Has anyone experienced glitches in the "Mail" with the download of Maverick?
Since downloading the OS upgrade Maverick I've had ongoing issues with MAIL. The MAIL 'program' will not QUIT in order for the machine to SHUT DOWN. Once an attempt has been made to QUIT it will not re-open either. It must be FORCE QUIT in order to SHUT DOWN. There are a few other anomolies as well such as the saving of a copy - or two - of an e-mail in DRAFTS after the message has been SENT. Or the e-mail showing up in SENT and later not being in SENT at all. I also had problems with PHOTOSHOP but Apple Support was able to help with this. I have deleted everything from my computer twice now and re-loaded all data once and only a portion of the data the 2nd time and re-loaded the OS but the problems continue. I have all kinds of Apple Support (2 1/2 years remain on my extended care) that I purchased when the machine was new in March 2012. With the report of this problem I was given a case # and spent 7 or 8 hours on the phone with Apple Support and one trip to the Genius Bar. After the problem was not cured I was told a senior Engineer would get involved after I sent Apple a 'snapsot' of my 'use' - which I did successfully, according to Apple Support. That was a little over a week ago and nothing yet. Can anyone suggest a solution or a place to go next?
Just in case it's related to my issue, check your accounts.plist file for duplicate entries. Mine had hundreds that I deleted and it solved my problem.
Similar Messages
-
Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?
Actually I restarted the machine (late 2009 27" iMac) and everything seems to be working, normally...
-
Has anyone experienced glitches?...
motion quitting unexpectedly...renders undone when imported into timelines...
jerking motion in keyframed clips...repeated"offline files" suddenly appear even though the files were not altered in any way? i've noticed these problems in FCstudio 5.1.2 and wondering if it's the program or the Imac ---hope that i'm not alone cause that would mean! I'M NUTS! or the computer needs a repair(then i WILL go NUTS!)---any feedback appreciated--No real idea - but try trashing the preferences of the programs involved and run "Repair Disk Permissions".
http://docs.info.apple.com/article.html?artnum=93690
Also use a Cron Maintenance utility like MacJanitor:-
http://personalpages.tds.net/~brian_hill/macjanitor.html
Check you have plenty of free-space on your Hard Drives.
Ian. -
Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?
Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691 -
Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge. -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
I have experienced this on iPad 1 as well as iPad 2.
Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly. This depends on what i have chosen the side switch to toggle. I am not sure what causes it. The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working". It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop).
Here is a thread that addresses the sound issue: https://discussions.apple.com/message/15263298#15263298Its only for notifications.. it is not for sound from videos or music!
-
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative
I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing? -
Has anyone experienced a flicker issue on the lock screen?
I recently bought a 32GB iPhone 4 on 4.3.3 installed and there's a flicker on the bottom lock screen. Right before it goes to the lockscreen there is a slight flicker. Has anyone experienced this. Or can anyone look to see if they have this problem. I went to bestbuy and I usually go to the phones section with my cousin anyways to see the latest well there were iPhones out to see and I looked and the bestbut one had the same thing but I want to see if anyone else had this or knows a solution to this. Should I downgrade or what?
Thank you.I did forget to mention I had a iPhone in November and It didn't have this problem. Im thinking it's firmware update bug. But idk
-
When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?
I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed. I tried 3 different brand new cards. All the same. Contact the support is advice I got.
-
Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG 156 KBThere are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals. -
Has anyone experienced strange beeping/buzzing in Lion, with bizarre vertical stripes?
Has anyone experienced strange beeping/buzzing in Lion, with bizarre vertical stripes? This has happened three times in Lion.
The SMC is the System Management Controller, it controls power flow to hardware in the Mac
For iMac and other desktops
-unplug the power cable and hold the power button for 10 seconds
For portables with removable battery
-remove the power cable and battery then hold the power button for 10 seconds
For portables without removable batteries
-connect the charger, press shift+control+option+power button
-The light on the charger will cycle from orange to green then back to orange -
My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?
This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind.
Maybe you are looking for
-
Rapoo Wireless keyboard E-6300 won't pair with iPhone 3GS
As the title says: Rapoo Wireless keyboard E-6300 won't pair with iPhone 3GS. Any ideas?
-
Uploading to iMovie with Canon DC10
I have a Canon NTSC DC10 Camcorder. I am trying to upload movies from it to no avail. iMovie doesn't recognize the file type. I've tried coverting the file using Handbrake also to no avail. Anyone have a suggestion?
-
Hi, I am trying to upload MS Word document into content management folder. But it is throwing an error message "XXXXXXXX not exist, or file is empty; you cannot upload empty files" we are on EP7 sp8. Is it problem with KM patch????? Points will be aw
-
[SOLVED] Ugly fonts in KDE plamoids
I'm running KDE 4.8 on my Arch 64 box and I've had for a while now ugly fonts in all the plasma widgets I'm running. All the other fonts look nice and smooth in all other places, eg. GTK and QT apps etc. but plasma widget fonts aren't as smooth for s
-
Hi I stumbled upon pptplex (http://www.officelabs.com/pptplex) which adds a great feature to powerpoint which allows you to present in a non-linear format - a bit like a mindmap, with slides categorised according to type... I'm reasonably new to Keyn