Has anyone experenced issues after upgrading the lastest upgrades?

I'm having issues with my mac not waking up... any ideas or feedback?

have you tried coffee?
What sort of computer are you running, tower or book? and which update are you up to?
This sort of thing has been linked in the past to processes which aren't 'sleeping' properly- do you have any unusual software or plugins active?

Similar Messages

Mac OSX has loads of issues after upgrade

I upgraded my OSX to mountain lion 10.8.3, and after 2 days it is completely crippled. I will try to describe my problem as there are loads of symptoms.
My Activity monitor shows UserEventAgent, SystemUIServer, and loginwindow eating 2GB of memory each. Plus I installed a new App called Onyx to try to resolve issue, and even that app is not working eating 3gb of RAM. My mac is crippled, every app just crashes, I can't even successfully shut it down because it so overloaded. Oh, and the worst part, the Upgrade ruined my Time Machine Backup, because after upgrade it started backing up and crashed in the middle of it showing black screen of death.
The best (or worst) part of this horror story is, is that I tried reinstalling my OSX by doing Cmd-R. Everything went smoothly to a point where I choose the HD to install to, and it only listed a recovery drive, the main drive wasn't even on the list. What this means, is that I'm deep in the water, and I have no idea how to bring my mac back to healthy state.

I have not done so for /private/var/run/StartupItems because I don't know how to get there.
You can't get there, because no such folder exists or ever has existed on any computer.
If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

I think a few have.
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Has anyone else had problems with the macbook pro after the OS X Yosemite upgrade?

has anyone else had problems with the macbook pro running slow after the OS X Yosemite upgrade?

Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

TS1702 Has anyone had issues signing off of Facebook after installing iOS 6?

Has anyone had issues signing off of Facebook after installing iSO6 update?

Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.hp.devicemonitor.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          AdobeResourceSynchronizer
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Adblock Plus: Version: 1.7.4.1135
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
          Slick Savings: Version: 1.0
          Searchme: Version: 1.3
          AdBlock: Version: 2.6.18
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          Safari
              16%          com.apple.WebKit.WebContent
               5%          PluginProcess
               4%          WindowServer
               3%          com.apple.WebKit.Networking
Top Processes by Memory:
          289 MB          Safari
          131 MB          com.apple.IconServicesAgent
          82 MB          com.apple.WebKit.WebContent
          82 MB          mds_stores
          66 MB          Finder
Virtual Memory Information:
          721 MB          Free RAM
          1.62 GB          Active RAM
          1.05 GB          Inactive RAM
          636 MB          Wired RAM
          1.18 GB          Page-ins
          0 B          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

Has anyone had issues with the calendar dropping appointments?

Has anyone had issues with the calendar dropping appointments?

sackster77 wrote:
{snip}. . .Has anyone else had this issue?
Answering this question will not help your issue. You need to take the iPhone to the nearest Genius Bar. That's the only solution that will reach an affirmative result.
http://www.apple.com/retail/locator/

Has anyone had issues with Microsoft Word or Excel requiring initial set-up again after a software update?

Has anyone had issues with Microsoft Word or Excel requiring a set-up after software udates? I do not have product key, so unable to set up again.

This laptop has original Microsoft word & excel provided by Mac when purchased and is legal copy.
Do I understand you bought a Mac and it came with Microsoft Office? I could be wrong, but I wasn't aware that was an option. Or am I not parsing that sentence correctly and you bought a Mac and bought a legal copy of Office to install on it? In which case, never mind.

I can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

TS1424 Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

HT4972 has anyone had issues syncing with microsoft exchange server since upgrading to ios 5.1.1

Has anyone had issues syncing with microsoft exchange since updating to ios 5.1.1

No bug I'm using exchange at work I've updated a couple of people here and it's working.
Your IT guy can't fix this for you? This problem usually is due to the exchange server not recogonizing your account. You have the right server and domain entered?

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Has anyone experenced issues after upgrading the lastest upgrades?

Similar Messages

Maybe you are looking for