Has anyone encounter a Grey Screen with spinning wheel stuck (frozen waited more than 5h) in after running Lion Installer from SL?

Hi
I've tried almost everything on my Macbook Pro 8,2 (i7 2.0Ghz).
Wipe/Erase the SL partition.
Burned the ESD dmg to a DVD.
Reset SMC,PRAM and NVRAM many times.
Run Repair Disk. Passed OK.
Run Hardware Test. Passed OK.
Download the Lion Installer 4 times. MD5 Passed.
Everytime I've tried to install lion it give me this Grey screen... The mouse wheel start spinning and it then stops, and nothing happens from that point. (Also rebooted many, many times same result).
SL Install disk runs fine, even installing it from Zero. I've setted up time machine. (The restore to definetly works also the SL installation too)
I'm a little far away to send my Macbook to a customer service.
What else should I try?
:S
VR

Thank you very much William
I ran the installer and saw the same screen stuck... After I used Shift to boot in safe mode, I got the 3 beeps with grey screen apple logo. So then I rebooted into Single User do the 'nvram boot-args="-x -v"' and voila the installer continued with no issues I've turned back de 'nvram boot-args=""' and everything seems to be working fine.
Really weird beahviour of the installer with my Mac.
Thanks.

Similar Messages

Grey Screen with Spinning Wheel Stuck!?!?!?

Ok so I updated to Lion 10.7.3 using the combo pack, I restarted my mac and it goes through the usual chime, apple logo. But after that it goes back to the apple logo, the app logo dissapears and what is left is a spinning circle with a grey screen. I can boot into safe mode but otherwise i am stuck. I have also reset the PRAM. PLEASE HELP!!!!

I'd try an Apple Hardware Test - that can be found here - http://support.apple.com/kb/PH4510.
Clinton

Hangs on grey screen with spinning wheel at start up

Power Mac g4 running tiger hangs on grey screen with spinning wheel (the wheel keeps going tho!) tried resetting the PRAM, PMU, changed the little battery thing on the main board, and starting from tiger dvd and os 9 dvd, dvds just keep ejecting. also tried starting in verbose and safe modes, still the same problem.
I can however access the hd through a network.
any ideas
Thanks

The only thing I know is to buy one. Not much help here. I have a collection of OS disks I bought to go along with all the Macs I've had and still have.
You said already that you had reset the PMU, but did you do that according to:
http://support.apple.com/kb/HT1939
If not, then this may help. The PMU seems to be a miracle part of the OS. You could then plug the HD back in and a miracle will happen. I've read several threads where people kept doing this and all of sudden everything was cured. I think the last one I read, the person recommended holding in the button for at least 15 seconds and then releasing it. I just go by the Apple tech sheets.

HT1455 imac wont start up and grey screen with spinning wheel appears

imac wont start up and grey screen with spinning wheel appears

See this Apple note on steps to take.

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

ashg23 wrote:
Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
Have you started up holding down Command + R and attempted to install again?
Pete

Imac 2008 stuck on grey screen with spinning wheel no discs I lost them

HI, I have a imac 2008 24" someone help please.stuck on grey screen with spinning wheel after 5 minutes mac just restarts again.I have no restore dvds as I borrowed them out and never got them back thanks

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

Mac mini shut down on its own, will not restart, grey screen, spinning wheel. Unplugged everything, will still not restart. Did safe boot, will not restart after safe boot, only grey screen with spinning wheel.

Mac mini shut down on its own. Could not restart, chime, grey screen and spinning wheel. Unplugged everything but monitor, still only chime, grey screen and spinning wheel. Started in safe boot, shut Down, will not restart.
This happened a couple of months ago, unplugged everything and it restarted, now that won't work.

Hi BDAqua,
I just did the repair as you suggested. T ran the disc repair, and twice it cam back, the volume macintosh seems ti be okay, I also ran the verify and permissions repair, both came back okay.
I was actually hoping that they would find something, so they could repair. I shut the computer down, and restated with out holding a key, and I started up great. I'm baffled. I have moved 20 GB to an external hard drive, as I only had 10% open space.
I have Tech Tool 6, would you recommend to run a repair check on that, or just leave well enough alone.
I agree with you on the new Mac's, I have problems with no disc for back up, until they realize their mistake I will stay with Snow a Leopard. This is the first problem I have experienced, so I can't complain. Their last programs are not as perfected as under Steve, prior to his handling over the reins, hope this is not going to be the future we can expect from Apple.
I will wait to here back as to your suggestion regarding the Tech Tool check
Thanks for all your help.
Gratefully,
Cheri

Mac pro grey screen with spinning wheel

mac pro grey screen with spinning wheel

Gray screem appears during startup:
http://support.apple.com/kb/TS2570?viewlocale=en_US

Old iMac won't start up and stuck in grey screen with spinning wheel

Hi, I have a very old imac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago.
Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel.
I tried many times off-on, hold down the apple function key but none worked.
I no longer have the rebooting CD with me. I wonder whether the computer can still be saved?
I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files.
Thanks
If I am not wrong, I think it's tiger or earlier that it's using.

Do you have the Install Disc to try to boot from?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

Hi guys,
since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
-2 weeks ago, i installed smcFanControl app
-Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
-entered Single User Mode and i get an error
SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
-followed some instructions found online, but can execute the correct commands in SingleUserMode
tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
any ideas what may caused this and how can i fix this?
Thanks in advance

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Grey Screen with Spinning Wheel

Hi Community,
I have a late 2006 MacBook Pro that will not load the desktop and will not get past the Grey Screen with the Spinning Wheel. I have read other forums, which have been very helpful.
This is what I have tried:
1. Safe Mode boots to black screen with login prompt (Used the shift key. Tells me all of my login attempts fail, despite using a correct password. When I tried with the option key I saw the two drives (Mac HD and the Bootcamped Windows), but then nothing.
2. Reset SMC
3. Reset PRAM
4. Loaded installation disks. Ran Disk Utility with no problems reported. Ran Harware test with no problems reported. Will not boot from the installation disk.
5. Tried the Control-Apple-Power start and nothing happened.
Is there anything else I can do? I have a pretty good back up, but would really love to get into to my hard drive one more time if possible to transfer some last minute work I had done. Would Firewire Target mode be an option (altough I am not sure I can find a firewire cable...I am at a research station in Costa Rica)? If that is not an option or not possible, is there another option to access my files before I erase and reinstall?
I am assumuing that my hard drive is failing. Also, I recently installed an external modem that perhaps caused the failure? My drive is almost full, which I am sure makes my older macbook pro sad And, it is bootcamped...how will all of this affect my windows side? Should I be concerned for my files on it?
Can I perhaps purchase Disk Warrior, would that help?
Thanks so much. I know this is a common post question, but I decided I would seek personal attention from you wonderful experts!
Regards, Chule

Try Using OS X Tiger and MacBook Pro forums.
http://www.apple.com/support/

Booting problem (grey screen with spinning wheel) PLEASE HELP!!

I have and ibook G4, i shut it down the other day and whent to school, when i got home, i tried booting it up, but its just goes to the grey screen with the apple logo and the spinning wheel, and doesnt go any further. i can hear the computer thinking, it that helps at all, but the weel just keeps spinning and it never gets to the login screen. Whats the problem? What can i do to fix it? somebody please help!!!

Hi,
Try starting in Safe Mode by holding the shift key as you start. Release it when you see the logo and spinning progress indicator. If successful restart normally.
If that doesn't work please post the version of OS X you are using (Panther,Tiger,Leopard) for more trouble shooting suggestions.
John

Both my backup drives show up, but fail to boot, staying in grey screen with spin wheel.

I did some maintenance, copying lots of files, running Cocktail for the first time (failing to note exactly what I did) and after running Disk Warrior on both my bootable external drives (one OWC, one LaCie) they both hang in grey Apple screen with spinny wheel and never boot up, though both did earlier in the day, and have never failed to boot in years of service. Both appear on the desktop, show vertified in Disk Utility and booted up fine one day before all the maintenance. I don't know what Cocktail may have done, but it may have created a (now solved) problem for Photoshop 7, which crashed thereafter while loading, something that's only ever happened twice in six years. I managed to track down a TWAIN plug-in that had always been in Photoshop, something to do with scanning, but was now causing the crash. Anyhow, Photoshop is now working again, (after just removing that plug-in) but neither backup will boot up. Please don't suggest a system archive and install. I'm hoping for some miracle little file that once removed will restore the booting of the two externals. Your help is greatly appreciated. Please assume I am brain damaged and spell things out for the simple-minded. Thanks in advance.
I hope BDAqua sees this.
I only have one iBook, and it's less than half full; couldn't figure how to edit below that I'm now on 10.4.11. See what I mean?

Since you are using your two external drives for booting, do you have clones on them?
If so, why not simply update the clones? I'll bet they'd boot for you if you do that.
I'll put out a call for BDAqua.

TS1388 stuck on grey screen with spinning wheel

My computer was stuck on a program and i held the power down button to close it. When I turned back on my macbook pro the only thing I get is a grey screen wioth apple logo and spinning wheel, It stays stuck on this for hours.

Hi Rick,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

After software update, required reboot results in grey screen with spinning wheel, cannot get out of it.

How do I get out of a spinning wheel after a reboot from a software update?

Talked to apple about this... The suggested fix is to boot holding Command-R and choose re-install.... I know.... I've never had to reinstall OSX; I thought that type of fix was limited to the Windows world.
Oh well, I guess apple developers aren't perfect after all.
Good luck!
Sorry... this posted to the wrong thread by accident...

Has anyone encounter a Grey Screen with spinning wheel stuck (frozen waited more than 5h) in after running Lion Installer from SL?

Similar Messages

Maybe you are looking for