Has anyone encounter this "unable to set node credentials for /LDAPv3"?
Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
Thanks
Luis
Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
Which implies that at least two problems lurk.
Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
I did not expect that Open Directory would be a big problem.
If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.
Similar Messages
-
Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`.
When starting Server Preferences, I receive a window with the following text:Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`. There may be an error with the Open Directory Service.
This started to occur after I used the command changeip to change the ip of the service.
I've tried (Re)starting Open Directory Service, but that doesn't resolve it.
Does anyone know how I can resolve this error? I'd like to be able to user Server Preferences again!One of our servers (10.6.8) that had been running for months suddenly started generating that error message when trying to access Server Preferences. Workgroup Manager, which seems to use the same login information, accessed just fine. We tried deleting access information in Keychain, to no avail. What finally worked for US was:
- Via Server Admin, (in Open Directory > Settings > General) change the Role: Open Directory from Master to Standalone
- This (for us) then restored access to Server Prefs
- Use Server Admin to change the Role back to Master
Warnings - 1) backup first 2) you will have to reinstall the master password, and 3) ALL accounts were lost and had to be recreated. -
Unable to set node credentials for /LDAPv3 query
Hi,
I've seen a number of threads on here about the above message, but most are answered/archived, so no replies are allowed.
I managed to set up the Mac Mini server and get a VPN up and running quite successfully, however the upload speed was incredibly slow (especially given what the ISP advertises). I thought bypassing my airport extreme may help this, so I attempted to plug directly into the modem (which is a router in itself, but pretty limited). I have 5 static public IP's from my ISP, so I configured the Mac Mini to have one which I knew wasn't being used. Connection to internet all worked, but this message began appearing when I tried to go into Server Preferences (to change VPN settings)
I've read that this message often occurs in relation to static IPs, or rather the lack of. Given that I had assigned the Mac Mini to one of the static IP's, I'm not certain what the problem might have been.
Plugging the server back into the Airport Extreme, and reconfiguring the network settings for the router setup fixed the issue, and I was able to access Server Prefs again.
My knowledge in this area isn't all that vast, so I'm sort of learning as I go, so please be as plain and simple as you can - thanks a lot!One of our servers (10.6.8) that had been running for months suddenly started generating that error message when trying to access Server Preferences. Workgroup Manager, which seems to use the same login information, accessed just fine. We tried deleting access information in Keychain, to no avail. What finally worked for US was:
- Via Server Admin, (in Open Directory > Settings > General) change the Role: Open Directory from Master to Standalone
- This (for us) then restored access to Server Prefs
- Use Server Admin to change the Role back to Master
Warnings - 1) backup first 2) you will have to reinstall the master password, and 3) ALL accounts were lost and had to be recreated. -
Unable to set node credentials...
I have setup the server as an OD master, and up until now it hasn't had problems binding, although I haven't been able to get any users to authenticate for any services, other than my local admin account.
I haven't made any changes, but now when opening ServerPrefs, I get the following error:
"Unable to set node credentials for /LDAPv3/127.0.0.1 with the record name server.mydomain.com$ There may be a problem with the Open Directory service."
Any ideas where I went wrong?It isn't something that a patch is going to cure.
I believe it does have something to do with the network and probably therefore the ip address / naming as the authentication does seem to be tied to the network location.
I've managed to move things on a little in that I have bound user accounts on other machines such that when someone logs onto their laptop it will tell them they have an account on the server and provide a logon after which their account is bound and (I think) marked as 'managed' in their Preferences | Accounts. This provides additional sections in iCal and Address Book although these don't work. The only person who can log into the web stuff such as the wiki is the server admin and I still can't access the Server Preferences or authenticate the Server Admin so can't make much in the way of changes.
I've submitted my application to Apple for support using the card provided with the Mac Mini. This was last Thursday and I've not yet received confirmation that this is live. As soon as it is I'll be having a long conversation with Apple Support.
I sort of sympathise with Apple as the server is clearly at least an order of magnitude more complicated than the admin involved with just a desktop. Having said this, however, they do need to get this sort of thing sorted by making it slicker, providing more online support for these problems if they have any aspirations towards the smaller office or even home environment which don't have dedicated IT support staff. -
I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?
Hi Eric,
The message seems to totally disappear. It is going to an AOL customer in UK. I changed their address to start with a lowercase letter & the message was returned to me by AOL as undeliverable, I then changed the first letter of the address beck to upper case, the same I have been using for years, but again it disappeared.
I appreciate any help you can give me. Tks Gord. -
Has anyone encountered this problem. I am desperate!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Cheers, Tom -
Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe> -
I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?
I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
The two cars I have are an Audi and a BMW and both have manufacturer connectors -
My ipod touch will not sync. I get an unknown error code 13109. Has anyone encountered this issue?
My ipod touch will not sync on my computer. I get an unknown error (13109). It appears to be syncing but this message comes up. Has anyone encountered this problem?
Start here:
iTunes: Error 13019 during sync -
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
Hi there - Every time I try to open an app, it seems to crash. Has anyone experience this problem? Suggestions are appreciated for getting this fixed. Thx!
- Reset the iPod. Nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/.install any new app.
- The remaining items here:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod -
I am trying to setup my Macbook Air to make & receive calls but I am getting an error message stating "FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls" when selecting the box to turn on iPhone cellular calls on my Mac. I have OS X Yosemite 10.10.2. I am signed into iCloud, FaceTime, & Messages with the same Apple ID. Is anyone encountering this?
Hi,
The Same Network is only needed for the Text Forwarding part of the Messages app on both and the iMessages account's Text Forwarding.
I understand Blue Tooth is On but have your paired the two devices for Handoff and Continuity ?
I cannot do this bit on my Mid 2011 iMac so I am a bit lost as to the actual settings.
8:13 pm Thursday; April 9, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
This is the error message I receive:
Error occurred while creating new cluster: CNFSSharedStorage::_subscribe: command [/sbin/mount Users-of-AccessVisions-Mac-Pro.local:/Volumes/Tom Morris 3 TB Drive/MK 43/E1298583-AD8A54CA/shared] failed, error = 13
Has anyone had this error before and know of the fix? Thank you.Hi Captain,
Don't panic, it's just the preview cache. Find your catalog on the hard drive - usually in the Pictures folder called Lightroom 5 Catalog.lrcat by default. You'll see a *Previews.lrdata folder there. Rename it and restart LR.
LR will have to rebuild previews, but then everything should be ok. You can let LR rebuild the previews as you need them, or you can select them in Grid view and go to Library menu > Previews > Render Standard Sized previews.
Once you're happy that everything's rebuilt, you can delete the one you previously renamed.
Cheers!
md -
Has anyone else been unable tos et up a pre-paid account from a new i-pad mini. If so, did you ever find a solution?
It works fine here.
I noticed that I don't have /etc/php.ini, just php.ini.default.
If I copy php.ini.default to php.ini, php does not work anymore, but if I just put
date.timezone = Australia/Brisbane
in /etc/php.ini and restart apache, it works fine and the timezone is OK in phpinfo(). -
Has anyone encounter this issue
I have used Itunes and brought my items from the Itunes store. Currently I have more than 90 items that need to be downloaded from the Itunes. the problem is I can't download my already paid download in my Itune queue.
This is the message I keep getting:
( Unable to check for downloads. The networdk connection was rest. Make sure your network connection is active and try agian.)
Please note I can buy all the items I want form the Itune store I'm just unable to download 98 + download because this message keeps showing up.
Has anyone ever encountered this message and had such a problem?????Have you tried to download them in small groups?
Maybe you are looking for
-
Question regarding synchronized
I was trying out some code to understand the working of synchronized. I wrote a small program where the objective is that multiple threads will access a method which increments a static variable. However, I am not sure where I am going wrong. This is
-
Coldfusion mx7 on fedora core 6 Anyone??????????
I get the JRun Servlet Error when trying to run cf admin. port is 8500 for machine name , i have tried localhost, locathost:localdomain, 127.0.0.1 but none of them work. where am i going wrong? I have installed coldfusion mx 7. In services configurat
-
Song order in playlists makes no sense now
So when you grab songs from the purchased area of your library, it used to be that they would play in the order in which you grabbed them. Or if you resorted the library by genre, it would play those songs in order. Now I have no idea how it is cho
-
What comes in the box with the Airport Express?
I'm looking to buy and Airport Express for my husband but I really can't find a helpful sales person willing to put up with all of my questions. For starters, what comes with the Airport Express? One salesperson told be that I need to buy cables and
-
IPad 3 with new iOS 6 cannot determine location.
I just downloaded iOS 6 for my iPad 3, and Siri, as well as Maps, cannot determine my location. All location features are enabled. Is this just a bug, or am I doing something wrong?