Has anyone else seen the my location is miles out on iOS 7?
Is there a way to fix this?
I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.
Similar Messages
-
Has anyone else seen the "SharePoint is not supported with version 4.0.30319.18051" messages?
We are running SP 2010 service pack 2.
We are seeing the following messages on at least one of our farm machines. I was wondering whether others here have seen these messages and found a solution. The powershell ise was a running task, but not actually executing any code, etc.
When code was tried with it, the code appeared to be working as far as I could tell.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C) 0x15EC SharePoint Foundation
Topology d04h Monitorable Microsoft SharePoint is not supported with version
4.0.30319.18051 of the Microsoft .Net Runtime.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C) 0x15EC SharePoint Foundation
Topology 888j Medium System.PlatformNotSupportedException:
Microsoft SharePoint is not supported with version 4.0.30319.18051 of the Microsoft .Net Runtime. at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Farm() at Microsoft.SharePoint.Administration.SPConfigurationDatabase.SPFileSystemCacheWatcher.OnChanged(Object
source, FileSystemEventArgs e)that appears to be doing the trick. I really appreciate your help.
It is weird - all that the kb recommends is changing the command line -version from "-version 2" to "-version 2.0". -
I think the question and following details are enough information. I don't have anything more to say!
I have not observed any noticeable change on my systems but given Mavericks' dramatically improved RAM memory management, it is entirely possbile that a big chunk of what you are seeing is from reduced swapfile and cache file requirements. I suspect it will take a while before many (any?) of us comprehend the full impact of the changes.
-
Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?
The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth -
After updating to iOS 5.0 on my iPad2, my contacts updated in name only, the information (addresses, phones, etc.) is blank. Has anyone else seen this? The cloud has all the contact information intact.
No, no replies yet. Fortunately, I have all my contacts backed-up on Google. I haven't lost the data, just need to merge into my iPad contacts. Good luck with your call to Apple.
-
Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?
Hi
"Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
"Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
http://support.apple.com/kb/HT1822
HTH?
Tony -
I understand there have been outages. I was unable to sign into iTunes but within the last 5 minutes I was able to sign in- but not download apps. Has anyone else seen improvements in regards to the outages?
Yeah...in United States...everything is back up...but still a little creaky and slow.
-
Quite a few banks encourage customers to install Trusteer Rapport in order to enhance online security. My wife and I have had very different experiences using it, and I uninstalled it in 2011. An Uninstall applet comes with the Rapport installation, because the installer tucks things into many corners of the file system.
Anyway, this month I found in Activity Monitor that rapportd was running and was hogging more than 50% of CPU time! I verified that this was indeed a piece of Rapport and that it had caused similar problems for other users under 10.5 and 10.6. The solution was to turn off Rapport. But I had supposedly uninstalled it.
My bank routed me to Trusteer support, which was plodding and unhelpful. The support tech seemed utterly mystified. So I re-ran "Uninstall Rapport.app" which was still located in /Applications/Rapport (the only item in the folder). That seems to have taken care of the problem. I found that rapportd is supposed to live at /Library/Rapport/bin/rapportd and I verified that it is not there.
Has anyone else seen something like this? Has it peristed under 10.7?Yes I have had problems w/ Insignia...(See post on defective TV) to say the least I would not purchase another one. After numerous service calls to the cable company, geek squad and complaints to the corporate office and BBB finally, the problem is being corrected. I will be picking up my new TV tomorrow and I pray I dont have to do through anything else with a Insignia product. The sad part is Best Buy was not going to replace the TV until they received my complaint from BBB. That is when I started to receive phone calls from everyone stating how sorry they were for all the problems I have had. I purchased the extended warranty when I purchased the tv and I will make sure that my warrantly is extended to the new TV I will pick up tomorrow. I wish you the best of luck, because I know exactly what you are going through.....
-
Has anyone else seen itunes error -1202? Cannot connect to itunes?? Help.
Has anyone else seen itunes error -1202? Cannot connect to itunes?? Help.
Uninstall iTunes, and go to http://support.apple.com/kb/DL1577 and get the 64 bit version.
-
Has anyone else experienced the stopping and starting again whil playing music in itunes. It was working fine wit the prior fix, but after the last update
it started skipping again.Try it in another vehicle see if it still happens, at least you can narrow it down to your phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!
-
Has anyone else had the issue of losing theYouTube app on the original IPhone after updating to 4.3.5? (The Restrictions is turned as OFF)
The Youtube app is now cleaned away from the IOS 4.3.5
Any help would be appreciated.This still doesn't make sense. The iPhone 4 may have come with a number of different versions of iOS out of the box depending on when it was purchased and how long it had sat on the shelf.
If you can't find it, check restrictions and make sure you haven't locked it out. -
has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!, has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!
*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old
If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod. -
Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi
and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.
Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?
Maybe you are looking for
-
How to exctract data from a report to use it in a process
Hi! I would like to know how to exctract data from a report to use it in a process. Let's say that I have a report which have following fields: id_person, name_person. And then, I want to make a process which introduce the id_person (from report) int
-
HP Color LaserJet CM2320fxi Multifunction Printer (CC435A)
i am interested about the named product....i am from india , west bengal , how should i buy this product vis hp shop....i am not interested to perchase it online....tell me the availibility of this model in my country.....what will be the price appro
-
Clarification on Patches applied after installing NCOMP
Clarification on Patches applied after installing NCOMP and reapplying patchset Note : 293658.1 10.1 or 10.2 Patchset Install Getting ORA-29558 JAccelerator (NCOMP) And ORA-06512 Extract: "Note: If you have one-off patches on top of a 10.1.0.x or 10.
-
hey friends need some help i am using the same pricing procedure for my sales order document and for Contracts. when i insert the condition type for price, the net value gets calculated for Sales order and the same doesn't happen when i am creating c
-
How to merge 2 vbscript program into 1
1st program code: Dim objShell Set objShell = WScript.CreateObject("WSCript.shell") objShell.run """C:\Program Files\Altiris\Altiris Agent\aexnsagent.exe"" /uninstall /qn" 2nd program code: strFolderName = "C:\Program Files\Altiris" Set fso = CreateO