Has anyone experienced a problem with FB posting since the installation of iOS 6?
Since the installation of iOS 6, I noticed that when I post a photo on FaceBook it does not show that post using my iPad or iPhone. I posted using my iMac and within seconds it showed up on two devices mentioned above. Please help.
Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch/Ipad/Iphone/Ipod Classic, so I will try to find a solution to your problem.
Do the IOS update (the one that is the latest)
Reset All Settings: SETTINGS>GENERAL>RESET>RESET ALL SETTINGS
Use it until it dies (automatically shuts off)
Plug into Charge
Leave it 1.5 hours or longer after it reaches 100% --> Undisturbed (preferably overnight)
Give it a few days to Calibrate
This has helped me on my Ipod Touch 4th generation, running IOS 6.0.1
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704
Similar Messages
-
Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless? I've had trouble and when I move the imac downstair it disappears. Help!
barryfromwashington wrote:
would putting up a metal shield by the meter help?
It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change. -
Has anyone noticed a problem with low/no volume after update to iOS 8.1.3 ?
HHas anyone noted a problem with low or no volume after update to iOS 8.1.3?
Although this reply is late. I just want to share that I have the same issue - no LTE after upgrade to 8.1.3 on my iPhone 5. No matter switch on/off iPhone or LTE option or Airplane Mode - they all didn't work....but after an upgrade to 8.2 today. I got my LTE back now after a month...not sure if it is a bug or a reset work. Good luck to anyone who looking for the resolution of same issue.
-
Has anyone had a problem with memory cards switching the file from EOS to EKS?
My camera memory cards have suddenly switched from an EOS file to an EKS file and are no longer readable. I don't know if the problem is my computer, my card reader, my memory cards, or my camera. It doesn't seem probable that two cards would become corrupted or go bad at the same time. I have two large capacity cards and two new high capacity cards that I haven't tried yet, but I'm afraid to try to use any of my other cards until I know what is going on with these two. The camera I'm using a 5D Mark II. Can anyone please help! This is a serious problem for me!
Thank you to everyone for your help and assistance!
Best regards,
WindsailsLightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?
Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!Hi,
Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now. -
Any Help would be appreciated.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Has anyone experienced a problem with iPad2 charging?
Help
Hi,
Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now. -
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later. Has anyone experienced this problem? Any suggestions as to how to correct it?
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Also, go to Settings>General>Usage>Manage Storage and see what is using the storage -
My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?
This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind. -
Has anyone have any problems with 5s "sticking"?
Has anyone had any problems with the 5s iPhone "sticking"? It's happened to me twice where I press the home button, and nothing happens.
Yes. Very sticky. especially the first time you go to click it after not using it for a bit. Mine feels similar to if there were crumbs underneath, or parts crunching together.
I just got off phone with Apple. I thought it was my imagination and being too sensitive until just now seeing other posts having same complaint. Apple rep on phone said it was not normal and for me to get it swapped out. -
Has anyone had a problem with iOS 8.1.3?
Has anyone had a problem with iOS 8.1.3?
If you are having specific problems they should be in your post.
For problems that have been discussed Go into the specific forum (easy way is to click on the highlighted forum under the posting in Content).
Using the Search to the right of People you can also search the forum to see if other have had the problem you have.
If you feel it is a bug - contact apple support or give apple feedback -http://www.apple.com/feedback/>Apple - Feedback -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
Has anyone had a problem with the letters literally rubbing off the keyboard?
Has anyone had a problem with the letters actually disappearing from the keybord, like being gradually rubbed out? My macbook air had this problem one year after purchase. They fixed it for free. Now, a year later, I have the same prob. Apple doesnt want to know.
I would be delighted with any suggestions, reactions etc. thanks in advance.I don't have to be doing anything or be anywhere near the computer.
The machine feels warm but i don't know if thats normal or not.
Imac, 20-inch,mid 2007
Processor 2 GB intel core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2400 XT 128 MB
Software OS X 10.8.2 (12C54)
No third party extensions that Iknow of -
Has anyone had a problem with depositing a check with the app for Bank of America?
Has anyone had a problem with depositing a check on a bank app?
Is the check something like a payroll check where its digitally printed and all in text?, or is it a handwritten check?
from my experience handwritten checks rarely work, myself and friends have always recieved an error stating the picture was to blurry no matter how many times we took a picture. From what i have read with others who have issues with depositing handwritten checks, some checks are deemed to blurry based on the handwriting, therefore the app wont accept the check, while other handwritten check will be accepted just fine, i hope this resolves your issue's and concerns
Maybe you are looking for
-
User Configuration/Policies/Administrative Templates - Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations - Allow Trusted Lo
-
Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this
-
How to change the Character Set from AL32UTF8 to WE8DEC
Hello!! I want to know how to change the character set in the database from AL32UTF8 to WE8DEC. I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8. I need to import tables from a ser
-
What is Reservations in MM & what are all the settings?
Hi SAP Experts, What is Reservation? what are all the configuration settings needs to be done to implement Reservations? can you please help me out by giving detailed information about Reservation? Kindly do on priority basis Regards, Somu
-
Recognize CSS on Local Machine
I use adbove dreamweaver CS6. Our header file is a .inc include. The .inc file contains the link to the css. How do I point to the css file I want to use for design purposes. The css file is text2.css I want dreamweaver to see it in local mode BUT I