Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?

Yes. After Windows/Bootcamp discovers your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
Then check the mouse drivers box and your device should work. (I located this solution on another thread)
It works for both the Magic Mouse and Magic Trackpad.
Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
It's Windows.

Similar Messages

Anyone using the magic trackpad with iPhoto 11 in fullscreen mode?

I love fullscreen mode in the new release of iPhoto. Does the magic trackpad make it more iPad/phone like?

To answer you question, no. I have the trackpad and it does NOT make the experience any different than it is on a laptop. There is NOT any iPad like gestures that are included in the Photo App on the iPad. I thought there would be some but unfortunately there are not magic things LIKE the iPad

Can I disable the internal trackpad if I am using the magic trackpad

I am using the magic trackpad with my 11" MacBook Air and want to disable the notebook trackpad. Is this possible. No obvious setting in the system trackpad preferences.

Yes, It's in System Preferences > Universal Access > Mouse & Trackpad tab > check "ignore internal trackpad when external mouse or trackpad present.
Regards,
Captfred

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Can i use the magick trackpad with the ipad?

can i use the magick trackpad with the ipad? and the iphone?

I'm looking for this same answer, I wonder if any new info. I've gone from posts saying why would anyone want to, and I now see that this is in the ATV section, which actually suits me because the setup I'm using it for is when I don't want to be up in my office on my iMac, but rather in the lounge in front of the big screen with my iPad mirrored to the Apple TV and bt keyboard connected. I wouldn't actually suggest anyone go out and buy a Magic Mouse or trackpad, but since I already have them would like to use it to make things easier when using my iPad as a mini computer with my TV as the screen. I can currently use the iPad to scroll no problem, but if I have to click somewhere specific then I must look at the iPad screen vice just moving a mouse or trackpad and having a pointer show up on my screen. Obviously if my iMac was much closer, I could mirror that screen and my keyboard and mouse would work just fine. (That is if my iMac was newer, but it's not, its a late 2009 model and that apparently is not new enough to be compatible with airplay mirroring.)

Has anybody figured out how to fix the battery consumption with mountain lion (using a MBP 13")?

I upgraded to Mountain Lion, and yes despite all of the warnings posted in the App Store reviews about the battery life being cut in half, I upgraded my MBP anyway. Chalk this one up to the Black Cloud of "I Told You SO!" My MBP could hold a charge for almost 6.5 hours. Now I'm luck if I can get 3, but in most cases I may get 2.5 hours if I'm conservative.
Has anyone figure out how to fix this battery problem? Even now after having it unplugged for almost 2 hours...I'm getting the "You are now running on reserve battery power" message. What a freaking joke!
Any help would be greatly appreciated!

Open /Applications/Utilities/Activity Monitor. Click %CPU until the triangle points down beside it. Make sure it says All Processes in the upper right. Check for applications taking up lots of CPU time.

Organizer 12 - how to zoom over 100%, compare images, use the Magic Trackpad?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

Hello Barbara and thank you for your answer.
I've ment side by side view. And it works by pressing F12 + cmd. Thanks.
Zoom & Pinch only works in the Editor, but not very well or smooth. And I couldn't tell you how often the Editior rotate my images unwanted ...
In the preferences of the Organizer, there is no point for a scroll wheel. And I'm really not able to zoom in the organizer over the "fitts in screen" size.
And I've found some more problems Sometime I'd like to export my images without any Exif/Metadata Information and resized. I haven't found any point do do so.
At the Moment, I'm thinking about switching back to Aperture, where I came from - I've tried to use PSE 'cause of Adobes Raw Converter, which is much much better with Olympus RAW Files than Apertures.

Any way to get the Magic Trackpad working in Windows 7?

Any suggestions?

I use MagicMouse on iMac with Windows 7 running (installed through BootCamp). Got sick of annoying horizontal scrolling. The solution described above has helped me to disable it. Here is what I've done in steps:
1) go to http://www.autohotkey.com/ and download an app (a script editor).
2) Install and run the program - please note that it will not open as it runs in the background
3) Rightclick on the desktop -> choose "New" -> "AutoHotkey Script" (a new script file will be created on the desktop) -> name it as you wish (e.g. "Mouse_HScroll")
4) Rightclick on the file you've just created and choose "Edit Script" from the menu.
5) Add these three lines below existing text in the file:
WheelLeft::return
WheelRight::return
#MaxHotkeysPerInterval 5000
6) Save file
7) Run "Convert .ahk to .exe" program from the package installed earlier and browse the file you've just created, hit ">Convert<" -> .exe file should be created. Run this file -> the scrolling should be disabled now.
7) You may wish to move this file to Start/"Autorun" folder, so it would be launched automatically each time you reboot your Mac/PC.
Hope this helps! Good Luck

Has anyone found a way to convert the Canon T4i raw files using Adobe DNG?

I just purchased the Canon T4i and us PE9. PE9 doesn't support the new raw format. I tried using Adobe DNG converter as Adobe recommended. That didn't worl either. Has anyone managed to convert these raw files so that PE9 will recognize them?

Steve,
Have you tried it or was that just from reading the description?
I noticed that the T4i seems to be omitted from the list shown on the download page and on the readme file. The full list of camera raw files supported does list the T4i as being supported by 7.1
See http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
I got hold of a sample raw file, which I processed by the DNG converter as was then able to open it in PSE 9. The file properties said that it was from a T4i. It could be that I got hold of an incorrect sample.
Brian

Has anyone figured out how to limit the number of emails displayed in the mail app?

There used to be a setting in Mail, Calendar, Contacts that would let you set the number, starting with 50 emails. I can't find this setting in iOS 7.

I do not know why one cannot use an artboard
in Illustrator it looks like this
In Photoshop it looks like this
As far as I can determine it has cropped the area properly as before, please explain what is missing?

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

How do I use the magic mouse with a windows pc

Is it possible to enable touch features of the magic when using it with a PC running windows 7?

Hi.
I've used the iMic myself, and I don't believe it is capable of doing what you are attmepting.
The iMic is designed to provide a USB input for an external microphone, and USB output for external speakers for your Mac. It has a mic input port, and a speakers out port.
Neither port is specified for use with a gaming headset (mic with headset on a single plug).
You will need to look elsewhere for a USB gaming headset.
I hope this is helpful.

Using the same library with multiple computers over a network Use Aperture

Hi Everyone. I am researching some cataloguing/editing programs to recommend one to my boss, and I was wondering if it was possible to use the same library between multiple computers on a network. Does anyone know if this is possible? This may be what makes or breaks the decision on whether or not to go with Aperture as we need a program that can access a large database of photos on multiple computers.
Thank you.

Welcome to the forum.
You can do it, but...
It's not supported by Apple.
Performance won't be great unless you're running a really fast network.
If more than one person tries to access the Library at one time you're likely to end up with a corrupted database, and there's no code in Aperture to limit access to one person at a time.
The Library must be stored on an HFS+ volume - don't even try putting it on a FAT32-formatted drive.
If you want 'proper' multi-concurrent-user network-enabled cataloguing software you're looking into a whole different level of investment than the low price of Aperture - think more in terms of thousands or even tens of thousands of dollars.
Ian

How to use the FP 3000 with windows XP?

Hi to all,
Actually I have a problem using My FP-3000 nifbus with a windows xp proffetional station.
previously I was using it with nifbus configurator and communication manager, both of version 2.3 and then I upgraded to 2.3.6 (using windows 2000) and now I am trying to use it with windows xp, but the configurator does not communicate with fp-3000 and it doesn't show any function blocks.
I started by installing the 2.3 configurator and manager, but the PCMCIA fbus/2 card that I'm using was not recognised by windows.
so I upgraded to 2.3.6, the pcmcia card was now recognised by windows but the communication manager kept giving a communication error.
so I installed the communication manager version 3.0, which started successfu
lly and the configurator started but the fp-3000 was not present.
I tried updating the firmware, but the upgrade.exe did not disfunctioned and gave strange module names in the window, and it did not download the firmware.
I also tried resetting the fp-3000 but still no luck.
so any one can tell me what software and what versions should I use to overcome this problem?

It sounds like a problem of advanced network parameter settings.
You can start "Interface Configuration Utility", choose the port and select "Edit", then choose "Advanced..." button to have "Advanced Stack Configuration" dialog.
Change values to:
T1 0x40000,
T2 0x40000,
T3 0x30000,
Slot Time 5
Click OK to close "Interface Configuration Utility", and run NI-FBUS CM or Configurator to check whether it helps.
If you have 3.0 or 3.1 version, you just choose the "Old Default" button to set the values automatically.

Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

Similar Messages

Maybe you are looking for