Has anyone done 3G speed tests yet?

I assume all the problems mentioned here will get worked out in short order, but I've seen nothing here comparing 3G speeds to Wifi speeds on these new units.
If anyone has done some test along these line, could you post results?
Thanks--

I know some people have been having problems with the 3G but I have been very happy with it so far. Setup took about 30 seconds yesterday. Initial speeds were around 1.8 Mbps download, then later slowed to around 1mbps, likely due to all the demand. Every speed test I ran showed the iPad to be at least 20% faster than my iPhone 3G. Around midnight it began to speed up as people went to bed - at one point I had 3.2mbps download, which is excellent considering AT&Ts max theoretical speed right now is 3.6mbps. I have never had a speed over 2.2mbps on my iPhone.
Today I was using it in the car on a route I often take. One area along the drive is an AT&T dead zone - my iPhone always drops to "No Signal" as do any other AT&T phones. Despite this, my iPad held on to 4 bars and managed a 1mbps speed test in the heart of the dead zone. I also have found the WiFi on the 3G model to be slightly stronger than the wifi only model, presumably due to the plastic top which breaks the aluminum case.
I for one do not have any problem with AT&T restricting some of the video apps. The iphone was the same way and I wasn't expecting the iPad to be any different. All in all I am extremely satisfied with my purchase.

Similar Messages

  • Has anyone done any work with the "Form" Email Feature in 2008?

    Has anyone done any work with the "Form" Email Feature in 2008?
    2006.7
    Oracle 9i
    Websphere 5.11
    IE6 & IE7
    I have been testing the version 2008.2 and noticed the "Form" link in the email templates, has anyone used this or know what its for? 
    It seems like a useful feature, but I can not find any documentation on its use.
    Thank you
    Daniel

    Hi Daniel,
    The HTML widget we have incorporated into the application is an open source tool. It's name is FCKeditor. Here is the URL for the documentation site: http://docs.fckeditor.net/
    - Ed

  • Has anyone done a full install of Win7 RC1 onto a PC built in 2006 or earlier?

    I'm thinking of putting RC1 onto a Presario Desktop PC that came with XP and was built in 2006.
    Has anyone done a full install of Win7 RC1 onto a PC that originally came with XP (built in 2006 or earlier)? I'm curious what the experience was like.
    Was it easy/hard?
    Did 7 catch all the basic drivers?
    What drivers did you have to go looking for - if any?
    Thanks for the help.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

    I've loaded Win7 RC1 on a HP dv8000 notebook that was built in mid-2006.  It seems to have gone ok except for the sound board problem.  There is effectively no sound.  If you turn the volume all the way up, you get very very low sound. 
    I had this problem when I moved from the original operating system XP to Vista, but I can't recall the solution and haven't been able to find a working driver yet.  
    Cap

  • Has anyone seen this voip soloution yet?

    Has anyone seen this voip soloution yet advertised on Nokias website?
    if you take a look at this page it looks like nokia and avaya are getting ready to release a new voip client that can work on series 60 and series 80 phones. it looks prett cool, but i have no idea if this will look at any voip server, or a companies voip server.
    i am guessing that this will be worth a look once it is released, after all it seems the mail for exchange client is now working on Nseries phones which is cool.

    Hello,
    As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
    AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
    I hope that it will take not a lot of time for AVAYA.
    I'll let you know about the results.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to  ICloud Drive or not?  Has anyone done this?  Is it awesome?  I need to be able to access my resume from phone. I think this will help me achieve this.am i right?

    I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to  ICloud Drive or not?  Has anyone done this?  Is it awesome?  I need to be able to access my resume from phone. I think this will help me achieve this?  Am i right?  Is there any body out there right now that could help me?  I'm thinking about going from 8.1.3 to I guess yosemite?  Or is that for Mac computers?  I don't understand the language entirely on the help page.   Anyone's straight forward and easy stepped advice would be much appreciated.  I'm so frustrated and I need a job so badly!  Drowning in debt.  Any help appreciated!
    Thanks,
    A

    You're a Windows user, correct? If so, read here:
    http://support.apple.com/kb/DL1455

  • I am trying to generate a 50kHz sine wave for ten cycles, then aquire this waveform and store it in a file, I am using a PCI-Mio 16E-4 board, has anyone done anything like this?

    I am trying to generate a 50kHz sine wave output on the DAQ card and then simultaneously recieve. I am using a PCI-Mio 16E-4 series board to do this. Has anyone done anything similar. I can generate a 50k wave no problem, and recieve one, but I can not get these vis to run together? Any suggestiosn

    Jrod, yes you should be able to do this, actually there are quite a few example programs come with LabVIEW that handles simultaneous analog input and output, I check the specs of the board you use, the board should be able to handle the sampling/generation rate, but make sure for 50KHz sine wave, you would sample at least twice as fast, preferably ten times the generation rate, then this puts the sampling of the board to thew limit.
    The program you can try is attached here, good luck with the application,
    XD Gao
    Applications Engineering,
    National Instruments
    Attachments:
    Simul_AIAO_Buffer(E-series).vi ‏104 KB

  • HT201270 Has anyone done this update? Is this update worth it? what are the main features of this updates?

    Has anyone done this update? Is this update worth it? what are the main features of this updates?

    What version are you on now ? If you are on 5.1.0 then the update to 5.1.1 is very small - from here :
    Improves reliability of using HDR option for photos taken using the Lock Screen shortcut
    Addresses bugs that could prevent the new iPad from switching between 2G and 3G networks
    Fixes bugs that affected AirPlay video playback in some circumstances
    Improved reliability for syncing Safari bookmarks and Reading List
    Fixes an issue where 'Unable to purchase' alert could be displayed after successful purchase
    If you are on an earlier iOS version then you will get the intermediate updates as well e.g.
    iOS 5.1 : http://support.apple.com/kb/DL1504
    iOS 5.0.1 : http://support.apple.com/kb/DL1472

  • Has anyone done work in LabVIEW with the LLRP protocol for RFID readers?

    [cross-post]
    Has anyone done work in LabVIEW with the LLRP protocol for RFID readers?  I've googled around and didn't find anything.
    Message Edited by Jim Kring on 10-31-2008 10:45 AM

    Hi G-Money,
    The communication will be over TCP-IP.
    Thanks for your offer to help.  I don't really need assistance in figuring out how to communicate with the device in LabVIEW at a transport layer.  I'm just trying to take inventory on what's already been done, at a messaging protocol level, that could be useful as a reference or starting point.
    Thanks,
    -Jim

  • Lenovo s12 3g sim slot, can this be done? has anyone done this

    hi all i was looking for some advice before i attempt this project, surely someone else must have attempted this before me
    i want to install a wwan controller a sierramc8775 and wwan antenna so i can install my sim card and run 3g
    as anyone done this? if you have i would appraciate the name of the controller, drivers and software and a guide on how this was done
    has anyone done this? it seams a shame the s12 has this capability but it is not neen used
    any info would be appreciated

    Hi and welcome there.. 
    known a  user who got 3G working in S12 ION ....with  Huawei UMTS Modul EM770  in conjunction with a self layered antenna.. 
    SE 3507 could be one possible 3 G  and
    Gobi2000
    But Sierra mc 8775  will not work... 
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • I have an issue with Iphoto, it has told me to reinstall it has anyone done this? Can you help?

    Hello
    I have an erro message come up when I try to start up iphoto, it suggests I reinstall it. Has anyone done this before?
    I originally down loaded iphoto by disc 3 or 4 years ago, i do not have the disk anymore.
    Can i uninstall iphoto and then buy it from the app store and will it keep my photos or will i have to reinstall them as well?
    Many thanks someone!
    Rosie

    Yes you can purchase iPhoto 11 on the App Store. It will update your Library. But, as always, make a back up first.
    Regards
    TD

  • Campaign e-mail with unsubscribe facilty. Has anyone done this?

    We may need to have the functionality to process and remove customers from future campaigns when we send out e-mails via the use of an unsubscribe feature within the e-mail. Has anyone done such a thing.
    I looked for example videos in the CRM area. http://www.sdn.sap.com/irj/scn/crm-elearning?startindex=1
    But could not find anything relavent there.
    Jason

    Still no news on this. I have been unable to find a solution, but refuse to believe that nobody has implemented this feature as Unsubscribing from e-mail is common-place nowadays.
    Jason

  • Thinking about getting a new iMac to use as the main computer.  Has anyone done this?  What is your experience and recommendations?

    We have a 2009 MBP, 2010 MBP, 2011 MBA, an IPAD 2, and several ipods.  Currently, my 2009 MBP is the main computer, holding all the music and pictures.  This has used up the majority of the available storage and definitely slows it down some.  I do back up the full computer to a backup drive and also remove the large movie files to another external drive.  I'm thinking about getting a new iMac to use as the main computer.  Has anyone done this?  What is your experience and recommendations?
    I look forward to all responses.
    Thanks,
    Brad

    Thanks for your response.  I look forward to hopefully learning something new here.
    A good share of my music was added via my CDs, but now everything is added via itunes and occasionally amazon.  Almost all my pictures and video are added through my cameras via iphoto although I have added some with the 'add image to iphoto library' function also.

  • Has anyone tried publishing for Ouya yet?

    Just curious if anyone has tried AIR on the Ouya yet, and your thoughts if so. Despite the mixed reviews about the system, I'm interested in developing for it, but I'd like to hear an AIR developer's experience with the system if possible.

    I've just received the Quicken version for Lion and it crashed on four of my five files.  The 5th file didnot show all the quotes.  I searched the web and found that the new version is having problems with the Quote file.  I tried the suggestion from Intuit. See following URL.
    http://quicken.intuit.com/support/help/quicken-mac-2007-for-lion-crashes-on-lion /SLN59495.html
    With the above you loss all your security quotes and need to repopulate the data file.  I suggest that you try the following process on a Snow Leopard system.
    To avoid a corrupt Quote file perform the following before moving to Lion.  This process will give the Lion version a fresh Quote file.
    1. Start Quicken with you data file
    2. Open File > Export > Selected Items to QIF...
    3. Check only the box for Securities
    4. Quick Quicken
    5. Hold down the Control key and single-click (or right-click) your data file
    6. Select Show Package Contents from the pop-up menu
    7. Control + click on the Quotes file, select Move to Trash
    8. Start Quicken with you data file
    9. Open File > Import > From QIF...
    10. Quick Quicken
    Now all my files run on the Lion version with all the quote values.

  • Can you use Quick book on a Mac. It says you have to use parellels? Has anyone done this?

    Has anyone used Quick book on their Mac in Canada?

    Has anyone used Quick book on their Mac in Canada?

  • Configuring JMS and loadbalancer with SSL termination? Has Anyone done it?

    Hi all,
    I'm having a problem getting JMS or even any JNDI lookup to work with a hardware load balancer and SSL termination. Has anyone used such a configuration? The load balancer in question is a Cisco CSS 11500 Series which has an SSL module. A client communicates with the CSS over SSL, the SSL module decrypts the packets and sends it for content switching and on to WebLogic as cleartext.
    Without SSL termination everthing works fine. With SSL termination active, Web service and web content all work fine, but I can't get SSL tGetting Initial context from ms01
    <29-Sep-2006 16:07:22 o'clock IST> <Debug> <TLS> <000000> <SSL/Domestic license found>
    <29-Sep-2006 16:07:22 o'clock IST> <Debug> <TLS> <000000> <Not in server, Certicom SSL license found>
    <29-Sep-2006 16:07:23 o'clock IST> <Debug> <TLS> <000000> <SSL Session TTL :90000>
    <29-Sep-2006 16:07:23 o'clock IST> <Debug> <TLS> <000000> <Trusted CA keystore: D:/eclipse/workspace/LoadBalancerTest/ssl/keystores/cssKeyS
    ore.keystore>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <Filtering JSSE SSLSocket>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLIOContextTable.addContext(ctx): 886220>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLSocket will NOT be Muxing>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <write SSL_20_RECORD>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <3941240 received HANDSHAKE>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHello>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <3941240 received HANDSHAKE>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Certificate>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <validationCallback: validateErr = 0>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> < cert[0] = [
    Version: V3
    Subject: EMAILADDRESS="[email protected] ", CN=10.51.0.200, OU=Web Administration, O=Revenue Commissioners, L=Dublin, ST=Dublin,
    =IE
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    a8f60248 b87c5860 229b9044 a666a9ae 27eb488c 424d9e67 e7b9d6d0 c292f081
    cfa76c04 f3d89b28 1bf544f9 5de2b66d 576ebeca 5dc5ca8a fceead9a 52e2ce6c
    2b91afef e4da5071 49b8784c 12d7f5f3 99f76482 79efe1d8 0a24f664 4c8d6e9e
    b0bc63be 1faf8319 eeb23e8a 019b65b2 59dd086d 1b714d4c 01618804 66f416bb
    Validity: [From: Fri Sep 08 11:44:28 BST 2006,
                   To: Mon Sep 05 11:44:28 BST 2016]
    Issuer: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    SerialNumber: [    0131]
    Certificate Extensions: 4
    [1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
    Extension unknown: DER encoded OCTET string =
    0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
    0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
    0020: 65 e
    [2]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: 0E 6E 72 2E B1 3B B6 A3 59 79 5A C5 41 26 B7 B6 .nr..;..YyZ.A&..
    0010: A2 39 4C 73 .9Ls
    [3]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE]
    SerialNumber: [    00]
    [4]: ObjectId: 2.5.29.19 Criticality=false
    BasicConstraints:[
    CA:false
    PathLen: undefined
    Algorithm: [MD5withRSA]
    Signature:
    0000: 2C A0 0C 34 4E 0D CA 24 A5 C3 03 3A 71 A1 2D D3 ,..4N..$...:q.-.
    0010: 65 A2 FA EF C1 5D D4 4A 28 8C 1A 70 5F 92 73 5E e....].J(..p_.s^
    0020: 7B 13 D4 AE 36 A8 86 EA 60 7F A5 E3 86 6E 84 1F ....6...`....n..
    0030: 5E 5F 30 06 B4 AA 2E 5C A7 65 74 32 09 0A 91 14 ^_0....\.et2....
    ]>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> < cert[1] = [
    Version: V3
    Subject: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    bc61b29f a830c97a 7a76883e 1665a241 a68b891f 8e4167eb 62e578ac 9e342c3e
    53c9de8b e756634b e364010f 4d36c1c5 21a65b37 b64b4861 6f4dda29 b932191f
    Validity: [From: Mon May 31 15:22:15 BST 2004,
                   To: Thu May 29 15:22:15 BST 2014]
    Issuer: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    SerialNumber: [    00]
    Certificate Extensions: 3
    [1]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [2]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE]
    SerialNumber: [    00]
    [3]: ObjectId: 2.5.29.19 Criticality=true
    BasicConstraints:[
    CA:true
    PathLen:2147483647
    Algorithm: [MD5withRSA]
    Signature:
    0000: 3C 64 7C 9E 0B 90 48 9D 70 74 06 80 7F 2C AF 73 <d....H.pt...,.s
    0010: 92 1C C3 39 DD C3 45 B6 A4 8E 11 27 8E 21 18 4B ...9..E....'.!.K
    0020: FD AA 31 5E 35 FC DF 9E 70 42 F4 65 5C DF 56 9A ..1^5...pB.e\.V.
    0030: DD 8C 6B B7 3B BE E5 A7 D5 4A 16 23 C1 91 07 CA ..k.;....J.#....
    ]>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <SSLTrustValidator returns: 0>
    <29-Sep-2006 16:07:24 o'clock IST> <Debug> <TLS> <000000> <Trust status (0): NONE>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <Performing hostname validation checks: 10.51.0.200>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 received HANDSHAKE>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHelloDone>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 134>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <write CHANGE_CIPHER_SPEC, offset = 0, length = 1>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 16>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 received CHANGE_CIPHER_SPEC>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3941240 received HANDSHAKE>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Finished>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 272>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <3445873 read(offset=0, length=2048)>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3941240 received APPLICATION_DATA: databufferLen 0, contentLength 372>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3445873 read databufferLen 372>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3445873 read A returns 372>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 339>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3445873 read(offset=372, length=1676)>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <Filtering JSSE SSLSocket>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLIOContextTable.addContext(ctx): 6771926>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLSocket will NOT be Muxing>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 93>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 SSL3/TLS MAC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 received HANDSHAKE>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHello>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 SSL3/TLS MAC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 received CHANGE_CIPHER_SPEC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 SSL3/TLS MAC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 received HANDSHAKE>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Finished>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write CHANGE_CIPHER_SPEC, offset = 0, length = 1>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 16>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 402>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 1707>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <23328673 read(offset=0, length=2048)>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 SSL3/TLS MAC>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <3840954 received APPLICATION_DATA: databufferLen 0, contentLength 174>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <23328673 read databufferLen 174>
    <29-Sep-2006 16:07:29 o'clock IST> <Debug> <TLS> <000000> <23328673 read A returns 174>
    <29-Sep-2006 16:07:44 o'clock IST> <Debug> <TLS> <000000> <NEW ALERT with Severity: WARNING, Type: 0
    java.lang.Exception: New alert stack
    at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.closeWriteHandler(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.close(Unknown Source)
    at javax.net.ssl.impl.SSLSocketImpl.close(Unknown Source)
    at weblogic.net.http.HttpClient.closeServer(HttpClient.java:466)
    at weblogic.net.http.KeepAliveCache$1.run(KeepAliveCache.java:120)
    at java.util.TimerThread.mainLoop(Unknown Source)
    at java.util.TimerThread.run(Unknown Source)
    >
    <29-Sep-2006 16:07:44 o'clock IST> <Debug> <TLS> <000000> <avalable(): 23328673 : 0 + 0 = 0>
    <29-Sep-2006 16:07:44 o'clock IST> <Debug> <TLS> <000000> <write ALERT, offset = 0, length = 2>
    <29-Sep-2006 16:07:44 o'clock IST> <Debug> <TLS> <000000> <SSLIOContextTable.removeContext(ctx): 6771926>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <3941240 SSL3/TLS MAC>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <3941240 received APPLICATION_DATA: databufferLen 0, contentLength 98>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <3445873 read databufferLen 98>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <3445873 read A returns 98>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <Filtering JSSE SSLSocket>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLIOContextTable.addContext(ctx): 8406772>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLSocket will NOT be Muxing>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 93>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 SSL3/TLS MAC>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 received HANDSHAKE>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHello>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 SSL3/TLS MAC>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 received CHANGE_CIPHER_SPEC>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 SSL3/TLS MAC>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <21830977 received HANDSHAKE>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Finished>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <write CHANGE_CIPHER_SPEC, offset = 0, length = 1>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 16>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 339>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <5618579 read(offset=0, length=2048)>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:08:13 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    Exception in thread "main" javax.naming.CommunicationException [Root exception is java.net.ConnectException: https://10.51.0.200:8143: Boot
    trap to: 10.51.0.200/10.51.0.200:8143' over: 'https' got an error or timed out]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:47)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:636)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:306)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:239)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
    at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
    at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
    at javax.naming.InitialContext.init(Unknown Source)
    at javax.naming.InitialContext.<init>(Unknown Source)
    at TestAllManagedServers.main(TestAllManagedServers.java:54)
    Caused by: java.net.ConnectException: https://10.51.0.200:8143: Bootstrap to: 10.51.0.200/10.51.0.200:8143' over: 'https' got an error or t
    med out
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:200)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:296)
    ... 7 more
    o work for a simple JNDI lookup. With SSL debugging turned on, the following output is given:
    When I compare the Server HTTP logs I see that an initial context lookup involves 3 HTTP requests, e.g.
    25.2.1.210 - - [29/Sep/2006:16:29:12 +0100] "GET /bea_wls_internal/HTTPClntLogin/a.tun?wl-login=https+dummy+WLREQS+8.1.5+dummy+%0A&r
    and=3018901804201457976&AS=255&HL=19 HTTP/1.1" 200 17
    25.2.1.210 - - [29/Sep/2006:16:29:12 +0100] "GET /bea_wls_internal/HTTPClntRecv/a.tun?connectionID=0&rand=7332722597180897050 HTTP/1
    .1" 200 2341
    25.2.1.210 - - [29/Sep/2006:16:29:12 +0100] "POST /bea_wls_internal/HTTPClntSend/a.tun?connectionID=0&rand=3415396992694182025 HTTP/
    1.1" 200 17
    When my request goes through the load balancer I see the following in the HTTP logs:
    10.51.0.200 - - [29/Sep/2006:16:31:33 +0100] "GET /bea_wls_internal/HTTPClntLogin/a.tun?wl-login=https+dummy+WLREQS+8.1.5+dummy+%0A&
    rand=8279752507152372405&AS=255&HL=19 HTTP/1.1" 200 17
    10.51.0.200 - - [29/Sep/2006:16:31:33 +0100] "POST /bea_wls_internal/HTTPClntSend/a.tun?connectionID=0&rand=1051450669479197885 HTTP
    /1.1" 200 17
    10.51.0.200 - - [29/Sep/2006:16:32:28 +0100] "GET /bea_wls_internal/HTTPClntRecv/a.tun?connectionID=0&rand=6035654607615870287 HTTP/
    1.1" 200 5
    10.51.0.200 - - [29/Sep/2006:16:33:13 +0100] "GET /bea_wls_internal/HTTPClntRecv/a.tun?connectionID=0&rand=8245112057388607005 HTTP/
    1.1" 200 5
    Notice the time delay in some of the messages.
    The following error appears in the WebLogic server log, however I've verified that all IP addresses referenced by the load balancer configuration match those in the WebLogic configuration:
    <29-Sep-2006 16:31:43 o'clock IST> <Error> <RJVM> <BEA-000572> <The server rejected a connection attempt JVMMessage from: '266014296
    868812899C:25.2.1.210R:2462711729186814398S:10.51.0.2:[8113,8113,8114,8114,8113,8114,-1,0,0]:10.51.0.1:8103,10.51.0.1:8105,10.51.0.1
    :8107,10.51.0.2:8109,10.51.0.2:8111,10.51.0.2:8113:risIntCluster01:ms06' to: '0S:10.51.0.200:[-1,-1,-1,8143,-1,-1,-1,-1,-1]' cmd: 'C
    MD_IDENTIFY_REQUEST', QOS: '102', responseId: '0', invokableId: '0', flags: 'JVMIDs Sent, TX Context Not Sent', abbrev offset: '228'
    probably due to an incorrect firewall configuration or admin command.>
    When a JNDI lookup is made directly to a WebLogic server on the https port, the client gives the following output:
    Getting Initial context from ms01
    <29-Sep-2006 16:29:22 o'clock IST> <Debug> <TLS> <000000> <SSL/Domestic license found>
    <29-Sep-2006 16:29:22 o'clock IST> <Debug> <TLS> <000000> <Not in server, Certicom SSL license found>
    <29-Sep-2006 16:29:23 o'clock IST> <Debug> <TLS> <000000> <SSL Session TTL :90000>
    <29-Sep-2006 16:29:23 o'clock IST> <Debug> <TLS> <000000> <Trusted CA keystore: D:/eclipse/workspace/LoadBalancerTest/ssl/keystores/cssKeySt
    ore.keystore>
    <29-Sep-2006 16:29:23 o'clock IST> <Debug> <TLS> <000000> <Filtering JSSE SSLSocket>
    <29-Sep-2006 16:29:23 o'clock IST> <Debug> <TLS> <000000> <SSLIOContextTable.addContext(ctx): 7860099>
    <29-Sep-2006 16:29:23 o'clock IST> <Debug> <TLS> <000000> <SSLSocket will NOT be Muxing>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <write SSL_20_RECORD>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <32915800 received HANDSHAKE>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHello>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <32915800 received HANDSHAKE>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Certificate>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <validationCallback: validateErr = 0>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> < cert[0] = [
    Version: V3
    Subject: CN=10.52.0.3, OU=Revenue Integration Server, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    ac47cae5 45e55fe4 8ec06362 84aab923 af35d7f1 8b7e8aaa 32772d8a d8185106
    0ba91363 07162207 6eaa33b4 db8a3fbb 1e228e93 841ff322 e319242a 04ae7447
    Validity: [From: Mon May 31 16:45:21 BST 2004,
                   To: Thu May 29 16:45:21 BST 2014]
    Issuer: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    SerialNumber: [    05]
    Certificate Extensions: 4
    [1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
    Extension unknown: DER encoded OCTET string =
    0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
    0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
    0020: 65 e
    [2]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: D7 B3 92 7B C7 4E 2F 5D F3 97 CB 3B F9 FB 0A 1E .....N/]...;....
    0010: 97 C5 DD F1 ....
    [3]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE]
    SerialNumber: [    00]
    [4]: ObjectId: 2.5.29.19 Criticality=false
    BasicConstraints:[
    CA:false
    PathLen: undefined
    Algorithm: [MD5withRSA]
    Signature:
    0000: 57 B6 54 4E 1A 54 91 66 5C A8 FE AF B6 50 AB 23 W.TN.T.f\....P.#
    0010: 6A 32 42 77 06 44 D5 7D 40 81 E4 DD 84 E3 7B 55 [email protected]
    0020: 96 A6 BC E9 E9 51 96 B9 E4 01 56 F9 41 B7 0C C3 .....Q....V.A...
    0030: 0A 92 C0 17 6E 6B 9D D6 9A 87 6D 6E 15 5A 86 F4 ....nk....mn.Z..
    ]>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> < cert[1] = [
    Version: V3
    Subject: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    bc61b29f a830c97a 7a76883e 1665a241 a68b891f 8e4167eb 62e578ac 9e342c3e
    53c9de8b e756634b e364010f 4d36c1c5 21a65b37 b64b4861 6f4dda29 b932191f
    Validity: [From: Mon May 31 15:22:15 BST 2004,
                   To: Thu May 29 15:22:15 BST 2014]
    Issuer: CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE
    SerialNumber: [    00]
    Certificate Extensions: 3
    [1]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [2]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: D2 66 DD FC 06 C2 BC 7E 18 D5 64 38 AD 6E D0 0A .f........d8.n..
    0010: AA 97 05 0D ....
    [CN=Revenue CA, OU=Revenue Certificate Authority, O=Office Of The Revenue Commissioners, L=Dublin, ST=Dublin, C=IE]
    SerialNumber: [    00]
    [3]: ObjectId: 2.5.29.19 Criticality=true
    BasicConstraints:[
    CA:true
    PathLen:2147483647
    Algorithm: [MD5withRSA]
    Signature:
    0000: 3C 64 7C 9E 0B 90 48 9D 70 74 06 80 7F 2C AF 73 <d....H.pt...,.s
    0010: 92 1C C3 39 DD C3 45 B6 A4 8E 11 27 8E 21 18 4B ...9..E....'.!.K
    0020: FD AA 31 5E 35 FC DF 9E 70 42 F4 65 5C DF 56 9A ..1^5...pB.e\.V.
    0030: DD 8C 6B B7 3B BE E5 A7 D5 4A 16 23 C1 91 07 CA ..k.;....J.#....
    ]>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <SSLTrustValidator returns: 0>
    <29-Sep-2006 16:29:24 o'clock IST> <Debug> <TLS> <000000> <Trust status (0): NONE>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <Performing hostname validation checks: 10.51.0.1>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 received HANDSHAKE>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: ServerHelloDone>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 70>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <write CHANGE_CIPHER_SPEC, offset = 0, length = 1>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <write HANDSHAKE, offset = 0, length = 16>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 received CHANGE_CIPHER_SPEC>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 received HANDSHAKE>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: Finished>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 0>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <write APPLICATION_DATA, offset = 0, length = 270>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <30340343 read(offset=0, length=2048)>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <isMuxerActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <SSLFilter.isActivated: false>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TLS> <000000> <32915800 SSL3/TLS MAC>
    <29-Sep-2006 16:29:28 o'clock IST> <Debug> <TL

    You will need an AAM set with the internal (http) address.
    http://blogs.msdn.com/b/ajithas/archive/2009/09/11/alternate-access-mapping-in-reverse-proxy-configuration.aspx
    Dimitri Ayrapetov (MCSE: SharePoint)

Maybe you are looking for

  • Why does iTunes pause when I use Shopkick?

    I like to listen to iTunes and use Shopkick at the same time, but apparently I can't.  I've checked all the settings and even turning off the sound on the Shopkick app doesn't prevent iTunes from pausing the music whenever I open up Shopkick.  What's

  • Downgrade Lion back to Snow Leopard

    I have a 3 month old macBook Pro - which came with Snow leopard (I have the original Snow Leopard install disc) I have installed Lion but want to revert back to Snow Leopard but Snow Laeoprd install app won't work under Lion using the DVD as yet ther

  • How can I create cd from IPhoto pictures

    How can I create a cd from my IPhoto pictures?

  • Spry menubar submenu horizontal instead of vertical

    I have spent two days trying to figure out why the submenu on my spry menubar goes horizontal instead of vertical.  I have watched youtube videos and all the tutorials automatically have them going vertical under each other.  My submenu bar goes left

  • What are best practices for rolling out cluster upgrade?

    Hello, I am looking for your input on the approaches to implement Production RAC upgrade without having a spare instance of RAC servers. We have a 2-node database RAC 11.1 on Production. We are planning to upgrade to 11.2 but only have a single datab