Has anyone experienced a shaking screen image?

THE ENTIRE SCREEN SHIMMERS AND SHAKES FOR A SECOND AT SHORT INTERVALS.

It is a dell monitor. I switched this monitor out for an older dell monitor and experienced the same problem.

Similar Messages

Has anyone experienced Photoshop causing noisy images?

Everytime I start Photoshop CS6 dark images become clouded with white dots much like snow. The noise covers the images, but shows up best on dark areas and images. This has been happening over the last week, but I just realized in the last 24 hours that it was dependent on the PS CS6 application being active. As soon as I quit PS, the condition corrects itself and the snow/noise disappears.
I have a 15" MacBook Pro with Retina display running Mountain Lion (OSX 10.7.5) with 8G of 1600 MHz DDR3 Memory and a 2.6GHz Intel Core i7 processor.
Has anyone else experienced this?
Tom

It sounds as if your discrete GPU is going whacky on you when it kicks in - to verify that this is only happening when the discrete card kicks in, download Dody Krieger's gfxCardStatus which will show you the apps (and any hardware) dependent on the discrete card.
If it contines, you're under warranty and I would get the machine to an Apple Store or an AASP, well, ASAP.
Good luck,
Clinton

Hi, I purchased my 13" Mac Air last week and I got a black screen last night. It appeared to be in sleep mode but then suddenly woke up. Has anyone experienced this black screen problem?

Has anyone had your Mac Air get a black screen in the middle of working on laptop?

You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

Has anyone experienced a blue screen while the ipad appearently still works in thbackground?

has anyone ever had a blue screen iPad issue repaired and if so what was the price?

Have you tried to give your iPad a reset? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting.
If the reset doesn't help you can try a restore. If that doesn't help then if your device is under warranty and it's deemed to be a manufacturer's defect they should replace it for free. If it's not under warranty then the out of warranty replacement cost starts at 219 for a mini, 249 for a 2 and 299 for iPad 3+ (and more depending on the model)
You'd need to make an appointment at your local apple store if you go for the replacement.

Has anyone experienced a flicker issue on the lock screen?

I recently bought a 32GB iPhone 4 on 4.3.3 installed and there's a flicker on the bottom lock screen. Right before it goes to the lockscreen there is a slight flicker. Has anyone experienced this. Or can anyone look to see if they have this problem. I went to bestbuy and I usually go to the phones section with my cousin anyways to see the latest well there were iPhones out to see and I looked and the bestbut one had the same thing but I want to see if anyone else had this or knows a solution to this. Should I downgrade or what?
Thank you.

I did forget to mention I had a iPhone in November and It didn't have this problem. Im thinking it's firmware update bug. But idk

My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

This shouldn't happen. Take it back since it's new.

Has anyone experienced their battery in 3gs expanding, to the degree it pop's the screen? it, Has anyone experienced their battery in 3gs expanding, to the degree it pop's the screen? it

Has anyone experienced their 3gs battery "exploding" expanding to such a degree it pops the screen. Now the screen and back plate are at least an inch apart

Go to this discussion https://discussions.apple.com/thread/3718734?start=0&tstart=0 that even has pictures

Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?

Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
I have experienced this on iPad 1 as well as iPad 2.
Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly. This depends on what i have chosen the side switch to toggle. I am not sure what causes it. The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working". It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop).
Here is a thread that addresses the sound issue: https://discussions.apple.com/message/15263298#15263298

Its only for notifications.. it is not for sound from videos or music!

Has anyone else had a screen separation problem with the ipad?

Has anyone else had a screen separation problem with the ipad?

Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards.

Has anyone experienced Labview 8.2 crashing when attempting wire a cluster filled with object and task references?

I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG ‏156 KB

There are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals.

Creens from place to place.Has anyone experienced this

My ipad2 suddenly has an outline of a box that jumps from field to field on any screen displayed. Has anyone experienced this?

Go to Settings > General > Accessibility > Switch Control and turn this OFF.

Has anyone experienced light leak on their HP-TouchPad?

My son and I purchased a touch pad each. One was the 32 gig which I received, my son purchased the 16 gig model. He noticed that he has light leaks around the edges of his and that the home button seemed to be loose. Has anyone experienced this? If so what do you do to get this rectified.
Thanks
Kever
Post relates to: HP TouchPad (WiFi)

kever wrote:
My son and I purchased a touch pad each. One was the 32 gig which I received, my son purchased the 16 gig model. He noticed that he has light leaks around the edges of his and that the home button seemed to be loose. Has anyone experienced this? If so what do you do to get this rectified.
Thanks
Kever
Post relates to: HP TouchPad (WiFi)
I have very slight light leakage around the edges of my screen. But I only notice with during bootup. If you're noticing it during regular operation you may wish to contact HP Support. It's possible they may authorize an exchange for you. No guarantees, but it's worth a call if it's bothering you enough.

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing?

Has anyone experienced a shaking screen image?

Similar Messages

Maybe you are looking for