Has anyone ever recovered deleted FLAC files?

It doesn't work with any software I have tried so far. They just don't recognize it, just aiff, mp3, aac.
Thanks a lot for a tipp!
Peter

Interesting - I am glad some one has had some success.
Just to clarify though - you mention hibernate, I was not talking hibernate - but suspend. They are 2 different modes. S3 suspend is a low power mode where the CPU and memory are powered on - but inactive. Hibernate copies memory to disk and turns the power off entirely.
Resuming from S3 just requires some sort of event like touching any keyboard key - the return to normal operation is (almost) instantaneous. Return from hibernate requires the power button to be pushed, the disks to spin up and the memory dump made when hibernated copied back to the memory. This takes say 20 seconds.
Interestingly I can not get return from S3 to work on either Vista X64 nor Windows 7 X64. If I try hibernate on Windows X64 it mumbles something like 'Windows has unexpectedly stopped - start normally or...."

Similar Messages

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT203200 has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading "Outlander / Howard McCain". An unknown error occurred (-50)."

has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading “Outlander / Howard McCain”. An unknown error occurred (-50)."
kinda suck to pay for something you cant use!..

Try fixing up the validation issues...
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
Not promising it will help, but it's worth a shot.

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cps?

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Has anyone ever had a problem with their iphone 4 not syncing and/or writing a backup file?

Has anyone ever had a problem with their iphone 4 not syncing and/or writing a backup file? Itunes locks up when i attempt a sync as well as when I transfer my purchases from my phone to Itunes. I'm running Itunes 10.4.1 on iOS 4.3.5. All of this is running on an 8 year old hp pavillian laptop running XP Pro that is fully updated. Could my phone have a bug or a hardware problem. Are there any known problems with iOS 4.3.5? Pretty frustrating problem so I'm hoping that someone has heard of this and can offer some suggestions on a solution. Thanks a bunch.

Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM

Has anyone ever seen this error

We just launched a vaccation tracking app with a coldfusion
front end and an access 97 backend (dont ask). The app was tested
for over a month and passed all tests. However we never tested for
volume, or amount of users hitting the app. On the backend, we have
an access table linked to a text file. Again, this tested out
perfectly over the past month. This morning after release to the
entire company of about 2,000 people, users began reporting this
error:
The text file specification 'EmployeeList Link
Specification6' does not exist. You cannot import, export, or link
using the specification.
Some users logged in to the app successfully and some
recieved this error. For those that recieved the error, we had them
back out and re-login and then the app worked just fine.
Has anyone ever seen this or have a guess as to what is going
on?

Hi,
The right way would be to use a "real" database server.
But you can test if db-caching can improve the issue.
With each <cfquery> you can set a cachedwithin
parameter. Using that should allow you to query the Access db once,
and then have CF keep the query results in memory (for the DB as
well as the text-file).
You could query the complete database with no filtering this
way, and then filter the data using QueryofQuery to output only
records for specific users/groups/regions.
You also need to make sure the settings in CF admin are
configured right for this.
The more often the database content is updated, the slower
this solution will get though.
cheers,
fober
ps. for the cachedwithin parameter in the query set a
timeframe of forever, so the recordset never gets updated, and then
actually execute a new query to update the recordset at the end of
your "save a vacation" or "updated a vacation" functions. This way
the app would only read the db when a real change to the records
occurred.
But like I said with 2000 users, even that may not be enough
to get the app performing.

3 GS freezes to white screen occasionally after hitting home button. Has anyone ever experienced this?

Has anyone ever experienced a white screen that freezes then turns black after hitting the home button?

I have had intermittent white screens for some time (as in three years). It happens when the phone "wakes up". I hae lost calls that I could not answer because the screen was white. It has come up white when I hit the home screen. Not always, but with random frequency. All I have to do it hit the power button (I do not have to power off, just hit the button) and reopen the phone and it is gone. I know the phone is functioning under this screen, I just cannot do anything.
My first 3GS had the problem so severly I called Apple. After two and a half hours of resets of various kinds, they decided the phone was bad and sent my a replacement. It was better, but it still has the issue. I have gotteb used to it and am waiting until I can get an upgrade to the phone in the hopes it takes care of it. In the meantime, I occasionally doa search here and un the intertubes to see if someone else has the issue and a solution.
My suspicion has been that some app I downloaded causes it, but I have deleted apps and cannot get rid of the issue.

Recover Deleted Offline File in Window's 7

Documents that were suppose to sync with the server had not synced in months. The filess I am sure were being saved to the offline file cache. The offline file cache was deleted by using microsoft hotfix 50561 (kb230738), reinitalizing the cache and correcting
the save path. The documents are very important. I researched and found the xp tool for recovering deleted offline files. csccmd.exe by using the command
csccmd.exe /extract /target:c:\docs /recurse
Is There a tool like this for windows 7? is there a way to recover the lost files. Previous versions and system restore was not enabled and I have not been able to enable then.

Hi ShaneC_76,
Thanks for the post!
Please refer to<cite>
</cite>Windows Offline Files.
Check the 10. Restoring Offline Files In Windows Vista and 7.
Regards,
Miya
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Has anyone ever had this problem and know how to fix it!!! I upload songs on to my ipod and they appear on the ipod in iTunes but after I disconnect they are not on my ipod!

has anyone ever had this problem and know how to fix it ?? I upload songs on to my ipod and they appear on my ipod in itunes but after i disconnect (the correct way) the songs do not appear on my ipod. If i plug the ipod back into my computer it still shows them as being on my ipod through itunes but not when i disconnect please please please help!! thankyou! (Also the songs i'm trying to upload are cd's that i have brought)

See Grouping tracks into albums, in particular the section Missing Artist or Album not with others by same artist.
tt2

Has anyone ever ran Logic using VMWare Workstation on a Windows PC?

Has anyone ever emulated Mac OS X and used Logic on their x86 Microsoft Windows systems? I was thinking about doing this to use some synths and stuff with some Windows designed software. I'm not sure if it is possible to use both operating systems at the same time with VMWare Workstation operating system emulator. Help me out guys. Has anyone ever done it? Can it be done?

VMWare Workstation will not run the client version of Mac OS X in emulation, and likely won't run Mac OS X Server either.
(32050)

I have a Macbook Pro, and I cannot get onto my my job's wi-fi network. Has anyone ever had a problem getting on a wi-fi network at your place of employment?

I have a Macbook Pro, and I cannot get onto my my job's wi-fi network. Has anyone ever had a problem getting on a wi-fi network at your place of employment? I have a username and password for the network, but when I try to go through the Connection Assistant and put in my password, it says its the wrong password.

you need to contact your employers IT department.

Has anyone ever succeeded to use the scope_identity() from the LabVIEW DB toolkit ?

Hi,
Using LabVIEW 2014 DS, and MSSQL 2008R2.
I have configured a table with identity, so the indexed will be incremented automatically.
I am trying to get the ID of the last Insert command that I am using.
I am trying to SELECT SCOPE_IDENTITY() but with no success.
I read about trying to so it with a procedure or transaction, but I just could not succeed myself.
Has anyone ever succeeded to use the scope_identity() from the LabVIEW DB toolkit ?
If yes, can you please elaborate more or even share the code ?
Thanks,
Amitai.

Yes I have...let me dig out some code...
I do my INSERT query (with a semicolon at the end) and in the same query string do a "SELECT SCOPE_IDENTITY() as inserted_id;" - essentially what you're doing here is running two queries in one - one to insert your data and the second to retrieve the ID. From what I remember of when I did this (last year?), I think scope_identity() is valid for the same connection so as you're doing both queries in the same connection it should always be valid.
I then do this to get the ID (pardon the crappy VI snippet):
Essentially I execute the query and the result is a 2D array that contains one row/column which is your last inserted ID.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Encore burns to DVD, not Premiere Pro... moving to Encore forum
These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Has anyone ever had the icons on the menu magnify? My phone slipped onto the floor in my car and icons are now hugh. Don't know how to fix it.

Has anyone ever had the icons on the menu magnify? My phone slipped onto the floor in my car and icons are now hugh. Don't know how to fix it.

Double tap the screen with 3 fingers.
Stedman

Has anyone ever recovered deleted FLAC files?

Similar Messages

Maybe you are looking for