Has anyone experienced problems with outlook mail after ios6

Starting with the release of iOS6 I have had a problem with mail making it to my desktop. I never had this problem before.  The mail arrives fine on my iPad and iPhone, but it's not in my ourlook inbox.  Any ideas?  I have the iPhone 4 and the original iPad.  I have checked the settings and the "mail" option is set to "on" on both devices.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Similar Messages

  • Has anyone experienced problems with Outlook after installing Mavericks?

    Has anyone else experienced problems using Microsoft Outlook after installing Mavericks?  The computer seems to want to continue reloading emails.

    RobertRTillman wrote:
    1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
    2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
    3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
    4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
    In short, we are screwed and neither company seems to care.
    In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
    Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • HT5815 has anyone experienced problems with this update.

    After insaling it I cannot log on to my mac? had to restore to my latest timemachine backup

    Quite a few people have problems with every update. Almost always it is tied to third-party software incompatibility.
    If you run into a problem like that, boot into Safe Mode. If that succeeds, it is definitely a third-party software issue.
    http://support.apple.com/kb/HT1455
    Some company's just can't be bothered making their software compatible with each release.

  • Has anyone had problems with Apple TV after updating iTunes to 11.0?

    My Apple TV has worked well for over a year with home sharing and also mirroring from the iPad . This week I was instructed to update iTunes with 11.0. Since then the Apple TV with mirror the iPad but if I try to take a video to large screen it just stops. Is there a simple solution?

    i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

  • Has anyone experienced problems with their airport express since yosemite?

    Since updating to Yosemite, I am constantly having issues with my Airport Express.  It flashes yellow, indicating no connection.  I have attempted to:
    Soft Reset:  Unplug it (Airport Express) and plug in again
    Factory Reset:  Unplug it, push & hold the reset button with a paper clip while pulling it back in.
    A Tip From Another Site:  Unplug our Time Capsule we use as a router & the Airport Express, wait 3 minutes - then plug in the Time Capsule, wait another minute - then plug in Airport Express.  This worked for a very short amount of time, then the light started flashing yellow again.
    Again, I had no problems before updating to Yosemite.
    I look forward to & appreciate any help resolving this issue.

    Hi I have the same problem after upgrading to Yosemite
    I don't know why some times ping request to airport extreme is so long:
    64 bytes from 10.0.0.254: icmp_seq=3529 ttl=255 time=0.892 ms
    64 bytes from 10.0.0.254: icmp_seq=3530 ttl=255 time=0.875 ms
    64 bytes from 10.0.0.254: icmp_seq=3531 ttl=255 time=0.831 ms
    64 bytes from 10.0.0.254: icmp_seq=3532 ttl=255 time=0.802 ms
    64 bytes from 10.0.0.254: icmp_seq=3533 ttl=255 time=1.172 ms
    64 bytes from 10.0.0.254: icmp_seq=3534 ttl=255 time=0.951 ms
    64 bytes from 10.0.0.254: icmp_seq=3535 ttl=255 time=6.246 ms
    64 bytes from 10.0.0.254: icmp_seq=3536 ttl=255 time=26.014 ms
    64 bytes from 10.0.0.254: icmp_seq=3537 ttl=255 time=71.004 ms
    64 bytes from 10.0.0.254: icmp_seq=3538 ttl=255 time=117.939 ms
    64 bytes from 10.0.0.254: icmp_seq=3539 ttl=255 time=171.653 ms
    64 bytes from 10.0.0.254: icmp_seq=3540 ttl=255 time=207.489 ms
    64 bytes from 10.0.0.254: icmp_seq=3541 ttl=255 time=0.812 ms
    64 bytes from 10.0.0.254: icmp_seq=3542 ttl=255 time=0.670 ms
    64 bytes from 10.0.0.254: icmp_seq=3543 ttl=255 time=8.185 ms
    64 bytes from 10.0.0.254: icmp_seq=3544 ttl=255 time=0.935 ms
    64 bytes from 10.0.0.254: icmp_seq=3545 ttl=255 time=0.693 ms
    64 bytes from 10.0.0.254: icmp_seq=3546 ttl=255 time=0.793 ms
    64 bytes from 10.0.0.254: icmp_seq=3547 ttl=255 time=16.345 ms
    64 bytes from 10.0.0.254: icmp_seq=3548 ttl=255 time=62.348 ms
    64 bytes from 10.0.0.254: icmp_seq=3549 ttl=255 time=106.804 ms
    64 bytes from 10.0.0.254: icmp_seq=3550 ttl=255 time=152.399 ms
    64 bytes from 10.0.0.254: icmp_seq=3551 ttl=255 time=200.171 ms
    64 bytes from 10.0.0.254: icmp_seq=3552 ttl=255 time=1.027 ms
    64 bytes from 10.0.0.254: icmp_seq=3553 ttl=255 time=0.736 ms
    64 bytes from 10.0.0.254: icmp_seq=3554 ttl=255 time=1.033 ms
    64 bytes from 10.0.0.254: icmp_seq=3555 ttl=255 time=1.020 ms
    64 bytes from 10.0.0.254: icmp_seq=3556 ttl=255 time=0.981 ms
    64 bytes from 10.0.0.254: icmp_seq=3557 ttl=255 time=0.967 ms
    64 bytes from 10.0.0.254: icmp_seq=3558 ttl=255 time=0.866 ms
    64 bytes from 10.0.0.254: icmp_seq=3559 ttl=255 time=41.596 ms
    64 bytes from 10.0.0.254: icmp_seq=3560 ttl=255 time=86.209 ms
    64 bytes from 10.0.0.254: icmp_seq=3561 ttl=255 time=133.951 ms
    64 bytes from 10.0.0.254: icmp_seq=3562 ttl=255 time=180.552 ms
    64 bytes from 10.0.0.254: icmp_seq=3563 ttl=255 time=1.063 ms
    64 bytes from 10.0.0.254: icmp_seq=3564 ttl=255 time=1.345 ms
    64 bytes from 10.0.0.254: icmp_seq=3565 ttl=255 time=1.078 ms
    64 bytes from 10.0.0.254: icmp_seq=3566 ttl=255 time=0.945 ms
    64 bytes from 10.0.0.254: icmp_seq=3567 ttl=255 time=1.168 ms

  • Has any experienced problems with Parallels 9 after OSX maverick 10.9.5?

    After install OSX Maverick 10.9.5, Parallels 9 will not load..... any comments?

    Hey....
    Save yourself a lot of time and trouble..... buy the upgrade to 10....($50). I did this and "problem solved".....  I tried the Parallel's support before and they could not fix the problem on loading the original software... I had to use my own experience to get the product loaded.... I hope this problem does not present itself during other major upgrades....
    Lots of luck...
    wa4gwb

  • Has anyone experience problems with loading the latest Flash Play?

    Has anyone experienced problems with loading the latest Flash Player?  I have done this several times and the same results come up - Install the latest Flash Player.  I run Microsoft Vista.

    What is your browser?  If IE see
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!

  • TS1424 Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

    Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

    Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

  • Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • HT3529 Has anyone experienced problems sending pictures on message today?

    Has anyone experienced problems sending pictures on Imessage today? Even mail has been taking a long time to receive. I work near newark airport.

    Last I checked you could not access RoadRunner outgoing mail servers from outside of the RoadRunner network (i.e., the AT&T EDGE network). You can use cwmx.com as your outgoing mail server, with no ID or password, and that will work while you are on EDGE (but now when you are on WiFi).
    As for junk mail, that is the scourge of the internet. Many people have many solutions - I can share with you mine. I had all my email forwarded to a free GMail account. GMail has amazingly efficient SPAM filters, and it has cut down my spam 99%. You can configure your account on the iPhone using the "Other" shortuct in such a way that emails seem to come from your Roadrunner account. The added bonus is that the GMail outgoing server works on both EDGE and WiFi, so you dont have to worry about where you are at.

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

    Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

    iphoto upgrading: Apple Support Communities
    iphoto upgrade hangs: Apple Support Communities

Maybe you are looking for

  • Missing BitmapData class in code completion - Flex(FP10)

    I've setup my Flex Builder for Flex 3.3 SDK and Flash Player 10 as described in this article. I noticed that BitmapData class doesn't show anymore. Is this a bug? I took a snapshot of my flex builder code completion. Any thoughts on this? Thanks for

  • Does Time Machine back up other accounts too?

    Just curious to know if when doing a time machine backup, do I then need to go into other user accounts and repeat the process, or does the back up performed by the admin account do everything? thanks Lee

  • Flex User Level Handling

    Hi all, is there a profesional way of doing handling diffrent user levels.I mean suppose there are some work classes.L1,L2 L3..somthing like that. then, L1 user can do every function (add edit delete) L2 user can do some functions only..(add.edit) L3

  • Anybody at BI2014 Orlando? We can meet up..

    Have some general questions to ask about BI. I am here at BI-2014 orlando, If anybody is interested in meeting up, we can do. Thanks!! Prasith

  • Itunes tell me that i have to restore my iphone, how can i refuse ?

    hello, i'm french so i don't speak enlish very good sorry... I got a problem with my connection. Since 2 month, itune tell me that i have to restore my phone because it couldn't read it. I try to restore but 2 days after, it continue like before ! I