Has anyone encountered problem with VIRSA_CC_ACTUSAGE missing some data?

Has anyone encountered a problem where the VIRSA_CC_ACTUSAGE table is missing some transaction activity?
We have a situation where the monthly ST03 file shows that a user executed the MI31 transaction some time back in August.  However our ACTUSAGE table does not show this user performing MI31 for any day in August. 
It does have records of other people using MI31 in August.  It also has records of this same user performing other transactions in August.  It even has records showing other transactions this same user performed in August.
This is now an issue with our external Auditors.
We are on GRC 5.3 SP 13.
Thanks.

Hi Bob,
VIRSA_CC_ACTUSAGE holds information on the transactions executed by users and it gets the data from STAD. Did you notice the time user has spent in the MI31 transaction code (I know even if the user hasn't spent more time, it should be recorded), but this another step to isolate the issue.Also, check SM21 logs on that specific day, and see if there are any events registered during that time related to STAD. I think it was not able to collect the data.
Also, check VIRSA_CC_ALTCDLOG. This is the Alter log table that stores information of ACTUSAGE. The purge utility will only delete the data from the ACTUSAGE, but it remains in the ALTCDLOG.
Refer to SAP Note 1512020 for additional details on the Alert files.
Hope this helps!!
BR,
Raghu

Similar Messages

  • Has anyone encountered problems with installing so...

    I have a problem.. there are some themes and software that I cannot install because i receive an error message that saiz :"expired certificate " or something like that..
    I have to mention that the install all software box is checked.. so is there any solution ?
    regards Ionut

    I downloaded and installed the 10.6.8 Combo this morning and immediately thereafter when I tried printing a document on my OfficeJet Pro 8500 from HP the system paused for two minutes and THEN printed the document.  I tried printing several other documents with the same result.  However, I then shut down and restarted my iMac, and when it had finished rebooting, I tried printing again and the pause in the system for printing was gone.  Problem solved!
    Hope this helps.

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

    Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

    iphoto upgrading: Apple Support Communities
    iphoto upgrade hangs: Apple Support Communities

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • Has anyone experience problems with loading the latest Flash Play?

    Has anyone experienced problems with loading the latest Flash Player?  I have done this several times and the same results come up - Install the latest Flash Player.  I run Microsoft Vista.

    What is your browser?  If IE see
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • HT201272 Has anyone had problems with their apps downloading to their ipods?

    Has anyone had problems with their apps downloading to their ipod? Or know why all apps have been removed from their ipod?

    Possibly, but what problems?  Any errors?
    If you are really running iOS 3.1.2 as your signature suggests, that is likely the issue.  Many apps now require iOS 4.3 or higher.

  • Has anyone had problems with iCloud being blocked by corporate web security?

    Has anyone else encountered problems with iCloud being blocked by the web-security on company computers?   I never had any problems with me.com, but now it appears I will be unable to check my mail via any computer at work. 
    Since iCloud is a portal for high-volume image and file sharing, I can understand why the site would be blocked, but it's very frustrating that this possibility would not have been anticipated, and an alternate web-mail site been set up.  Otherwise many me.com subscribers may be left unable to use the iCloud web-mail portal via computers at work or at internet cafes that may block access to potentially risky websites.
    Has anyone figured out a back door to this problem? 

    I dont beleive its an iOS 5 Issue - i think its hardware...
    Simply because i have been running iOS 5 beta's since june and there were no issues with my iPhone 4.
    When i installed the GM on my iphone 4 (which is the same build as the public release) there were no issues with charging in my vehicle.
    Now, charging my iPhone 4S in my car is practically impossible.
    when i plug mine in, it will display the "Plugged" symbol on the battery display but not actually charge. the battery will still decrease.
    then it will randomly "disconnect" and not register that it is plugged in. then appear to be plugged in, then not, then plugged in, then not.
    This will repeat over and over again without actually charging and the charger being in the socket throughout.
    however yesterday i left it plugged in and my battery was 9% and after the strange plugged-in behaviour i noticed it was charging normally after about 20 mins in the car.
    But when i did the same journey time today, the battery wouldnt register at all.... charging has only been successful ONCE since 14th October on the iPhone 4s
    No idea whats up with it...
    anybody else?

  • Has anyone experienced problems with Outlook after installing Mavericks?

    Has anyone else experienced problems using Microsoft Outlook after installing Mavericks?  The computer seems to want to continue reloading emails.

    RobertRTillman wrote:
    1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
    2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
    3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
    4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
    In short, we are screwed and neither company seems to care.
    In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
    Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

  • Has anyone had problems with Domayne using generic third party RAM for memory upgrades? My RAM is now faulty and had to be removed, but Apple wont replace it under Apple Care because its not a genuine component?

    The computer was purchased in the knowledge that all components and hardware were genuine and subsequently covered by the Apple Care warranty.
    Domayne replaced the genuine components (8GB stick) with generic components (2x 16GB sticks) to save money and boost margin.
    Apple should not allow this misleading, profiteering behaivour. This behaviour is brand damaging. Apple must maintain more control over their supply chain.
    Has anyone had any expirenece with this problem?
    Has anyone made Domayne or other third party resellers acountable for this misleading behaviour?
    Thank you.

    Stick with Brand name RAM and reputable distributors.  Mac is finicky about low quality RAM
    Try OWC http://www.macsales.com/
    Crucial http://www.crucial.com/
    Most RAM comes with Lifetime guarenntee so return it where you got it.

  • Has anyone had problems with burner after upgrade to Mavericks on an iMac 27"

    Has anyone had a problem with the burner after upgrade to Mavericks.  It is hunting not always reading picture files keeps showing a fault when trying to burn a DVD. 

    I am having the same experience.  I just update this morning and now can't get mail.  Did you ever figure this out?

  • Has anyone had problems with the out of the box windows adapter

    Hello all,
    If I run a trusted reconciliation from our student records system to a group in OIM, that has an access policy thet provisions home directories on a windows server, some home directorys are created, but not all. Usually the Windows connector makes the provisiong run fail.
    We are successfully provisioning:
    1) Student records system trusted recon to IDM
    2) Active directory and exchange
    3) Blackboard (virtual learning environment)
    Unsuccessfully provisioning
    1) Windows
    Has any one else had problems with windows adapter?
    Thanks
    Dave.

    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 20 Seconds...
    Turn the Phone On...

  • Has anyone had problems with iphone freezing up

    iphone has frozen up, has anyone else had this problem?  What did you do?  I can't turn it off or anything.

    check the "More Like This" box to the right or search using the box at the top of this page.  Your question has already been asked and answered countless times.

Maybe you are looking for