Has anyone developed drivers for ADMC401 from Analog devices?

I am trying to develop an interface to an ADMC401 which uses ADSP2171 processor. I am wondering if any one has developed any drivers for this.

Hello,
I did a quick web search and was unable to find any 3rd-party LabVIEW drivers for this device. Your best bet is to check with Analog Devices and see if they have any LabVIEW drivers for this hardware.
I wish you luck in your search. Have a pleasant day.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • Has anyone developed drivers for the tektronix TLa 715 Logic analyzer

    I am looking for drivers for a Tektronix TLA 715 logic analyzer

    You can submit an Instrument Driver Request at:
    http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/
    We develop drivers based on demand and instrument availability. We would be potentially interested in creating a driver for the Tektronix TLA series of instruments. Would you be able to loan us a TLA for the duration of our development effort?
    You may find the Instrument I/O Assistant (http://www.ni.com/labview/express_demos.htm) valuable for controlling and communicating with instruments when drivers do not exist.
    Jason Hobbs
    Instrument Drivers

  • Has anyone ever had an email from Apple asking them to update their details for their Apple account on IPad? Kinda worried as it asks for my bank details and bank account number and security code on the back of the card. Thanks :)

    Has anyone ever had an email from Apple on IPad asking them to update their account details? The email seems genuine enough as it asks you to sign in with your Apple ID and password and takes you through to the Apple site but am a bit worried as they ask you in the section Update Your Apple account for bank and credit card details and for the security number on the back of the card. Also in the section where it asks for my mobile number it will only take 10 numbers and when ai try to put in the final (11th number) it won't let me. Sorry am new to all this and a bit confused! Any help is gratefully appreciated.....Thanks.

    That is phishing attack
    Someone, other then Apple, sent it to you
    Read http://support.apple.com/kb/ht4933
    Allan

  • Has anyone developed any Elemental I/O libraries for the C6713?

    I just set up my TI DSK6713 with Labview's Embedded Module, but have found that there are no Elemental I/O libraries in the package.  In fact, the package seems to lack the level support that it boasts on the website.  Has anyone developed Elemental I/O libraries or know of a good tutorial/book that I could reference when building the library?

    Hi,
    The LabVIEW Embedded Development Module contains several example targets. These example targets each contain a subset of the available features in LabVIEW Embedded (such as Elemental I/O). There is a chart in the LabVIEW Embedded Porting Guide that lists the features contained in each of the example targets.
    The DSK6713 example target does not contain an implementation of Elemental I/O. The Windows/Unix console targets and the PHYTEC LPC229x target all have an Elemental I/O Implementation that you can base the design of your own custom Elemental I/O on. The Elemental I/O Wizard is used to create new Elemental I/O for custom targets.
    I am attaching a snippet of a presentation on Elemental I/O. I recommend using this, the Porting Guide, and myself as resources for more information on creating custom Elemental I/O.
    Michael P
    National Instruments
    Attachments:
    EIO.ppt ‏164 KB

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • Has anyone had deleted photo's from months ago reappear? I have a 3gs running iso4

    Has anyone had deleted photo's from months ago reappear? I have a 3gs running iOS 4.3.2

    Justin,
    Ok, if that's the way it works that's the way it works. Atleast until you suggest a feature change and it gets reprogrammed. And an option (other than the SHOW DATE/SHOW TIME) is not necessary, just the time showing WHEN the channel info disappears.
    I have also seen and heard what looks like RF interference. A small amount of line noise (a couple partial lines only) and crackling that does not happen all the time. Is it possible that some device or appliance in my house or the houses on either side of my home can cause RF interference with the FIOS equipment??
    As for the issue with the guide, IMHO that sux! Basically you are telling me I am forced to pay an extra $8/month just to have the channel guide? Even with basic Cable (Time Warner) a guide was available! How about a guide channel like TWC
    Koz
    Justin wrote:
    1) That is the way it works. There is no option to change this, other than the option to display either the channel number or the time. Actually the time is displayed once the channel is changed when the time in the STB reaches the next minute, so the delay can be very short or up to one minute.
    2) Most of the time I do not see the flash or hear the pop. But occasionally I do, on any channel change, SD or HD. I have never been able to figure out what causes it to start doing that, or what causes it to stop. It starts, does it for a while, and then I realize it is no longer doing it.
    3) No Guide on the DCT-700. Plus no VOD, widgets, or HD. If you want the Guide, you have to get one of the 6xxx or 7xxx STBs.
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.7C, Build 09.83
    Keller, TX 76248

  • Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

    Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the hard drive does not appear in the DU sidebar list then it has died and will have to be replaced. No need to proceed beyond this point.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Has anyone removed the screen protector from Otterbox?

    I have the Otterbox on top of Apple's anti-glare screen protector as suggested in this forum. I'm having way too much trouble getting a response out of buttons on the edge of the screen or in the corners. I touch and touch, even press hard but no response. Even getting the phone to snap a picture is near impossible. I have no problems when I remove the Otterbox case, so I know it isn't a screen issue. I love the feel and protection afforded by the Otterbox case and would like to use it. Has anyone removed the screen protector from their case, and if you have, can you comment on the subsequent performance of it? Of note, I use the Otterbox case because I have young kids who use the phone - we don't have a landline. In other words, it's not dust protection I'm looking for, but impact protection. I hate to tear up a $50 case if it won't function anymore.

    I removed the screen protector that was part of the Otterbox case and it now works much better. Still have the Power Support anti-glare screen protector on it. Also removed the small cover over the camera lense and now my pictures are more clear. Finally, I removed the covers over the speakers and I can hear the speakerphone again. These mods made the case an A+ for me. A little less protection but much better functionality.

  • Has anyone got photostream to upload from a pc yet?  Works fine between my MacBookPro and iMac and TO my PC's but not FROM my PC's

    Has anyone got photostream to upload from a pc yet?  Works fine between my MacBookPro and iMac and TO my PC's but not FROM my PC's

    Same here.  Seems to download great, but upload is a problem.  Searched for some type of file size / type restriction, but the help pages do not seem to be in place yet.

  • Has anyone received a good iPod from Apple online store?

    Has anyone received a good iPod from Apple online store yet? (38th week batch without screen issue)

    Also got a week 38, came two days ago. Everything, including the LCD displaying black, seems perfect.
    I had been holding my breath for the past week. The LCD problem worried me so much that I tried to cancel my preorder to the Apple store. Becuase I had it engraved, I couldn't cancel.
    For me, it all seemed to work out.

  • Has anyone received advertising for software called "Mackeeper".  Does anyone know if this is supported by Mac, and has anyone used this software?

    Has anyone reveived advertising for software called "Mackeeper".  Does anyone know if this software is supported by Mac, and has anyone used this software?

    Thanks Kappy, I let it do the scan and when it stopped halfway through and demanded registration I stopped and deleted it.  I still have the icon in the menu bar at the top of the screen and don't know how to remove it.  If this is not possible I can live with it.  I am new to Mac and have trouble divorcing myself from my old PC habits!

  • Does anyone have drivers for Cesar RF power generator?

    I'm trying to data log an RF generator model: Advanced Energy Cesar RF power generator.
    Wondering if anyone has created the drivers for this tool.

    Hi,
    You can use your RF Generator with LabVIEW through NI-VISA. What you need to do is to select the version of NI-VISA that you need based on your operating system and LabVIEW version.
    At the following link you can review the compatibility between LabVIEW's version and NI-VISA's version:
    http://digital.ni.com/public.nsf/allkb/E7C93038169​B6E7686257847004B8B9C?OpenDocument
    Later that you select the NI-VISA version that you need based on LabVIEW, you can select you NI-VISA's version based on your operating system, as you can review at the following link:
    http://www.ni.com/nisearch/app/main/p/bot/no/ap/te​ch/lang/es/pg/1/sn/catnav:du,n8:3.25.123.1640,ssna​...
    Regards,

  • Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
    Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

  • Has anyone used MDC for R/3 Systems?

    Hello,
    We have a custom transaction that we run against our R/3 (ECC 6.0) system that's performing poorly.  Adding an index helped but it's not enough to make the transaction run within the 10 minute timeout period configured for dialog processes.  I am testing defining the table as an MDC table.  I know SAP supports this for BI systems but has anyone tried it for R/3?
    Thanks,
    Florencio

    Hello Florencio,
    here I have to correct Maltes statement.
    INCLUDE columns in an index, MDC tables and some other DB2 features are "supported" in the ABAP DDIC. Supported here means that if a database object which uses one this these DB2 specific features needs to be changed (for instance during an upgrade) the ABAP dictionary will ensure that these features survive the modification.
    We know that there are scenarios where it makes sense to use these DB2 specific features. So, if you know what you are doing, you are free to use MDC organized tables, INCLUDE-columns in indexes etc. in your R/3 OLTP system.
    To find out what exactly is supported by the ABAP DDIC, please refer to chapter 7.3 ('Tables and Indexes') in the [DB2 Database Administration Guide|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03d5fb8-b619-2b10-c383-c6d56872829e]. Not all features are supported in all R/3 versions.
    Also note that the support for specific DB2 features is continiously extended. For the forthcoming version of DB2 e.g. we plan to support table partitioning in the ABAP data dictionary.
    Regards,
                                              Johannes

  • Has anyone evaluated PortalStudio 2.0 from Mongoose

    Has anyone evaluated PortalStudio 2.0 from Mongoose
    Technology?
    Can you share your opinions on their portal lifecycle management
    tools?
    http://www.mongoosetech.com/products/portalstudio.html
    Thanks in advance.

    Pages 2.0.2 is a (by now) very old version from 2006.
    Pages 3.0 released as part of iWork '08.
    Pages 4.0 Released as a part of iWork '09.
    You would need to buy Pages 4.0 to be able to upgrtade to Pages 4.1
    Regards,
    Colin R.

Maybe you are looking for

  • Performance issue and functional question regarding updates on tables

    A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table.  Here is what I would have expected to see as the code.  Assume that both sets of code have a parameter called p_werks which is

  • Startup Plug Error

    Hi All,     I have 2 sample applications say Exportex1 and Exportex2. When I deploy exportex1from one machine and check for output,  it is working fine as expected.  When I deploy exportex2  from another machine,  it is also working fine. But Exporte

  • Issue in class loading in weblogic 10.3

    Hi, let me explain the problem. I have a jar file called table.jar in WEB-INF/lib folder. I'm able to deply the war file on weblogic 9.2. But when I'm trying to deploy the same war on 10.3 it gives and error while deployment: Servlet: "StartupSetup"

  • HT3529 How do I create a group in my message app?

    I need to set up a group of about 30 people and I don't want to manually put them in the recipient box every time. Plus, if any of them text me back I don't want the whole group to see that text.

  • Class conversion

    Hello, I'm stuck into a very simple thing. I've a class A, and a subclass B. Then I create an object that way: A myObject = new B(); Then, what do I get from B? I mean, do I get B methods? B attributes? Not B methods, but overwritten methods such as