Has anyone else overclocked an Emac with ATI Graphics
I ran accross this the link below when researching if my Emac 800 w/ ATI graphics can be overclocked:
http://www.lbodnar.dsl.pipex.com/eMac/eMac-upgrade.html
This person made it sound pretty easy and the thought was that this processor was actually underclocked by Apple in it's 800 MHZ version at the time, and could be run without overheating up to 1.33GHZ or higher. I however, could not make a lot of sense of how the soldered jumpers are laid out in the pictures and am not very experienced at soldering, so I am not racing off to pull the motherboard out of my Emac to do this mod. It seems like a great concept that a major speed increase could be had with just a couple of hours with a stready hand, a decent soldering gun, and some know-how of what you are doing.
Has anyone else tried this in the 5 years since this article was posted, as it seems like it would be a great upgrade?
Steve
Actually mine predates the eMAc s with the capacitors issues (the USB 2.0 models).
I just though it was interesting that there were all these people teying that upgrade 5 years ago but no one has posted anything online about it since.
Makes you wonder if most of those overclocked systems self destructed after 6 months.
The only way I'd probably try it is if I located a cheap 800 MHZ system board somewhere and felt more confident about soldering in the first place (therefore I'd only be out my investment in the extra board if it didn't work).
I was wondering if anyone else had done this mod in the past several years.
Similar Messages
-
Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?only $99, i thought it was closer to $175.
-
has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.
fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved. -
Has anyone else been having trouble with the tom tom app?
Has anyone else been having trouble with the tom tom app?
Not me.
Would you like to define a problem? You need to ask a better question . -
Has anyone else been having trouble with safari ever since the update? I have restarted several times, it still doesn't work.
Greetings Blueleoapple,
After reading your post, it sounds like you are experiencing an error with Safari. You may want to consider resetting your device, which is different from restarting. This article provides detailed instructions for Restarting, and Reseting:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
How to restart
Press and hold the Sleep/Wake button until the red slider appears.
Drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?
1st... make sure nothing's covering/smudging the camera lens. then...
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove the Camera app from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Camera app from this list.
- Press the home button twice when done.
- Restart the Camera app
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
Has anyone else had a problem with obtaining funds for replacement hard drive?, I have had difficulties obtaining replies as the funds appear to have gone astray and Apple aren't prepared to give me their bank details so my bank can try and locate them?
Might thry this if you are in N. America. It is a escalated level of support:
Apple Customer Relations 1-800-767-2775 -
EOS 7D Mark II - Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?
Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?
Is the lensora report based on actual testing... or merely theoretical?
I'm wondering ... because there's a well-established history of 3rd party lenses that should be compatible based on the mount, but have problems anyway when a new camera model is introduced that did not exist when the lens was designed.
At the same time, if you contact the lens vendor for support, they may be able to provide better data and sometimes they can re-chip or re-flash firmware into the lens to upgrade it to a compatible state.
Tim Campbell
5D II, 5D III, 60Da -
Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!
Hannahjadepurnell wrote:
From giffgaff.
i Don't actually mean when you put it In the phone. I mean when you try to take the slot out of the phone with the pin. As soon as I pulled it out it bent.
That makes less sense as the sim tray a fairly stiff metal and should be pulled straight out once released. You didn't answer the question about where is was bought. Is is a real iPhone? -
Has anyone else noticed this bug with multitasking gestures on iOS 5?
I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures.
If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close. What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher. It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on.
If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature. Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work).
Has anyone else noticed this, or can anyone else reproduce the bug as I described? I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end. Thanks in advance.02-May-200702:03 PM
scoobyman wrote:
Hi keffa
After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
http://www.nokia.co.uk/A4222231
This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
Useful links: Phone firmware update | Nokia support site -
Has anyone else had this problem with the iphone 4 dock and bumper?
I purchased an iphone 4 dock and bumper but when ever I sit the iphone in the dock with the bumper on it won't get a sufficient enough connection to charge so I have to take the bumper off in order for it to charge.
Has anyone else had this problem?Yes I am not impressed with that either. How can apple design such an accessory and then not have it compatable with another accessory of theirs!?
The same goes for the in-car charger also. It's a good job the iphone 4 is so good, otherwise it would have been a return to Blackberry for me! -
Has anyone else had a problem with downloading OSX Mountain Lion? It doesn't recognize my server!
I downloaded Mountain Lion on my MacBook and now it does not recognize my server. Has anyone else had this problem or know how to resolve it?
What a terrible coincidence, nick70! I can assure that most updates go smoothly. I'm sorry to hear that yours didn't. If you're unable to power your device back on, we may need to get a replacement device out to you. Please follow/DM me ( Chauncey_VZW ) with your contact information, and I'd be happy to resolve this for you! I look forward to hearing back from you.
ChaunceyM_VZW
Follow us on twitter @VZWSupport -
I only have my IPhone5 for two months and am very upset that now they may need to give me a new phone and lose anything that may not have been recently backed up by the phone. Has anyone else had this problem? How did you reseolve it? Hard reboots did not help.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Has anyone else seen this behavior with MobileMe since iOS4?
First some explanation. I have two different push mail accounts on my iPhone. A MobileMe account and an Exchange account. They are both receiving push mail, calendar entries, and contacts.
Now, on the Exchange account, when I receive a message, the new message badge shows up on the iPhone. This is good, and the expected behavior. If I then go and read and / or delete that message in say Outlook or through Outlook Web Access, the message status also updates on the iPhone nearly instantaneously, again this is the expected and desired behavior. Any changes made in mail are also pushed to the iPhone in the background and in very short order.
Now, the MobileMe account is NOT doing this. Sure, when I get a new message, that message is placed on the iPhone and the badge is updated. However, if I then read and / or delete that message while using say the MobileMe Web App or the mail application on my Mac, that change is never reflected on the iPhone. So the badge never changes and the messages are not changed or removed from the device. This is NOT the desired behavior, and not what I remember pre iOS 4. It is not until I open the mail app on the iPhone that the inbox finally updates to reflect the changes made in the inbox or other folders.
So, has anyone else noticed this? Can someone else test this to see if they too are having this issue. I tried to report it to MobileMe support, but only got the standard script. The tech tried to help, but was not able to tell me what was going on or could not understand what I was trying to tell him. I suspect this is an issue on either the sync servers for MobileMe or the mail servers for MobileMe or both.
Message was edited by: Richard WesselsYou might get a better response if you ask in the dedicated *MobileMe on iPhone and iPod Touch > MobileMe Mail* forum, as that is where people who are using MobileMe are most likely to see posts relating to it.
http://discussions.apple.com/forum.jspa?forumID=1198 -
RAM: Has anyone else had good luck with Corsair?
First of all, thanks Bas and Scottg26 for pointing out the correct version of Memtest86+.
I know that Corsair has a crappy rep around this forum when it comes to the Athlon 64. However, I've had nothing but good luck so far (knock on wood). I've been up and running for almost a month now with no BSODs and the computer has booted every time so far. I'm using Corsair TwinX 1024 LL in slots 1 and 2 with the speed settings on Auto in the BIOS with a voltage of 2.6. I've run Prime95 for up to 10 hours or so with no errors and I just ran one pass of Memtest86+ v1.00 with no errors. It took 18:50 and showed the following settings:
Memory: 1024M 1447MB/S
Settings: RAM: 200Mhz(DDR 400) / CAS:2-3-2-6 / Single Channel (64 Bits)
However, I will point out that the only real world test it's really passed so far is playing Call of Duty.
Here's a link to the actual RAM on NewEgg: http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-435&catalog=147&manufactory=BROWSE&depa=1
Is anyone else happy with their Corsair RAM so far or did I just get extremely lucky?Quote
Originally posted by amxandy
I read the horrible reviews for Corsair on this forum after placing my order for a stick of Corsair CMX512-3200C2PRO memory (I couldn't resist the activity lights). I have had no problems running at specified memory timings. I have always had good luck with Corsair and will continue to use them.
Yeah They are neat at that. Question is how well do they overclock?
I'm getting a 28Mhz fsb overclock out of these dimms that I have and They are used I admit, But like the seller said they are great overclockers!
Maybe you are looking for
-
Exported film has ghost like effect on it
Final Cut Pro X I've had this problem once before but I haven't found out how it's caused or how to prevent it. I exported the film using Source - Apple ProRes 422 When I watched the film every time the person moved fast their outline doubled and was
-
How to log off a single AD user from a list of servers
I have a user account I need to logoff from all servers in a list. For example domain\user2 needs to be logged off all servers in a list. Here is what I have so far: foreach ($_ in get-content C:/servers.txt) {(gwmi win32_operatingsystem -ComputerN
-
Color for a Field in alv output
Hi All, I use a field in the ALV grid output which needs to display color (red or green) depending on certain validations. Please tell me how to display color for this field. The program uses oops. Thanks.
-
Hi all, the old post was http://forums.adobe.com/thread/662903 The Include Metadata option in Save For Web... saves the info found in File > File Info with the image. No resolution data. This has zero effect on the image. Image resolution only affect
-
Hi All, I am trying to create a system to connect my portal to the R/3 backend to execute business package. All the entries goes well like system name,system alias,ITS nae etc. When I click the personalize link to map my user id for the sytem created