Has anyone experienced an unintended "find/replace all" in a document (using FM11) ?
Hi All,
Using FM11 with Windows7.
We have a problem with the following:
If I have completed a Find/Change All in Document A (then close the Find window), then I open Document B and press Control-F to perform a new search, once I start typing the previous word search/change all is applied to Document B when it's not the intention.
The problem is when Control-F is pressed the last function is highlighted (in this case "Change All") - rather than the word field, so nothing is actually being typed in this field - rather it performs the last function. The basic work-around is just to make sure we click or tab to the desired field before typing... OR make sure to delete the previous find/change text fields before closing the window. When doing things quickly though we may forget - so it gets annoying when we have to fix this or revert to last saved document.
Users with XP don't experience this. Each time control-F is pressed, the Find term field is the highlight so the new term is typed in as expected.
Any tips would be welcome.
Thank you,
Tina
Tina,
There's been a change in behaviour with FM11's Find/Change (as you've noticed). The dialog now retains focus after a search has been performed and is modal. However, the focus of the field for ctrl-F should place it in the Text area, regardless of platform, not execute the last operation. This is buggy behaviour and I just confirmed this on my platform (regardless of whether your in Doc A or B).
Please file a bug report at the FrameMaker Bugs & Wish List (https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=63)
Similar Messages
-
Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge. -
When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?
I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed. I tried 3 different brand new cards. All the same. Contact the support is advice I got.
-
Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?
Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691 -
Has anyone experienced a similar issue and was solved by replacing the HDD?
Does your qualify timewise (within 3 years of initial sale)?
http://www.apple.com/support/imac-harddrive/
If so, call them.
I had mine replaced last year. There are several reasons why a computer does not boot, so it is difficult to say if the hard drive was the cause. You can take yours to an Apple store and ask to have diagnostic tests run. Youc an also boot up from your backup and run Disk Utility > Verify disk on your internal to see if any errors pop up. -
Has anyone experienced regular adjustments to the sound and brightness done by the laptop itself?
I have a 2010 MacBook Pro i7, 15" notebook. Without adjustments by myself, I find the sound and brightness seem to regress to the lower levels. Has anyone experienced this and what have you done to fix it?
Well, well, well... Nothing has changed. Somehow or another Adobe has managed to truly take control of Windows 7.
I updated Bridge or more correctly... The Cloud did and every files extension in Bridge had 'none' as the application. Lovely stuff. Now All I want to know is why did Adobe take control of Windows file manager and cause this much grief?
I almost never use the clunky and often impossible to manage Bridge. Simple freeware... Irfanview is way more elegant than Bridge and 10 times more useful IMO.
Well thanks for the heads up Curt. I never considered the full implication of giving Adobe the freedom to add and remove whatever they wanted to... Forget the don't fix what isnt broken thing... Just pour everything we've got in the cloud onto all the members PCs, eh? Hard drives are cheap and hey, what are forums for when things go wrong if it isn't to keep Adobe informed of bugs they can silently fix and pour 'em back into the cloud as fixes.
Ha,ha you just gotta love progress eh?
This is really going to take on. I can see it now... For every mess up of a PC -- "THE CLOUD DID IT"!!! -
Has anyone experienced a popping sound coming from their speakers after the upgrade to 10.8.5?
Has anyone experienced a popping sound coming from their speakers after upgrading to 10.8.5? If you play something with sound (like iTunes or YouTube video) it goes away but then appears again after you wake up your computer from sleep.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected file to the Trash. You may be prompted for your administrator password.
Reboot and recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
I have experienced this on iPad 1 as well as iPad 2.
Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly. This depends on what i have chosen the side switch to toggle. I am not sure what causes it. The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working". It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop).
Here is a thread that addresses the sound issue: https://discussions.apple.com/message/15263298#15263298Its only for notifications.. it is not for sound from videos or music!
-
Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative
I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing? -
A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?
Thanks to the gentlemen, Messrs. Galt & rack0 tack0, for their timely replies. I failed to mention in my original post that there are upwards of 15 Apple appliances in our house-- from Apple TV to 4 Apple iPhones to 4 iPads to 2 MacBook Pros to 2 iMacs to a 2TB Time Capsule-- we're all Apple, all the time. We don't own a PC and that was what was hanging me up. I did confirm, incidentally that we're IP6 (although, honestly, that technical jargon didn't mean a lot to me-- hey, I learned something [sorta]!). Anyway, after much digging, I've finally determined that what was/is being identified as a PC, is in fact a Canon MX860 Printer serving the "old" 21' iMac-- thankfully, our recently acquired Epson XP-410 serving the "new" 27' iMac is identified as such. And despite the time spent, a few valuable things occurred along the way, including a firmware update related to the Time Capsule... learn by doing, I guess. Thanks again.
-
HT1688 Has anyone experienced the 3GS phone exploding when turned off?
Has anyone experienced the 3GS phone exploding when turned off and not in use after a period of time? Is so, what did you do to get it replaced?
I haven't, but thanks for asking.
Bring your phone to Apple for replacement. If you're in the warranty period, the replacement will be free; if not you will pay $149. -
Has anyone experienced bluetooth problem after iPhone 4 update?
Has anyone experienced bluetooth connecting problems in car after iPhone update for 4.
Hi Barosz2,
If you are having Bluetooth connection issues after a recent update to your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden -
Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG 156 KBThere are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals.
Maybe you are looking for
-
My Mac is showing a very high amount of used storage for photos
Hi guys, I'm starting to run low on disc space and decided to see how much of my hard drive is being used for what by using "About This Mac". My Macbook Pro is showing that I have used 164.62GB on photos. I've checked and my iPhoto library (which sto
-
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
-
Cisco 500 Series 802.1x Requirements
Hello, Does anyone have a guide on how to setup 802.1x on the Cisco 500 Series Switches. I have done the whole implamentation in the past with Catalysts and ACS. But would like to see a guide for the 500 series. Do we need the Cisco ACS or can we use
-
Hi, When I create a uix page with the wizard and try to run it. It does not show anything. I only see "Loading..." and that's it. Iam using Jdev 9.0.3.0 and uix 2.1.5 Can anybody help me????? below the code of my page <?xml version="1.0" encoding="wi
-
Satellite L doesn't boot up after restart or shutting down
Hello, My laptop after restart or shutting down doesn't starting. I need to turn off the computer and wait 10 seconds and try again, after that it start ok. Any suggest? Thanks, Dvir