Has anyone experienced this error when syncing your iphone..."iphone could not be synced b/c the connection the iphone was lost"????

i have been trying to sync my iphone and keep getting the following error: iphone could not be synced as the connection to the iphone has been lost"....suggestions please.

Try one or more of the following troubleshooting steps:
Connect the phone directly to a USB port on the computer, not to a USB hub.
Disconnect all other USB devices except the iPhone, keyboard and mouse.
If it's a desktop or tower computer use a port on the back of the computer rather than the front.

Similar Messages

  • Has anyone seen this error when trying to Save As...

    In Acrobat X, after revising hundreds of links, I go to Save As... If I choose PDF... I get this warning instead of saving... "This document could not be saved. There was a problem reading this document (14)."  I have not tried all of the Save As options but the Save As - Reduced Size PDF... produces another error without saving.
    Has anyone else seen this? 
    I have figured out a work around - but it's still annoying....
    (Here's the workaround BTW)
    First of all the SAVE works so you can save the work you've done.
    In Bridge or Explorer make a duplicate of the file. Rename the file to what you want. Go in an make further revisions particular to that copy, Save and close. Now you have your Saved As...file.

    I should add that the pdf in question has a lot of interdocument links/buttons and a lot of links going to another pdf document. Both files are kept in the same folder.
    I'll try to answer any other clarifying questions.

  • Has anyone gotten this error when trying to connect to base station

    I am getting a -6753 error eveytime I try to connect to the base station via the admin utility. I've tried both soft and hard re-starts but to no avail. Any suggestions? Thanks

    Hi jpnscr,
    got a couple of these while setting up two Airport Extreme base stations. I got around this by a hard reset of each unit, and (ii) by using an Ethernet cable connection. For (ii), there was a really interesting difference between a brand-new simultaneous dualband AEBS which did require the Ethernet cable in one of the LAN ports, and an older Gigabit AEBS which could only be setup with the Ethernet cable in the WAN port. As long as I had the cable in the wrong port(s), I got the -6753 error.

  • TS1368 When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed.  I tried 3 different brand new cards. All the same. Contact the support is advice I got.

  • Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

    has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image.  What's going on?  I've noticed this has happened in the past randomly with other clips and it's driving me cray cray!  Any help appreciated greatly and thanks in advance for taking the time

    In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
    Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
    MtD

  • IPad (III) dies 4 weeks after Applecare ends. Has anyone experienced this?

    One of my iPad (III)'s "bricked" when I proceeded to update to the latest version of iOS 7. It just displays an iTunes logo and a picture of the adapter plug. Wjen I plugged it to my MBP and iTunes, I got the message that the iPad must be "restored" and there is no S/N displayed.
    It also happens to be about 4 weeks after the Applecare expired.
    Has anyone experienced this behavior?
    Thanks for your help.
    Naresh

    Just an update on my issue with the iPad.
    I observed a problem syncing my other iPad getting some error code -50. After a search on-line and the Apple Support I found a suggestion to change the USB - 30 pin cable then retry.
    With that change, my problem in syncing my other iPad went away.
    So I tried the same with the first iPad. Presto. I was able to restore the iPad with current operating system software then get all the apps etc. back.
    Still no answer why the first iPad went into a "retore" mode after "upgrading" to iOS 7.1.1.
    But lesson learnt, when having a connectivity problem, check cable as one of the items.
    Thanks again.

  • My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    This is not a problem I have only had with 7th gen. iPod.  I have had this problem with the 5th gen.  It goes back a few years.  Nike and Apple are aware of this.  Nothing has been done.  It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out.  It then shuts down and reboots.  Your mileage is lost.  So sorry.  Have a nice day.
    Love the other aspects of running with a nano (small and light weight).  I can keep it high and dry and out of the way.  Like the software.  Use it almost everyday.  Hate the unknown dropped runs.  I have logged over 2,000 miles with these devices.  Today I lost another 3 miles - probably the 30-40th time it has happened.  Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
    This probably occurs with my iPod once or twice a month.  Went to the Apple Store - three times.  The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy.  The problem returned.  I then upgraded.  The problem returned.  The third time they did a reset and it seemed to help.  Then, it returned.  But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . .  well, lame.  And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).   
    Oh, one other thing.  The Apple Store told me to complain to Nike.  Nike said their software is fine.  This is like dealing with General Motors or the government - but, worse.  Not my problem man.  See the guy over there.  Got it.
    I note that no one from Apple is jumping in the chain here with a fix.  So much for customer exuberance.  Generally like Apple.  We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . .  but, maybe Apple is an idea who time has come and gone, . . . like the wind. 

  • IPhone 6 recently stopped ringing and making text alert sounds since most recent upgrade to ios 8.1.1, has anyone experienced this, and if so, how did you correct?

    AFter recent upgrade to ios 8.1.1, my iphone 6 no longer makes text alert sounds and ring does not sound for incoming calls (except on car bluetooth).  has anyone experienced this, and if so, how did you correct?

    I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.

  • TS3833 I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    Right click the filename that won't download and selsct 'Get Info'. Look at the file path, does it have a //?// in it? That is a problem with Amazon downloads that prevent iTunes from finding the file. Use 'Add Folder' to add the album to your library and try syncing it again

  • I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later.  Has anyone experienced this problem?

    I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later.  Has anyone experienced this problem?  Any suggestions as to how to correct it?

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Also, go to Settings>General>Usage>Manage Storage and see what is using the storage

  • I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this?

    I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this, and any idea how I can rectify the problem?

    When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
    http://support.apple.com/kb/TS1567

  • My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    This shouldn't happen. Take it back since it's new.

  • Creens from place to place.Has anyone experienced this

    My ipad2 suddenly has an outline of a box that jumps from field to field on any screen displayed. Has anyone experienced this?

    Go to Settings > General > Accessibility > Switch Control and turn this OFF.

  • HT1688 My iPad is sending a notification of No Sim. Has anyone experienced this?

    My iPad is sending a notification of No Sim. Has anyone experienced this?

    I experienced this shortly after I got my iPad. I went to the AT&T store, they put a new SIM card in and it's been fine ever since.

  • Thinking about getting a new iMac to use as the main computer.  Has anyone done this?  What is your experience and recommendations?

    We have a 2009 MBP, 2010 MBP, 2011 MBA, an IPAD 2, and several ipods.  Currently, my 2009 MBP is the main computer, holding all the music and pictures.  This has used up the majority of the available storage and definitely slows it down some.  I do back up the full computer to a backup drive and also remove the large movie files to another external drive.  I'm thinking about getting a new iMac to use as the main computer.  Has anyone done this?  What is your experience and recommendations?
    I look forward to all responses.
    Thanks,
    Brad

    Thanks for your response.  I look forward to hopefully learning something new here.
    A good share of my music was added via my CDs, but now everything is added via itunes and occasionally amazon.  Almost all my pictures and video are added through my cameras via iphoto although I have added some with the 'add image to iphoto library' function also.

Maybe you are looking for

  • Help with java swing

    Hi people!i need some help Im a new user for java programming language.Well im programming an application using java swing libraries. I have some problems trying to accesing variables from those swing Jpanels. Ill make it clear.... Im using Netbeans.

  • TC Port Forwarding Static IP Address

    I have a domain for which I've pointed the DNS to my static IP address. My network flow is as follows: Internet --> Westell DSL Modem (AT&T) --> TC. I'd like TC to forward port 80 requests to a Mac Mini. On the Mini Web sharing is enabled. From any m

  • Summary row in tableview (including sorting and BYPAGE navigation)

    Hello everybody, I already found a few topics dealing with this problem but I wasn't able to find a real solution for this. So far I'm pretty familiar with table iterators but I have no idea how to handle the summary row to be the last line in a tabl

  • Random blank page generated at beginning of Epub

    Okay, so I'm using Indesign CS6 to author an epub document. Everything is golden except for one last issue... When I export the final file and look at the book on my iPad via iBooks, the first page is not the actual first page of my book. Instead it'

  • .Oracel DB from 9.2 to 11ir2 in Oracle Apps 12.1.3

    Hello Team .... I am looking for the process or documentaion to upgrade my Oracel DB from 9.2 to 11ir2. My application is Oracle Apps 12.1.3 and Windows version is Windows server 2003 Sp2 Rgds, Edited by: user10594123 on Mar 25, 2013 12:07 AM