Has anyone figured out how to stop the 1022 from killing the spooler?

It used to be that when I'd print a PPT the spooler would crash and then none of my devices/printers worked. I never happened when the 1022 was unplugged.
Now, the 1022 kills the spooler as soon as I install it. I've see a number of discussions but no solution yet. I could really use some help.
Thanks.

Not yet....
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Has anyone figured out how to read pdfs online when message says Internet Explorer stopped working?

I can't open any links to a PDF from within a website. Has anyone figured out how to fix problem of not able to read pdfs online? I get message that says I"nternet Explore has stopped working". ANY ideas?
Message was edited by: base1fan

Hi,
It may be that you will need to 'reset' Internet Explorer, but you can certainly check if this issue is being caused by an add-on as follows.
Click the Start Menu, open All Programs, open Accessories, open System Tools and click on 'Internet Explorer (No Add-ons)'. See if Internet Explorer now runs correctly.
Let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Has anyone figured out how to scan from an HP officejet Pro 8600 after upgrading to OS 10.9.4

Has anyone figured out how to scan to a MacBook Pro with 10.9.4 from HP officejet Pro 8600?

iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
Karl

Has anyone figures out how to calculate "Duration" in iWork 08' yet?

I'm trying to now take all the entered days - and there respective total time in hours:minutes, and sum for one grand total in hours:minutes...
has anyone figured out how to do this in 08' yet? It would be extremely helpful!

Go to :
http://discussions.apple.com/thread.jspa?messageID=7958365
Yvan KOENIG (from FRANCE jeudi 18 juin 2009 21:49:05)

Can't figure out how to stop my MBP from opening programs at startup, namely word and messages

Recenty my MBPro has started opening MS Word and Messages at startup and I can't figure out how to stop it? I've tried selecting and de-selcting the startup option from the dock but this doesn't help. Does anyone have any suggestions?

System Preferences has a setting for this.
In the Users & Groups section you will fine a "Login Items" header. This is a list of all the programs that will open automatically when you log in. You can select any program and click the [--] button below that window to stop the program from opening automatically.

Has anyone figured out how to indent when using the iPad keyboard?

I am using iPad for meeting notes, but can't seem to figure out how to tab or indent when typing.

In notes all I can figure out is to put a space or two at the beginning of each line but in pages if you touch the paintbrush at the top right corner and then list, there's an indent button. In notes sometimes I'll use a – to help delineate the indent.

Has anyone figured out how to name or describe a clip ala "keyword" in the new imovie program for maverick?

I miss the old "keyword" way of identifying a clip when doing longer form things in imovie. Is there any other way to
name or describe a clip in the browser?
Morry Alter

iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
Karl

Mac Mini - has anyone figured out how to increase video RAM?

More and more websites are offering live feeds, particularly Indycars and CART, but the Mac Mini is functionally useless for this application offering only "Stop motion", which is great for Laurel and Hardy or Buster Keaton, but not quite the thing for a rapidly moving sport.
Has a hyper-intelligent mega being out there in Apple-land worked out a software patch to expand the memory capacity of the Graphics Card into normal RAM? After all the standard 64k is listed as "shared" memory, so could it be coaxed to grab a larger slice of the RAM cake?

I belive this would be in the same vein of folks who want to manually control the use of Virtual Memory in Mac OS X. In six years, no one's been able to engineer that feat.
My suggestion would be to buy a Mac that already meets your minimum requirements for your software.
-Doug

I am trying to send iTunes content from my MBA to Samsung LED SmartTV (7500) using DLNA. Has anyone figured out how to do this?

I recently purchased a Samsung LED SmartTV (7500) and am trying to watch TV Shows purchased from iTunes wirelessly. I know the WLAN connection is setup properly for the TV and MBA individually. I thought DLNA was supposed to setup the peer-to-peer link between these two devices. Do I need to download some special software to enable this on the MBA? Has anyone else managed to get this to work?

iTunes does not support DLNA. If your TV works only with a DLNA server, you'll need to find one for Mac that supports wireless connectivity and that can either read your iTunes library files or just access the track files. Otherwise, as Chris suggested, an Apple TV is another option and probably would be a lot easier to set up and use with iTunes.
Regards.

Has anyone figured out how to use EventCombMT to do "text" searches of server event logs? I doesn't seem to work.

I know I can do this in powershell, but gosh I don't need a complex powershell script to do what this eventcombmt gui does so easily for quick searches. I just wish I could figure out why text based searches of logs. For example, suppose
you want to search events for a user a server may have logged, if I type in "user1" nothing is retrieved and yes it's there. Searching for events works flawlessly but I can't seem to get text based searches to work.

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Has anyone figured out how to print through Airport Express with Vista?

My wife has Vista on her laptop and everytime we try printing through the Airport Express/Bonjour it doesn't work. It might print one page and then stop, but never any further.
The latest Bonjour is installed.
Is there anything else?

Was this printer ever at one time connected to the Vista PC directly ? also with Vista ive seen issues with bonjour printers. Its due to either the firewall of this new junk they added in called windows defender. This application ive seen various results from it like it thought my install of Gears of War was a virus and etc. One thing you could even try doing is turn off the windows firewall and see if this resolves this issue. Seeing as this computer is behind a "hardware" firewall such as a router anyways you wouldnt really need to have the firewall on unless you had a strong need for the extra security

Has anyone figured out how to serve iLife updates without an Apple ID?

I have a fresh new Mountain Lion iMac (10.8.3) with Server app installed running only Software Updates. I have successfully connected client computers that are now happily receiving updates for every program except iLife apps from my SUS. I only have 10.8 clients connected to this server. The installed iLife is what was preinstalled from the factory and I would rather not uninstall it to install from a retail disk. My deployed 10.8 clients number is rising quickly and most of these computers will not be assigned an Apple ID. Am I doomed to stare at iLife update notifications until the end of time? (Please read as humor ) Let me know if I have left out any pertinent information about my deployment. Thanks for your time!

From my view, you have two options.
1: Use one machine to get the updates. Then use tools like ARD, JAMF, Deploy Studio, etc, to push the updated apps out to all systems. They are self-contained app bundles. This should work. Be smart and run a preflight script to ensure the apps are not running, then copy the app bundle.
2: Uninstall the OEM, app store linked copies, and install from retail media. This is the route that I've chosen in numerous deployments. This can be done by following these instructions:
Step 1: Remove the installer receipts on the master image
sudo pkgutil --forget com.apple.pkg.GarageBand_AppStore
sudo pkgutil --forget com.apple.pkg.GarageBandBasicContent
sudo pkgutil --forget com.apple.pkg.iMovie_AppStore
sudo pkgutil --forget com.apple.pkg.iPhoto_AppStore
Step 2: Move the existing copies of iPhoto, GarageBand, iMovie to the Trash
Step 3: Install iLife '11 from the retail disk
Opt to install only the items that you need/want. In the test case, I ran iPhoto, iMovie, and GarageBand. Please note, the full iLife also includes iWeb and iDVD. These tools are considered discontinued and since many systems now have no optical drives, iDVD is highly marginalized.
Step 4: Run Software Update multiple times until nothing shows up
The drawback here is that if you have units in distribution already, this is not that easy. However, it can easily be scripted to occur in the background. I tend to pre-state the installer to devices and then execute to policies.
Now, this trick will only work until Apple released the next iLife product versions. At which point, we will not have a "retail boxed" copy to fall back on.

Has anyone figured out how to limit the number of emails displayed in the mail app?

There used to be a setting in Mail, Calendar, Contacts that would let you set the number, starting with 50 emails. I can't find this setting in iOS 7.

I do not know why one cannot use an artboard
in Illustrator it looks like this
In Photoshop it looks like this
As far as I can determine it has cropped the area properly as before, please explain what is missing?

Has anyone figured out how to stop the 1022 from killing the spooler?

Similar Messages

Maybe you are looking for