Has anyone figured out the deleted documents thing?

I NEED my documents back?! has anyone figured out how to fix this problem yet?

Could you please update to the latest version of Adobe Reader i.e. 11.2.3.
There was an issue on iOS6 due to which App was crashing.
Hopefully updating to the latest version will get your documents back provided you haven't uninstalled the app.
Thanks,
Ankit
Adobe Reader Team

Similar Messages

Has anyone figured out the sms:// url scheme yet?

I can't figure out how to prepopulate the body. I've tried sms://nnnnnnnnn?body, message and a ton of other things but none seem to do the trick.
Any ideas?

I don't have time to dig into this, but I presume you have the draft RFC available for reference?

Has anyone figured out the video driver issue with tx2000?

my tx2525nr is having issues... the screen works great for a bit then it starts to flicker and or go black, then it locks up and gives me a blue screen of death stating the atimag*.* driver is bad..i heard the issues is with the driver not compatible with win 7. so i changed back to vista premium. well it started again after i did all my updates. but worked fine until then... doesnt anyone know what driver to use?

On your iPhone go to Settings > General > Reset and select Reset Network Settings.
This will erase all wi-fi network settings from your iPhone.
If no change after that, try restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup. This will not prevent you from restoring the iPhone from the most recent backup later if no change after this.
If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, your iPhone has a hardware problem with the wireless card or with something else. The iPhone includes a one year warrranty.

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable?

Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable? I.e. I can reorder all the other desktops but I can't change the position of the very first one. I just don't use it becasue I am changing the order of my desktops a lot, and it's annoying to not be able to put any other desktop before Desktop 1. Thanks!

or my actual question is -- is there anything inherantly wrong with this approach.. i mean, if i can get it to make it through consistently, is there a problem with it repeating / updating the variable so many times in a row? is it a drain on system resources or can it break anything etc.?
Although I'm far from being an expert in programming, I would answer NO. Imho, you've just got a brillant idea! (As for “repeating / updating the variable so many times in a row”… you could add a short delay (like “delay 1”) inside the repeat block, but I don't think it's a must.)

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process??

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process?? What is the best/fastest way to give my client a teaser clip??

Still a 20 step process, many ways to approch it. Duplicate project and selectively delete everything around it. Or select and copy what you need. I think it could be a year before apple makes that step a 2 or 3 step process.

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Has anyone figured out how to scan from an HP officejet Pro 8600 after upgrading to OS 10.9.4

Has anyone figured out how to scan to a MacBook Pro with 10.9.4 from HP officejet Pro 8600?

iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
Karl

Has anyone figured out a way to watch HBOGO, with iPad2 to HDMI TV?

Has anyone figured out a way to watch HBOGO, with iPad2 to HDMI TV?, & actually get more than the HBOGO SPLASHSCREEN & audio? I am visually handicapped, & would like to see Deadwood & Enterage episodes on bigger screen..Thank you in advance! Jules

Whoever told you Elements 3 won't work in Leopard was simply wrong. It does. Elements 2 and Photoshop 7 will not work, Elements 3 and Photoshop CS1 will both work. My understanding is that the code for both the non-working ones was a kludge of the original code built for the Classic Mac OS to get it to run natively in OS X, and, since Leopard no longer supports Classic code in any way neither PS 7 nor Elements 2 will work, ever. Don't know whether that theory about the code is correct or not, but it sounds sorta reasonable. But whether that is the explanation is irrelevant: Elements 2 and PS 7 do not work in Leopard.
Why not do what I'm going to do: get off Adobe's gravy train. I'm going to buy Elements 6 when it comes out (which is about half what it costs to upgrade my CS1 to CS3), and spend some more quality time with the GIMP. No more upgrades of Photoshop for me.
Francine
Francine
Schwieder

Has anyone figured out a way to rename a dynamic time series member?

Our client uses trimesters instead of quarters or halfs in their financial reporting. We need to use dynamic time series but do not want to use Q-T-D or S-T-D members because they don't quite make sense to the client. We attempted to rename Q-T-D to T-T-D in the planning app repository unique names table but received an error. Has anyone figured out a way to rename a dynamic time series member or is it just not possible and we will have an alias that doesn't jive with the member name?

I think the option is probably to use an alias, you shouldn't really be trying to hack the planning tables as it is essbase that controls DTS.
Cheers
John
http://john-goodwin.blogspot.com/

Has anyone figured out a way to open Photoshop 7 in Leopard?

Photoshop 7 won't open in Leopard according to all the forums. But SOMEBODY must have a workaround besides booting into Tiger or upgrading (and dealing with Adobe's computer-specific registration). Has anyone figured out a way to make this work yet?
By the way, my old Photoshop Elements 3 will open in Leopard, though it's not supposed to either.

Whoever told you Elements 3 won't work in Leopard was simply wrong. It does. Elements 2 and Photoshop 7 will not work, Elements 3 and Photoshop CS1 will both work. My understanding is that the code for both the non-working ones was a kludge of the original code built for the Classic Mac OS to get it to run natively in OS X, and, since Leopard no longer supports Classic code in any way neither PS 7 nor Elements 2 will work, ever. Don't know whether that theory about the code is correct or not, but it sounds sorta reasonable. But whether that is the explanation is irrelevant: Elements 2 and PS 7 do not work in Leopard.
Why not do what I'm going to do: get off Adobe's gravy train. I'm going to buy Elements 6 when it comes out (which is about half what it costs to upgrade my CS1 to CS3), and spend some more quality time with the GIMP. No more upgrades of Photoshop for me.
Francine
Francine
Schwieder

Has anyone figured out a way to manage clients firefox prefs as plist?

has anyone figured out a way to manage clients firefox prefs as plist? I can't seem to find a plist to manage clients firefox prefs

What happens when you try to sync music to the iPod? The latest version of iTunes is compatible with all model iPods.

Has anyone figured out how to read pdfs online when message says Internet Explorer stopped working?

I can't open any links to a PDF from within a website. Has anyone figured out how to fix problem of not able to read pdfs online? I get message that says I"nternet Explore has stopped working". ANY ideas?
Message was edited by: base1fan

Hi,
It may be that you will need to 'reset' Internet Explorer, but you can certainly check if this issue is being caused by an add-on as follows.
Click the Start Menu, open All Programs, open Accessories, open System Tools and click on 'Internet Explorer (No Add-ons)'. See if Internet Explorer now runs correctly.
Let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Has anyone figures out how to calculate "Duration" in iWork 08' yet?

I'm trying to now take all the entered days - and there respective total time in hours:minutes, and sum for one grand total in hours:minutes...
has anyone figured out how to do this in 08' yet? It would be extremely helpful!

Go to :
http://discussions.apple.com/thread.jspa?messageID=7958365
Yvan KOENIG (from FRANCE jeudi 18 juin 2009 21:49:05)

Has anyone figured out...

Was just curious to know if anyone has figured out the screen capture yet OR if they Maxx even has one?! Thank you in advance

B33 wrote:
I agree with you there Cody21 an i will have to check out that app AZSALUKI whats the name of it if i can't find her any clues! thanks B33
He is referring to my post and the app I spoke of, which is No Root Screen Shot It.

Has anyone figured out the deleted documents thing?

Similar Messages

Maybe you are looking for