Has anyone ever used their iPad to remotely connect to a iMac and use programs like Photoshop on their iPad?

Hi everyone,
I had an iMac at home, but I've recently taken on some freelance work and they would like me to come into the office every now and then. I don't want to purchase a laptop and I know you can remotely connect to your desktop with an iPad, but I need to know if anyone has ever done that and successfully used programs like Photoshop on their iPad. Is there lag time when trying to use the software? Or is it just not possible and I should consider getting a laptop again?
Thank you!

iPads are not exact laptop replacements. If you need to be using Photoshop, then buy a normal laptop computer.
Using a remote access app on an IPad or any tablet conputer to remote access your computer to operate will be quite a lot slower and clumsier than just having a laptop with a normal OS and Photoshop application installed.

Similar Messages

Has anyone ever used this CF8 host?

Hi,
I'm currently using HostMySite - but it's just for my
personal site and it seems like I'm paying just too much for what I
use it for $23.95 USD (about £12 GBP) per month.
This company (
http://www.hostingfuse.com/index.php/fuseaction/hosting.webhosting
) seem to be Australian, offering reasonable CF8 hosting for $10
AUD (about £4.5 GBP).
Just wanted to know if anyone has used them and what they're
like? Or if someone has alternative solutions?
Thanks,
Mikey.

> Just wanted to know if anyone has used them and what
they're like? Or if
> someone has alternative solutions?
You may only want an Australia Host but I like
http://www.gearhost.com They are
located in CO
and have very reasonable prices. The nice thing is
that you can use CF, ASP or PHP with any account.

Has anyone ever had their Iphone 3GS jsut shut off repeatedly?

My Iphone 3GS has begun shutting off for no apparent reason. I can be surffing the internet and have sufficient battery and it will just shut off. Has anyone else experiences this?

I'm sure there are people who have had this problem. I haven't however. But I don't see how finding that other people have had the problem will help you fix yours.
A Restore with iTunes may fix it. If it doesn't do the Restore again and do not reload your backup. If that fixes it the backup is corrupt.

Has anyone ever used web start in large scale ?

Dear friends,
have you ever used some web start application in large scale ?
i.e., have you distributed some real application with web-start?
I�m doing such experience here and I�m a bit afraid about several problems in the final user machine - such as java version, browser incompatibility and mainly with the ugly WebStart cache problems.

can you give a bit more detail on what exactly you're afraid of? is this a www application? internal business app? etc.
for example you can force your java version in java web-start,etc...

Has anyone ever used a Yamaha Robot Controller (SRC-X)?

I just inherited this controller and I'd like to use it with LabVIEW. I just don't know where to start with it. Any help is greatly appreciated.

Alyssa,
I have been able to get communication working with the ERCX. It was fairly straight-forward and so I'm wondering if you have the correct serial settings. 9600 baud, 8 data bits, 1 stop bit, odd parity, XON/XOFF handshaking. I leave the termination character enabled so that the and the default termination character will work for this "\n". The controller actually sends back a "\r\n" termination, but with the "\n" last, this sould work. I then call the VISA Read and tell it to read up to 10k bytes. Once it finds that termination character, though, it will stop the read.
I've attached two screenshots that might be helpful. You probably already are aware of this since you've had the communication successfully via HyperTerminal, but in the LabVIEW sense, it's helpful to take your "Write Buffer" string input and set it so that it's in "\" Codes Display mode. This will allow you to manually type in the "\r\n" you need at the end of your command. Also, each command starts with the "@".
Let me know if I can be of further help.
Jim
Attachments:
Read-Write Screenshot.JPG ‏25 KB
Configure Serial Port VI Screenshot.JPG ‏20 KB

Has anyone ever "lost" their library and all their playlists??

When I first looked at my library today, all the songs (I have about 300 on my nano) were gone!!!! How can I get them back? I am worried that if I sync my Ipod I'll loose them for good!

iPads are not exact laptop replacements. If you need to be using Photoshop, then buy a normal laptop computer.
Using a remote access app on an IPad or any tablet conputer to remote access your computer to operate will be quite a lot slower and clumsier than just having a laptop with a normal OS and Photoshop application installed.

Has anyone ever used Dynaflo LIQUID-ARMOR?

It's discounted through Apple User Groups... anyone know anything about it. Anyone used it? I use iKlear once a week (or as needed) but this is something else.
Thanks,
Clinton

Clinton. I just bought and tried this on a recommendation a few days ago. It seem's simple enough to use. You simply wipe it on, let it cure, then buff off your screen with the included micro-fiber cloth. I can tell there is something there but I can't say 100% that it is actually providing "additional" protection. It does not change the appearance of the screen or add any "tackiness" to the screen. The screen looks as good with it on, as with it off. Exactly what I want as I do not want to use a screen cover on my iPhone 5 and iPad. I figure for the $19.95 I paid at CompUSA, it can't hurt. And there is enough to treat multiple devices more than once.
Hope this helps.

Okay friends seriously- has anyone ever restored their iPod?

I'm going on almost an hour of my iPod restoring itself to factory settings. Im thinking that something is wrong because the status has said "waiting" for about an hour.

Well..I am kind of in the same boat. I just received the Black 80GB Video iPod. Now mind you, I have had an iPod before, so I am familiar with it all. But this one decided to corrupt itself within the 2 days I have had it. I am not sure what caused it, whether it be the latest version of iTunes (which I have read has some bugs) or something I loaded onto it (music, movies, tv shows, etc.). Who knows? What I do know is that it is constantly in the Do Not Disconnect screen with the round "NO" symbol above it. I have tried to reset it with and without connecting it to the computer. If it is not connected, it tells me in 4 different languages to connect it to the computer. And when I do it flashes DO NOT DISCONNECT and charges the battery. After awhile it freezes on that screen. I have tried to restore it.....on two different computers, different USB ports and I keep getting the same message. It will attempt to restore with the progess bar going back and forth...and depending where the IPOD is in it's frozen or unfrozen state, the computer eventually gives me the message The iPod "iPod" could not be restored. An unknown error ocurred (1418). What the heck do I do. This all started when my iPod would not turn off. So I decided to hook it up to my computer to refresh it or something. But then I found out it is CORRUPT. How it got that way, I do not know. Any suggestions anyone? All I want to do is restore the **** thing so I can reload all my stuff back onto it. I am in Denver at the moment by the way...trying to get back to LA...so the suggestion of going to the Apple store will not fly at the moment. No pun intended. I am looking for a good ol' home remedy. There has to be something I can do. Anyone? Please.
Matt
This has been an all day uphill battle by the way. Borderline Nuts at the moment.
Toshiba Satellite Windows XP

Has anyone ever had their icons disappear on their dock

I was using Address book and when I started it the picture of the book became an picture of a program that looks likes it is downloading the program for the first time. Can anyone help me git the normal on back or tell me where to find the help to do that.
iMac Intel Mac OS X (10.4.3)

With Address Book closed, drag its icon off the Dock. It will go 'poof' and disappear. In Finder, click on Applications, locate Address Book and click on it once and drag it to the Dock. That should replace it.

Has anyone ever used an invisibleShield on a Mac laptop?

I have just ordered a White Macbook and am concerned about the yellow discoloration issue. I was thinking of ordering an invisibleShield from www.shieldzone.com and I wondered if anyone had any experience with the product? They just released the 13" Macbook shield in the last day or so.

are you sure heating cause discolorization? I doubt it because iBook has the same materials on surface as well. even macbook heating get more than iBook, it's not too much higher to damage the surface.
by the way, as far as you keep vent clear, invidisible shield will be fine. I just visited that site. there are three options they sell. but I don't recommend that you buy bottom shield. for top plate where Apple logo is glow, and touchpad, palm rest, it will be fine. I also consider to get one, too.

Has anyone ever used Windows Server failover | SQL failover?

We run a SQL Failover cluster and it has to be the same.
All nodes in a failover cluster must be of the same platform, either 32-bit or 64-bit, and must run the same operating system edition and version. Also, 64-bit SQL Server editions must be installed on 64-bit hardware running the 64-bit versions of Windows operating systems.

I was looking to see if anyone has exposure to this and if you can actually run failover with two disparate OS's, ie. Server 2008 R2 and Server 2012.
This topic first appeared in the Spiceworks Community

Has anyone ever used a livescribe smartpen with a Mac?

I am about to purchase a livescribe smartpen which will record handwritten notes and audio and store them to a computer. Most of the promotion about the smartpen describes its use with a PC. How does it work with a MacBook Pro?

You may not get an answer here. I took a look at the Amazon reviews for the Lightscribe, and there were very few that dealt with the Mac, and the best review was decidely negative. Not good.

Has anyone ever used a Varian Sentorr unit?

I have a BA2 model, and although I can write serial commands in Hyperterminal and display the Sentorr's answer there, when I use the Labview Example Code (serial communication) it times out before answering. If you bridge the serial pins, Labview will read what it writes... So why doesn't the Sentorr recognize my code?

Are you sending a termination character at the end of your command. Hyperterminal does this for you but you have to add this yourself when you write your own program or use the example. The term character is usually a CR or LF (check your documentation). In the example, you can right click on the string control and select '\" Codes Display and enter a \r for carriage return or \n or a line feed. You could also use the concantenate string function to add the character to the string written - use the constants on the string palette or you can use the VISA property node to automatically add the term character to every write.

Has anyone ever used the f:runGlobalApplication/ tag?

The taglib documentation is not very helpful. My best guess is that this tag is meant to execute a global activity. I tried testing this out in Studio, but I get an error saying that Process '/' is not available. This kind of makes sense, as I don't see any way to identify which process the activity may reside in. A search of "runGlobalApplication" on the forum turned up zero results, I'm hoping someone out there knows how this tag works.
Edited by: cfritz on Nov 16, 2010 9:14 AM

How to pass parameters to global application?
There is a tag <f:param ...> , but how to get the parameter value in a Global Creation activity ?
Edited by: pinei on 20/06/2012 13:12

Has anyone ever had an email from Apple asking them to update their details for their Apple account on IPad? Kinda worried as it asks for my bank details and bank account number and security code on the back of the card. Thanks :)

Has anyone ever had an email from Apple on IPad asking them to update their account details? The email seems genuine enough as it asks you to sign in with your Apple ID and password and takes you through to the Apple site but am a bit worried as they ask you in the section Update Your Apple account for bank and credit card details and for the security number on the back of the card. Also in the section where it asks for my mobile number it will only take 10 numbers and when ai try to put in the final (11th number) it won't let me. Sorry am new to all this and a bit confused! Any help is gratefully appreciated.....Thanks.

That is phishing attack
Someone, other then Apple, sent it to you
Read http://support.apple.com/kb/ht4933
Allan

Has anyone ever used their iPad to remotely connect to a iMac and use programs like Photoshop on their iPad?

Similar Messages

Maybe you are looking for