.axiom.om.OMFactory;
import org.apache.axiom.om.OMNamespace;
import org.apache.axis2.Constants;
import org.apache.axis2.addressing.EndpointReference;
import org.apache.axis2.client.Options;
import org.apache.axis2.client.ServiceClient;
import org.apache.axis2.context.MessageContext;
public class AxisBasedClientForJWS {
private static EndpointReference targetEPR =
new EndpointReference("http://localhost:7001/final/IntegWebservice");
private static OMElement getResponse(String symbol) {
OMFactory fac = OMAbstractFactory.getOMFactory();
OMNamespace omNs = fac.createOMNamespace("http://IntegratorWebservices.org/wsdl","");//"http://IntegratorWebservices.org/wsdl", "tns");
OMElement method = fac.createOMElement("add", omNs);
OMElement value = fac.createOMElement("symbol", omNs);
value.addChild(fac.createOMText(value, symbol));
method.addChild(value);
return method;
public static void main(String[] args) {
try {
OMElement getResponse = getResponse("WSO");
Options options = new Options();
options.setTo(targetEPR);
options.setTransportInProtocol(Constants.TRANSPORT_HTTP);
ServiceClient sender = new ServiceClient();
sender.setOptions(options);
OMElement result1 = sender.sendReceive(getResponse);
String response1 = result1.getFirstElement().getText();
System.err.println("Current price of WSO: " + response1);
} catch (Exception e) {
e.printStackTrace();
System.out.println(e);
With regards
Ramesh.G

Cisco CSM - Has anyone deployed it in their environment for IDS/IPS devices

We are an MSP and are evaluating Cisco CSM to manage about 50 IDS/IPS devices. Each of these devices has their own customer signature policy.
Does anyone use it in their production environments? Do you find it useful?
Regarding policy management for devices that already have a signature policy, I know you can discover the policy, what we want to do is take the current discovered policy, modify it if we need to and then re-deploy it to the device. I'm finding that this is all read only once the policy is discovered.
Is there a way to modify the signature, for example, adding a logging parameter and then re-deploy?
Just curious if others had similar experiences with CSM.
Thanks!

haxworthy,
I currently use CSM to manager a variety of IPS devices (IOS IPS, 42xx Sensors, 65xx-series blades). The policies vary on some devices. CSM works wonderfully. CSM discoveries the various policies on the device on an individual basis. Policies can then be edited on a per-sensor basis or on a group level. Has worked wonderful in our environment. A nice upgrade from the old IPSMC. Let me know if you have any other questions.
-Mike
http://cs-mars.blogspot.com

Has anyone deployed in production using SOASuite ?

Just want to check if anyone is using ESB / Oracle BPEL in production.
Lately we have been facing some issues and we r wondering if we should cut our losses or is it worth continuing ?

Bryan,
I also put a lot of weight in Tom’s posts; I am however convinced that contacting Oracle Support is a better solution for direct, bug related questions. I do, for example not doubt that his human tasks did not work when put in parallel flows. There might be workarounds, such as putting the human workflow stuff in a separate service, but to me sounds like a bug and bugs should be reported, analyzed, and fixed.
As you can see from my profile, I do not live in Poland so I do not know about the training situation there, but I have, personally, delivered five SOA Suite classes so far during 2007 and I know that I am not the only one running SOA training in Sweden. I might be wrong, but based on my own experience, I have assumed that the lack of training that Tom is experiencing is due to communication problems, and that contacting Oracle Education would sort things out. (Training in Europe tends to be given in the local language. A quick look at the web shows that the next 5 day SOA Suite training in Poland seems to be scheduled for November 19th.)
On the topic of frequent changes in interfaces as mentioned above, I agree that an update of the table structure in a database must never cause business process updates. If that is the case, the architecture most likely suffers from tight coupling. I never recommend anyone to use adapters direct from BPEL try to but use (coarse gained) services published on the service bus as much as possible to avoid such problems. For an introduction to SOA best practices see (for example) Dave Schaffer’s 7 Steps to SOA in SOA World Magazine.
I am sorry if you feel that my posts are not providing the level of support you where hoping to find. Perhaps it is our expectations community/forums vs official product support that differs. Regarding whether Oracle has figured it out or not, you do not have to trust me – take a look at what InfoWorld or Forrester are saying.

Best, 
Mathias

Has anyone deployed a midlet on a virtual sensor under windows 7 64 bit?

Hello
I need help and I would really appreciate if any one can save me.
when I want to deploy a midlet on a virtual sensor in Solarium, I get this error: "Cannot load C:\Program Files\Java\jdk1.7.0_21\jre\bin\client\jvm.dll"
My OP is windows 7 (64 bit). my java is also 64 bit and I should remind that there is no jvm.dll in in client folder in 64 bit java. So I set the address of jvm.dll to:
"C:\Program Files\Java\jdk1.7.0_21\jre\bin\server"
but still I get the same error.

Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/

Has anyone deployed Web Services on J2EE RI 1.3.1 using Studio ?

I am getting the following run time exception -
java.lang.RuntimeException: Failed to fnd SOAP deployment descriptor by the resource name '/as/WebService/ClaimsManagerWebServiceSOAP.dd'. Unable to automatically deploy as a SOAP service.
at com.sun.forte4j.webdesigner.basecomponent.DeploySOAP.loadRegistry(DeploySOAP.java:47)
And Studio has deployed my service under $J2EE_HOMEpublic_html/ClaimsManagerContext as follows -
ClaimsManagerWebService.wsdl META-INF
ClaimsManagerWebServiceClient_Error.jsp original.war
ClaimsManagerWebServiceClient_SOAP.html soap.xml
getLightWeightClaims_SOAP.jsp WEB-INF
and under WEB-INF/classes/as/WebService i have my .dd -ClaimsManagerWebServiceSOAP.dd

Sorry : my version xmlpserver is 101342

Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

Thanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

Has anyone had issues with their galaxy s4s using alot of data for no reason at all?

I had my data on both phones and internet peice at home turned off and got 3 overages within 15 mins of each other . I calle verizon to help with the situation... but no help. They said that we were using the data? I work in a wireless center so i know how to turn it off and I KNOW it was off. Its ridiclous that my husbands new s4 has used 23 gb of data when he isn't using it that much. Im stuck now paying a 444 bill because this phone is wacko. Ive been with them over 3 years. He just upgraded. Why wont they try to do something to help... all they say is ma'am you are using that much data. Um no we aren't. STUPID. Im beginning to HATE!!! verizon. Im out of contract. Thinking about closing my account and going with someone cheaper, because I cannot afford a 444 bill every month because they won't help fix the situation.

fallenangelgirl99, we don't want you to go and we're here to help in any way that we can. You have the option of changing your plan during the bill cycle to avoid data overage charges. Did you receive usage alerts via text message? http://vz.to/1hvu4tP Let's make sure that you're on the best plan to fit your usage: http://vz.to/1qhEcv5
LasinaH_VZW
Follow us on Twitter @VZWSupport
LasinaH_VZW
Follow us on Twitter @VZWSupport

Has anyone tried to program a ST7 microcontroller using LabVIEW

I'm looking to perform ISP (In-Situ Progamming) on a ST7 microcontroller using LabVIEW and a data acquisition card. Anyone with this sort of experience?

Danielle,
i didn't say that a FGV is not good for the task. I only doubt that a single FGV will do the job.
dsavir wrote:
[...]because we always adding new capabilities to our hardware[...]
Does that require complete new elements in your datastructure? If yes, it is very hard to solve it.
I asuyme that most changes can be captured by using "intelligent" elements in your datastructure like enums and typified clusters.
Bringing up a very important point: In situations like this, it is imho mandatory to create good typedefinitions in order to keep proper versioning.
Working with SCC helps a lot, too, because you can track all changes made over time very easy, and switching back is possible as well.
Regarding the queue-question:
There are many good examples/tutorials and posts available, so please do a short search.
I recommend you to start here.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Has anyone been able to update to Mango using Windows Phone 7 Connector (for Mac) ?

I've been trying to update my Trophy, but have not been able to get past the 7392 update. Since I am on a Mac, I have been using the god-awful Windows Phone 7 Connector. I've tried using Windows, through Parallels, but it bogs my machine down so much, I can't tell if the software has crashed or the machine is frozen.
Looking for ways to Jedi Force the update all point to using a PC and Zune, but nothing for Windows Phone 7 Connector.
Thanks, in advance.

In the case of the Mac, I would have to suggest that you just be patient. I am not familiar with the Windows Phone Connector, but the reported "force" of disconnecting the internet connection while checking for updates is a Zune workaround, not advertised in any way to work on a Mac.
It is not Verizon who is holding back the update. Microsoft had announced in the beginning that they were going to roll it out in a controlled fashion, with only 10% during the first week, and ramping things up if they went smoothly. Things DID go smoothly, and they have ramped up, and from what I have read, at this point the update is available to about 50% of Windows Phone users. As reported by WPCentral, after ten days, 20% of users are running Mango. Compare that to 38% of Android users being updated to Gingerbread 10 MONTHS after the update was released (http://www.wpcentral.com/just-ten-days-microsoft-has-updated-20-phone-mango-world-wide-android-weeps). Microsoft is well ahead of that curve. Remember - they have said that they expect everyone to have Mango available to them by the end of October. I know it is hard to sit and wait while your friends are using Mango, but I hope this helps you.

Has anyone experienced the loss of audio when using Apple TV when it has been working fine?

I can't get any audio through my reciever when using Apple TV. It's been working fine until a week ago. I've check my reciever, unplug the TV, and Apple TV as described but nothing. I switch to my Direct TV input and I can get audio when not using ATV. I've tried most everything I've read on blogs but nothing. One of those "pull your hair out" issues. Any direction would be appreciated. Thanks, Vince

Hi there Vfall!
I have some information for you that can help you troubleshoot this issue:
If you can see video but can't hear sound
If Apple TV is connected to a receiver, make sure the receiver is turned on.
Make sure the input setting you've selected on your receiver matches the input you have your audio cables connected to. See the documentation that came with your receiver for more information.
Make sure the volume on your TV or receiver is turned up and isn't muted.
Check whether you can hear sound while playing video only. Also, check whether you can hear audio feedback while clicking through menu options.
If you're connected to the HDMI port on your TV and Apple TV, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video.
If you are using HDMI audio, try disconnecting and reconnecting the HDMI cable.
If you're connected to the HDMI port on your TV and Apple TV, make sure your TV is setup to receive audio from HDMI. For some TV's this is automatic, but for others there is a choice between digital and analog (for HDMI audio, choose digital). Read more about HDMI audio.
Try the other audio outputs on Apple TV to see if they work.
If possible, try using different audio cables.
This information is taken from the following article:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Has Anyone deployed an EMC Symmetrix VMAX 20K using FAST VP in a 50 TB RAC Environement?

Similar Messages

Maybe you are looking for