Has anyone experienced strange beeping/buzzing in Lion, with bizarre vertical stripes?

Has anyone experienced strange beeping/buzzing in Lion, with bizarre vertical stripes?  This has happened three times in Lion.

The SMC is the System Management Controller, it controls power flow to hardware in the Mac
For iMac and other desktops
-unplug the power cable and hold the power button for 10 seconds
For portables with removable battery
-remove the power cable and battery then hold the power button for 10 seconds
For portables without removable batteries
-connect the charger, press shift+control+option+power button
-The light on the charger will cycle from orange to green then back to orange

Similar Messages

  • Has anyone experienced an update download issue (42) with Illustrator CC (2014)?

    Abode Creative Cloud has been bugging me to update for a couple of weeks so I succumbed this morning.
    The first part was the Creative Cloud App which succeeded after failing a couple of days ago.
    I then clicked the install for the following in this order as they showed:
    Photoshop CC (2014) Successful
    Illustrator Cc (2014) Failed
    Premiere Pro CC (2014) Failed
    Dreamweaver CC (2014) Successful
    Media Encoder CC (2014) Successful
    SpeedGrade CC (2014) Failed
    That works out to 50%. Impressive!
    Anyway when I tried the "retry" as suggested "total failure".
    I tried again, by first closing the Creative Cloud App and reopening, but those 3 Apps still came up with the fail message and "Retry" button.
    I sure hope the Illustrator and Premiere Pro keep working for me until this mess has been sorted out; because I sure pay enough for the privilege.
    Once again Adobe CC has met my expectations!

    As the song goes ... "What a difference a day made Twenty-four little hours  ... "
    When I booted up my system this morning, I opened the Creative Cloud App and the "Retry" buttons had gone to be replaced with the usual clue "Install" buttons.
    Closing the Creative Cloud App yesterday did not have this affect, and it would appear my system had to be rebooted to reset the "Retry" buttons.
    I decided to click on one and allow it too update, before clicking on the next; although the App is designed that you can click on multiples and it will queue them.
    I believe yesterday's issue was a Creative Cloud App issue, although it did queue and update the other three updates without a problem.
    In the future I will likely not queue updates but do them one at a time just to see if my Creative Cloud experience improves.

  • Has anyone experienced long downloading times for moutnain lion

    hi has anyone had any difficulties downloading mountain lion...or found it very slow and long

    1.5 days here to download on high speed. I'm reading reports all over the internet that there is something wrong with App Store speeds. Go to another site, and everything loads lickety split.
    What is happening to Apple these days? From killed battery life on Macbooks, to a poor Maps release, to iPhone issues, to software mishaps like FCPX, to sweatshop slaves jumping off the roof because of Apple manufacturing conditions in China... This is not your daddy's Apple company any more. Quality control is becoming about as good as your B & D toaster.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?

    Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
    I have experienced this on iPad 1 as well as iPad 2.
    Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly.  This depends on what i have chosen the side switch to toggle.  I am not sure what causes it.  The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
    One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working".  It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop). 
    Here is a thread that addresses the sound issue:  https://discussions.apple.com/message/15263298#15263298

    Its only for notifications.. it is not for sound from videos or music!

  • Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

    has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image.  What's going on?  I've noticed this has happened in the past randomly with other clips and it's driving me cray cray!  Any help appreciated greatly and thanks in advance for taking the time

    In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
    Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
    MtD

  • Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

    Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook??  If, so have you found a solution??  Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

    I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives.  They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded.  I can't explain it, and I just make sure not to touch them at the same time.
    I have never had any sensation touching just one of the devices alone.  Is that what you are experiencing?

  • Has anyone experienced a flicker issue on the lock screen?

    I recently bought a 32GB iPhone 4 on 4.3.3 installed and there's a flicker on the bottom lock screen. Right before it goes to the lockscreen there is a slight flicker. Has anyone experienced this. Or can anyone look to see if they have this problem. I went to bestbuy and I usually go to the phones section with my cousin anyways to see the latest well there were iPhones out to see and I looked and the bestbut one had the same thing but I want to see if anyone else had this or knows a solution to this. Should I downgrade or what?
    Thank you.

    I did forget to mention I had a iPhone in November and It didn't have this problem. Im thinking it's firmware update bug. But idk

  • My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion?

    My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion installation?

    No, as I have yet to be convinced on Lion.
    Did a permissions repair help from the install DVD?

  • A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    Thanks to the gentlemen, Messrs. Galt & rack0 tack0, for their timely replies. I failed to mention in my original post that there are upwards of 15 Apple appliances in our house-- from Apple TV to 4 Apple iPhones to 4 iPads to 2 MacBook Pros to 2 iMacs to a 2TB Time Capsule-- we're all Apple, all the time. We don't own a PC and that was what was hanging me up. I did confirm, incidentally that we're IP6 (although, honestly, that technical jargon didn't mean a lot to me-- hey, I learned something [sorta]!). Anyway, after much digging, I've finally determined that what was/is being identified as a PC, is in fact a Canon MX860 Printer serving the "old" 21' iMac-- thankfully, our recently acquired Epson XP-410 serving the "new" 27' iMac is identified as such. And despite the time spent, a few valuable things occurred along the way, including a firmware update related to the Time Capsule... learn by doing, I guess. Thanks again.

  • TS1368 When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed.  I tried 3 different brand new cards. All the same. Contact the support is advice I got.

  • HT1688 Has anyone experienced the 3GS phone exploding when turned off?

    Has anyone experienced the 3GS phone exploding when turned off and not in use after a period of time? Is so, what did you do to get it replaced?

    I haven't, but thanks for asking. 
    Bring your phone to Apple for replacement.  If you're in the warranty period, the replacement will be free; if not you will pay $149.

  • Has anyone experienced bluetooth problem after iPhone 4 update?

    Has anyone experienced bluetooth connecting problems in car after iPhone update for 4.

    Hi Barosz2,
    If you are having Bluetooth connection issues after a recent update to your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Regards,
    - Brenden

  • Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking  only one non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

    Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking  only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

Maybe you are looking for