Has anyone ealse had such a terrable time with Hp support on the Michel Batian watches?

I recieved my watch on Monday  the 1st of December.  I could not get it to charge or turn on.  So on the second I called there tech support at around 7:30 AM.  They treated me terrable.  I was told they would have to take the matter up with there panel.  What panel?  either the charger is bad or the watch is bad or both.  Don't give the consumer such a hard time with this just send out what they figure the bad part is.  So I called a second time around noon or so.  They treated me aven worse. So I hung up  I called around 4:30 PM and the support yelled at me and would not stop taking untill I had to yell at him to shut up and listen to what I had to say.  All I wanted to know if the panel had gotten to geather yet and if they had decided to send me the charger for my watch.  He said he would check.  Yes he said they would be shipped to me and an email would be sent to me to let me know when it was shipped so I could sheck on the shipping number.  So far nothing.  How long does it take to get a message to there shipper, and to get it shipped out?  I mean I had to spend $370.99 on the watch, and I don't want to be sitting here with something I can't use.  Sorry for this but I am just venting.  But then again a poor excuse on how to run a business.

I’d suggest uninstalling:
Blackberry software
the cycling74 driver
Any HP “utilities” (regarding the HP IO. Apple told developers to stop using Startup Items back in 10.3.)
any Adobe software you have (the “not loaded” ones are not loading because they’re incompatible.
the com.apple.CSConfig one.
facebook
google keystone agent
Unfortunately you have a lot of very questionable old, incompatible, and probably bad software on your Mac that is not playing well with Mavericks.  Some of these can be difficult to uninstall, particularly if you are not familiar with poking around in Mac system folders.
You might consider cutting to the chase and doing a clean install:
backup your documents and passwords, network settings, etc.
Completely erase your hard drive
Reinstall mavericks and your apps from scratch (not from backups)
and finally replacing your documents.
It can be a good thing. Spring cleaning. If you want to go this route, let me know, I can give you some more detailed suggestions for how to do it. The advantage is you can get Mavericks running really fast and reliably, and then be more selective about what you reinstall. A lot of the stuff you have on there is probably from apps you don't even use anymore (like for your Blackberry), or that really aren't necessary.

Similar Messages

  • Has anyone else had a screen separation problem with the ipad?

    Has anyone else had a screen separation problem with the ipad?

    Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
    Regards.

  • TS2634 has anyone else had problems displaying playing movies with the Apple Digital AV adapter

    Bought the Apple Digital AV Adapter for my I-pad 3. When I coonect it to the Ipad and my HD TV to play a movie, (even rented movies from Apple), I get an error message that says that the content is protected and cannot be displyed on my device. Has anyone else had this problemn or know of a way to resolve the issue?

    You're pobably seeing a copy protection (HDCP) related problem.
    Check this out -> iOS: About Apple AV Adapter compatibility
    HDCP requirements
    iTunes Store movies (SD and HD) and TV shows (HD) require an HDCP digital connection such as the one provided when using the Apple Digital AV Adapter and HDMI cable. If you attempt to play this content using a non-HDCP digital connection, such as the Apple VGA Adapter, an alert will appear to let you know that an HDCP-compatible device is required. To view iTunes Store content using a non-HDCP digital connection, do one of the following:
    Sync the SD version of the TV show
    Use an Apple Component AV cable to play the HD version at 480p
    Use an Apple Composite AV cable to play the HD version at 480i
    Attempting to play rental content on a device that requires an HDCP digital connection may start the rental timer. Use one of the recommended Apple AV cables to view your rental before the time limit expires.

  • Why is ios5 detroying my life? i have NEVER had such a frustrating time with an apple product. its getting to the point where im about to run everything over.

    ios5: great concept. HORRIBLY executed. i KNOW im not the only one having tons of trouble with this.
    before, i had a large amount of grey songs, comapred to black songs in my music app (i have a 64gb 4th gen ipod touch.) for those of you who dont know what im talking about, the grey songs are unplayable, where as the black songs are. they all play on my itunes. there are no "!" next to them.
    NOW, i cant even sync songs, it seems.
    i CANT back-up/restore my ipod. i have 10gb of room left on my computer. more than enough to do both of these.
    my mom is having trouble with her iphone as well.
    this is almost becoming a deal breaker. i REALLY hope apple has a patch or something for all of this coming out very soon.
    not looking for apple snobs to tell me that i should go back to using other windows oriented devices or to tell me that i didn't follow instructions properly. apple products are made for easy use, and i did the same as i used to with previous OS's.
    if you can help me, please do so. i will leave this open in a tab on my browser.

    well i restarted my ipod, and now songs are showing up...for whatever reason.
    there are still a lot of grey songs though.

  • How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    Hello Arthur,
    Thank you for the reply.
    You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
    The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
    Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and  i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD ,  pen and paper and CDs .
    Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
    I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
    Thanks
    Amanda

  • Unable to open my Nemo's reef for last 4days. Has anyone else had this problem

    Unable to open my Nemo's reef for last 4days. Has anyone else had this problem. It seemed to occur after the last content download

    I too have been unable to open Nemo's Reef properly since January 31 2014. I have used it without problems since August 2013. I recall it self updated around midday and then ever since it's failed to get beyond the opening page of what's in the reef. If I tap the back button it goes back to the iPad screen of apps. If I tap to buy a suggested plant it also disappears from the screen. However I have managed to collect my pearl gifts/sand dollars daily on that initial screen.
    I just cannot buy a plant or get out of this screen without the crash. Just going nowhere.
    Rather frustrating at level 37 and about £80 overall spent in pearls to build the reef and get beautiful fish whilst recovering from surgery past six months. I have found the game very calming. I've really enjoyed this game which past level 8 is surely intended for adults and more strategic play.
    This morning I switched on and there was instead a full screen advert. I hit the x button and it just crashed again. Now it shows my own reef on loading, but instantly crashes even faster.
    Is this an iPad problem or an apple problem. From an Apple point of view FWIW I have noticed my screen gets very hot when playing games such as Bejewelled Blitz too.
    It would be good to know if others have this nemo or/ and overheating iPad problem too. What is the solution?

  • McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?

    McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?  I contacted McAfee support and they said nobody else is reporting this issue.

    Wow, life is certainly tough for you.
    S***t happens.  That's why there's a warranty.

  • I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    Given the complexity in merely getting the thing open, that is likely. Or they forgot to reconnect it. See #14  and from #52 on down in: http://www.ifixit.com/Guide/Installing+iPad+2+GSM+Bluetooth-Wi-Fi+Antenna/6166/1

  • Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Hey Marco'96,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/HT201343
    Thanks,
    Matt M.

  • New iMac user.  My mouse doesn't seem to work properly on websites.  I just want to be able to click and have it do whatever I've clicked on automatically, for example "print" or "open link".  Has anyone else had problems with their mouse?

    Has anyone else had problems getting used to their mouse and how the clicks work or don't work on the internet?  I click and it doesn't automatically do what I click on.  So frustrating!

    Hi ndearborn0273!
    This is most likely just a settings issue with your mouse that you are able to change through the System Preferences. I have an article for you that can help you set this back to default, and that article can be found right here:
    Mac Basics: Set your preferences
    http://support.apple.com/kb/ht2490
    Specifically, you will want to pay close attention to this section of that article:
    Customize your mouse
    The Mouse preferences pane looks different depending on what kind of mouse you use. These settings let you set the sensitivity of the mouse to control how fast the pointer moves across your screen when you move your mouse, and adjust for your double-click reflexes. Other controls may be available, depending on the type of mouse you're using.
    Open System Preferences.
    Choose View > Mouse, or simply click Mouse.
    To control how fast the pointer (cursor) moves across your screen when you move the mouse, click Point & Click and use the Tracking slider to adjust speed.
    If Double-Click Speed appears, you can use the Double-Click slider to adjust speed.
    If your mouse has a scroll wheel, you can use the Scrolling slider to adjust speed.
    To change gesture settings, click the More Gestures tab. You can enable and disable gestures for swipe and Mission Control.
    Judging by your post, I believe your secondary click setting is set to use the left side of the mouse. The default set up for a former Windows user to be most comfortable would be having the secondary click set to the right side of the mouse, as is shown in the picture I have inserted above. Note that these settings will be explained by the little video on the right hand side of this window as you hover over the description of the action on the left hand side.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Since downloading ios 6 my iPhone 4 will not play itunes when docked - plays ok when not on dock.  Has anyone else had this problem?

    Since downloading ios 6 my iPhone 4 will not play itunes when docked - plays ok when not on dock.  Has anyone else had this problem?

    At least I'm not the only one with the issue. I was looking it up so see if others had the same problem and found a bunch of posts about it. I'm assuming it's not the phone then, it's the software. Should I bring it to the Apple Store? Replacing the phone seems stupid, because the phone isn't really the problem. It's the software! Maybe the iOS 5.0.2 will fix it???  I don't really want to wait though, it's a pain. If a lot of people have this issue it should get Apple's attention. They need to do something to fix it, ASAP!

  • I've factory reset my iPhone twice, about to be three times. has anyone else had issues that force them to factory reset their phones.

    So I got my iPhone 6 on the day it came out and it has been the most frustrating experience I've ever had with apple.  I've had to factory reset my phone twice, probably about to be three times once i get home from work.  The first time was trying to transfer my stuff from my old iPhone and right after it finished my iPhone 6 turned itself off then turned on to the boot up screen (the one with the apple logo) and then shut off then did the same thing.  this forced my to factory reset my new iphone literally the day i got it.  The next day i was trying to upload my music and basically the same thing happened again, forcing me to reset my phone for a second time.  Just now (its been two weeks that I've owned my new phone)i tried to get on twitter and the app crashed then my phone reset itself and when it loaded to the unlock screen, instead of my background it was just a black screen with the time and the unlock slide.  when i unlocked it, it went back to the normal background and the main screen.  Because whenever i would turn off (not power off, but put it to sleep) the phone and turn it back on it would do the same thing.  I decided to restart it (actually turn it completely off and then back on) and now it will show the boot up screen then turn off.  I understand that there is the solution of factory resetting my iPhone, but 3 times in 2 weeks is pretty unacceptable, seeing as i had a 4s for almost 3 years and never once had to factory reset it and its also incredibly annoying to have to redownload all of my stuff.  Has anyone else had this problem? is there anyway i can keep this from continuing to happen?  is it a software issue or is it the phone itself that is messing up?

    WiseJD, thank you for your suggestions.  Well the first two restorations were the first and second day (9/19 and 9/20) that i had my 6 and both times i chose to restore is as new.  since then there haven't been any issues until now.  granted the first time my phone messed up was after i used the At&t transfer app which made me think it couldve been something that corrupted my device.  the second time though started with me attempting to download music from the itunes store app on the phone.  for whatever reason it would download but not but it wouldnt process and install the music.  Then i tried to download it from my computer and thats when the second screw up occurred. that time i dont think it was an issue of my phone being corrupted because it was already acting strangely before i ever plugged it into my computer.  This third time, i'm at work so i havent been able to do anything about it, i wasnt downloading anything and my phone was not hooked up to a computer, i simply tried to open twitter and then all this happened. and it has been a solid almost two weeks without incident which makes me think its my phone and not corrupt files.  also looking at forums, not just these but other online, i haven't really seen anyone with the same problem which adds to my thought that its a problem with my phone. 
    Just to be clear, the first time this happened, the iphone would display the boot up screen then shut off then turn on and display the boot up screen, then shut of and kept going on like that until i put my iphone into recovery mode and factory reset it.  the second time the iphone would display the boot up screen and then shut off, but wouldnt turn on unless i pressed the power button again.  this third time is the same story.  i dont know if this makes a difference or if its symptomatic of different problems but i figured it wouldnt hurt to explain in detail the issues that happened each separate time.
    Also on a side note, i havent done anything like jailbreak it, mess with it download or any third party apps not on the app store.

  • HT1222 Every time I try to install an update for iTunes 11.0.2, I get an error message 103.  Has anyone else had this problem and found a way to fix this?

    Every time I try to install an update for iTunes 11.0.2, I get an error message 103.  Has anyone else had this problem and found a way to fix this?

    I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
    You need to backup your computer then uninstall I-tunes and reinstall itunes.
    Delete iTunes
    Deleting iTunes is not recommended unless you know what you’re doing.
    Launch Terminal from the UTILITIES within Applications
    Type the following commands:
    cd /Applications/
    This brings you into the Applications directory, the next command deletes iTunes itself:
    sudo rm -rf iTunes.app/
    Enter the Administrator password to confirm
    There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
    Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
    You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
    http://www.apple.com/itunes/download/

  • I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Has anyone else had this problem Viewsonic 19" VA912b "Out of Range"

    I bought 2 new Viewsonic VA912b 19" flat panel monitors and found that when I tried to boot the computer from a CD (both a G4 and G5) running OX10.3.9, the screen would go black then display the message "out of range" then go totally black. The only way to restart was by holding in the button on the computer. I called Viewsonic twice and each time they said they had never heard of such a thing and suggested I try the screens on a Windows machine. That made no sense to me.
    Has anyone else had this problem and has anyone found a workaround?
    I really like the screen, but want to be able to repair permission and optimize the harddrive from time to time.

    You should still be able to boot into the Open Firmware screen
    command + option + o + f
    make any changes necessary to screen geometry using onscreen tools to get it centered etc.
    and then, type:
    reset-nvram
    set-defaults
    reset-all
    I would then, on the reboot which will occur, boot into single user mode, and run "fsck -fy" on the drive - anytime you do a hard reset reboot you very likely will result in corrupt directory and filesystem.
    Applejack would be nice to dump cache folders, swap files, check for corrupt or damaged prefs. And you probably do want/need to delete any .plist the deals with displays.
    Might also want to rerun the combo updater (10.4.6) as well.
    I have G90f-2 and VE800 and really like both. The G90 can run up to 1600x1200 @ 85Hz? and almost everything below that resolution. The VE is a nice 18" LCD too.

Maybe you are looking for

  • Deploying a JSP file

    Hello, I am currently trying to deploy a jsp file on the application server from NWDS. But unfortunatelly I didn't manage to make it work yet. If anybody could provide a step by step howto that would be great, I am not very familiar with the deployme

  • Passing UNIX command in SQL Script

    Hi, I am writing a sql-script in unix. The logic is as below: SELECT flag FROM dummy_table; If flag = Y Then cp ./abc.txt $HOME/abc.txt Else SELECT id, roll FROM employees; Please help me out. Thanks and Regards, Tony

  • How do I create a favicon in Photoshop Elements 10?

    How do I create a favicon in Photoshop Elements 10?

  • Automating scrolling of a JTable when model gets updated

    Hi, I have a JTable in a JScrollPane with a table model that updates in real time and I need to keep the currently selected row on the same place on screen (for example when a row is inserted before the selected row I'd like the scroll pane to automa

  • Oracle SQL Developer - File, Open , File Name Not Accept UNC Path Form

    In Oracle SQL Developer, at least the File, Open (Dialog's), the File Name (if not all File / Directory Name) Text Box(es) is (are) not accepting, at least for me, the UNC Path Form of Folders on Network Servers. The same UNC Path (or UNC Paths in ge