Has anyone else seen this behavior with MobileMe since iOS4?

First some explanation. I have two different push mail accounts on my iPhone. A MobileMe account and an Exchange account. They are both receiving push mail, calendar entries, and contacts.
Now, on the Exchange account, when I receive a message, the new message badge shows up on the iPhone. This is good, and the expected behavior. If I then go and read and / or delete that message in say Outlook or through Outlook Web Access, the message status also updates on the iPhone nearly instantaneously, again this is the expected and desired behavior. Any changes made in mail are also pushed to the iPhone in the background and in very short order.
Now, the MobileMe account is NOT doing this. Sure, when I get a new message, that message is placed on the iPhone and the badge is updated. However, if I then read and / or delete that message while using say the MobileMe Web App or the mail application on my Mac, that change is never reflected on the iPhone. So the badge never changes and the messages are not changed or removed from the device. This is NOT the desired behavior, and not what I remember pre iOS 4. It is not until I open the mail app on the iPhone that the inbox finally updates to reflect the changes made in the inbox or other folders.
So, has anyone else noticed this? Can someone else test this to see if they too are having this issue. I tried to report it to MobileMe support, but only got the standard script. The tech tried to help, but was not able to tell me what was going on or could not understand what I was trying to tell him. I suspect this is an issue on either the sync servers for MobileMe or the mail servers for MobileMe or both.
Message was edited by: Richard Wessels

You might get a better response if you ask in the dedicated *MobileMe on iPhone and iPod Touch > MobileMe Mail* forum, as that is where people who are using MobileMe are most likely to see posts relating to it.
http://discussions.apple.com/forum.jspa?forumID=1198

Similar Messages

  • Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

    Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

    Hi
    "Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
    If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
    "Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
    http://support.apple.com/kb/HT1822
    HTH?
    Tony

  • After updating to IOs 5.0, my contacts updated in name only, not the information.  Has anyone else seen this?

    After updating to iOS 5.0 on my iPad2, my contacts updated in name only, the information (addresses, phones, etc.) is blank.  Has anyone else seen this?  The cloud has all the contact information intact. 

    No, no replies yet.  Fortunately, I have all my contacts backed-up on Google.  I haven't lost the data, just need to merge into my iPad contacts.  Good luck with your call to Apple.

  • Captivate 8:  Getting this message "Unable to locate LMS's API, content may not play properly".  Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false".  Has anyone else seen this?

    Captivate 8:  Getting this message "Unable to locate LMS's API, content may not play properly".  Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false".  I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser.  Please enable JavaScript, then relaunch the course."   JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this? 

    The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
    Not sure about the Javascript related issues.
    Sreekanth

  • HT4623 My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

    My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

    1st... make sure nothing's covering/smudging the camera lens.  then...
    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove the Camera app from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete the Camera app from this list.
    - Press the home button twice when done.
    - Restart the Camera app
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • Has anyone else noticed this bug with multitasking gestures on iOS 5?

    I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures. 
    If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close.  What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher.  It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on. 
    If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature.  Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work). 
    Has anyone else noticed this, or can anyone else reproduce the bug as I described?  I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end.  Thanks in advance. 

    02-May-200702:03 PM
    scoobyman wrote:
    Hi keffa
    After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
    http://www.nokia.co.uk/A4222231
    This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
    Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
    Useful links: Phone firmware update | Nokia support site

  • Has anyone else had this problem with the iphone 4 dock and bumper?

    I purchased an iphone 4 dock and bumper but when ever I sit the iphone in the dock with the bumper on it won't get a sufficient enough connection to charge so I have to take the bumper off in order for it to charge.
    Has anyone else had this problem?

    Yes I am not impressed with that either. How can apple design such an accessory and then not have it compatable with another accessory of theirs!?
    The same goes for the in-car charger also. It's a good job the iphone 4 is so good, otherwise it would have been a return to Blackberry for me!

  • Since installing the latest update of Photoshop CC two days ago, Auto Blend for focus stacking is selecting all pixels from the bottom layer instead of selecting the ones in best focus from each layer. Has anyone else seen this problem?

    I installed the latest update of Photoshop CC two days ago on my Macbook Pro, and now when I try to do focus stacking by opening multiple photos and doing Auto Align and Auto Blend, the blend selects the entire bottom layer instead of selecting the in-focus areas from each layer. I even tried again on a series of images where this worked a week ago and the problem occurs. I have Photoshop on a Windows 8 machine and did not apply this latest update and it works fine. Has anyone else encountered this?

    And since installing this same update, my Photoshop is crashing just after starting.
    Ashutosh.Nigam suggested me in this forum to change the permissions to SLStore & SLCache Folder, but it did not work.
    Ali from french Adobe support told me to delete my Settings files, but it was not enough.
    A girl with no name from the same team told me to update my video card driver, but you know I run the latest Mac OS X version and everything is updated, mademoiselle.
    Stephane sent me a link to a huge page of things to do :
    -  Troubleshoot account-specific fonts, but there wasn't any corrupted font
    - Delete account-specific Adobe cache files but... guess what...
    - Troubleshoot account-specific login items but... yes, that's it, I can see you understand me
    - Reset the access settings on the user account's Library folder... oh god, that was fun, I used the Terminal and sudo commands
    I did all of these things because when I tried to open PhCC in an other admin session, it worked, so that was an incompatibility between my session and PhCC. But, but, but, when I tried again to lauch the app in the second session, it worked fine but refused to quit. Ha ha ha.
    So you can try to delete your Settings files. I wish it'll work for you. If not you can try the long list above... or hope a better answer from the support.
    I didn't change anything but Photoshop on my session and they ensure that the bug is due to my session and not to their update. Strange affair.
    Good luck,
    JLuc

  • Has anyone else seen this dialog box graphical phenomenon?

    Hi,
    I'm running 10.5.4 on a MacBook Pro (4,1) and have noticed a strange effect on some dialog boxes in Leopard - darker grey blocks appear around text, controls and buttons within the dialog box. The effect occurs on both the MacBook Pro display and the Cinema Display it is connected to.
    See the following links for examples:
    http://www.flickr.com/photos/jammylammy/2732289268
    http://www.flickr.com/photos/jammylammy/2735071703
    http://www.flickr.com/photos/jammylammy/2738394376
    So far it appears in dialog boxes from Entourage, Photoshop & Illustrator (both CS2 & CS3) and iTunes. I initially thought it was only occuring in PowerPC apps running under Rosetta but iTunes is a native Intel app.
    Not all dialog boxes are affected - it doesn't appear in Safari, for example:
    http://www.flickr.com/photos/jammylammy/2735078907
    The boxes are still perfectly usable and it doesn't appear to be a monitor brightness issue as it occurs whatever the brightness setting. I wondered if it was related to the Nvidia graphics card issue (the Macbook Pro is fitted with a GeForce 8600M GT 512MB graphics card) but haven't been able to find any mention of this on these forums or through a wider Google search.
    Has anyone else come across this strange phenomenon?
    Thanks!
    John

    clintbradford wrote:
    ...strange phenomenon...
    Isn't this just a situation where some apps' code is written differently than others?
    It may well be yes. After more searching I found a similar thread here:
    http://discussions.apple.com/thread.jspa?messageID=7638343&#7638343
    It may well be something as simple as Apple changing the default background colour for dialog boxes slightly. What puzzles me about that explanation is that the 'effect' occurs in iTunes 7.7 which was released just weeks ago - whereas Leopard's been out in the wild since last October.

  • Has anyone else seen this strange (I think) problem?

    I'm running XP pro SP2 w/all updates. I installed 1.4.1 after first uninstalling 1.3. Everything seemed to work fine. The next day when I turned my computer on I received an error message that no DVD drives were found. I have two and neither showed up in windows explorer and both had exclamation marks in device manager. Preliminary troubleshooting revealed that both drives had power and there were no POST problems. I rebooted and entered the BIOS setup and noticed that both had been properly detected by the BIOS - windows appeared to be the only thing that couldn't find them.
    Rather than continue troubleshooting I decided to restore from an image backup to a condition where the drives were working OK since it seemed to be a windows issue. When I booted the computer the drives were again visible. I then installed 1.4.1 again and everything worked fine. The next day the error message came back after I turned the computer on. This time I uninstalled 1.4.1 without turning off the computer and the error message went away and the drives were once again visible.
    This seemed to me to pretty much point to 1.4.1 as the culprit but I have no idea why...I've never even seen this kind of error before and I've seen a *lot* of errors.
    Anyone else experience this kind of glitch or have any guesses regarding how 1.4.1 could cause my drives to go south?
    thanks for any feedback.

    You might get a better response if you ask in the dedicated *MobileMe on iPhone and iPod Touch > MobileMe Mail* forum, as that is where people who are using MobileMe are most likely to see posts relating to it.
    http://discussions.apple.com/forum.jspa?forumID=1198

  • Has anyone else seen this?

    I'm just setting up a new Mac Pro to use primarily for video editing. I'll be putting Final Cut Studio on it, but last night I just wanted to try the new iMovie and test a firewire camera. I'm not too happy with the quality I'm seeing using a Canon Elura 100. The video seems to have severe interlace problems in both iMovie and and Photo Booth. Any movement results in strong
    scan line fringing on all moving edges. I've never seen results like this on my iMac, so I'm assuming I shouldn't be seeing them here. I'm hoping there's a setting somewhere that needs changing, and it isn't a larger problem of a bad or incompatible video card or other hardware issues.
    I already had to take the cinema display back because of a dead pixel right in the center of the screen. I really don't want to have to seek out a similar fix for this interlacing. Is this a fixable issue anyone else has had, or did I make a major mistake choosing the 8800 GT card? I've heard of other issues with it.

    The article lost credibility on this line here:
    "What makes the Matrox MAX technology so special is that you don’t need  an 8 to 12 core, top-of-the-line system to get the performance benefits  of Mercury.  You can use your quad-core systems with any of Matrox’s MAX  devices and have the ability to accelerate the Mercury Playback Engine."
    First, that's not even close to indicating how the Mercury Playback Engine works or how the Matrox solution would help, nor is it true that you would otherwise need an 8 or 12 core top-of-the-line system in the first place. This is like one of those infomercials that creates a problem for you then attempts to help you solve the problem with their product.
    Or kind of like shark repellant for people who are landlocked.
    My opinion...if you're using a certified GPU and have a decent quad core system (or better) with a decent amount of RAM, you're getting the MPE goodness and won't likely see any ROI from purchasing additional Matrox hardware.

  • Has anyone else had this problem with their screen?

    This has happened to me twice, at random....................The background of the phone would go dark, and three bars approx 7 or 8 cm in width would appear running down the length of the phone.
    Background was a dark gray, the three bars were a darker gray almost black. 
    I called into Verizon just now and spoke to a CS rep and they transferred me to technical support.  They logged the problem, but I told them I didn't want to send my phone back, as they are on backorder already.
    Please let me know if you have had ANY problems or issues with your screen.  The lady in tech support said once Verizon has taken reports on any problem with -3- people, they send it onto Motorola for resolution.
    Thank you !!!!!!

    SavannahsMommy wrote:
    how long did your phone's screen stay looking like that?  Mine was only maybe 30 seconds and it jumped right back to normal.
    Will you please call Verizon and report the problem-they told me 2 more people and they would send to motorola for a fix.....
    The only problem I'm having now is the battery, I knew the life would be short, but give me a break......I started using my Droid X at around noon off and on and it is 2:25 here est and the battery indicator is on yellow already !!
    I installed the task killer but this is ridiculous.....
    I guess I should exchnage it because of the screen problem-I just knew the phones were on backorder and I didn't want to give it up yet, LOL......maybe the battery is defective too?  I do plan on buying an extended life battery to help out a bit.
    I bought online also. I exchanged at the store. Surprised they still had some left My battery life seemed ok.  But then again I didn't have it very long..

  • Latest version of Window 7 FireFox came with malware including Unico browser and tons of other malware. Mac version seems to be fine. Has anyone else seen this?

    I have been using FireFox for awhile now on both a Mac and Windows 7 computer and have loved it. It has been updated to the latest version by your request many times in both formats with no problems; until now. The Windows computer just asked me to undate to version. I went directly to Mozilla.org and it had 'Firefox Setup Stub 37.0.1.exe. When I opened this, I immediately got a blast of more nasty malware and viruses than I had ever previously experienced. I deleted all those unwanted programs that had downloaded; removed all the malware and viruses. Firefox worked for a minute before all this different malware and pop-ups and viruses started again. I then repeated everything and also removed firefox and the PC worked fine with a different browser.
    I then tried a second time to a different Mozilla site that included US firefox in the website name and started over. Same thing happened again. These unwanted programs included Unico Browser and dozens of other that are very nasty. If you click on anything, they download a dozen other programs. If you go to control panel and remove them, they download 6 or eight new unwanted programs. I finally got all the malware, viruses and pop ups removed when I also removed Mozilla Firefox. I can only conclude that the latest version for Windows is corrupted. Any thought or recommendations? For now, I am back to using a different browser on the PC.

    Let's try this last thing:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • My iPhone 5 only display the apple screen with text on the top (like a command prompt). Has anyone else seen this???

    I was checking my mail and suddenly i get the apple screen with text on the top (like a command prompt). It won't receive phone calls and it doesn't respond to anything. I tried to force shutdown, reset, etc and nothing happened... Now the screen changed to vertical gray lines. I'm attaching a picture of both screen displays. Someone please help!!!!!

    Try a reboot by holding both the power and ome buttons until the apple logo appears.  If that does not bring it back, take it to an Apple store genius bar and have the technicians test it.

  • HT204291 Airplay mirroring on my iPhone 4s has disappeared since updating to iOS6.1. Has anyone else seen this same problem?

    The mirror option seems to be missing since updating to iOS6.1
    I can still use airplay from applications that allow it, however I can not find the option to mirror my whole iPhone as I could with iOS 6.0.
    Anyone know a workaround?
    EDIT>>> FEATURE IS NOT MISSING
    It took me several restarts of my iphone, but the feature has reappeared.
    Message was edited by: pjanczuk

    I have the same issue. Any other app works with airplay. Music app, videos received in iMessages, YouTube and so on. The videos in the camera roll don't want to airplay. Either I get a black screen or a spinning wheel on TV. Any ideas?

Maybe you are looking for