Has anyone fixed the following droid razr problems:

Has anyone fixed the following droid razr problems: 1. the phone won't let me answer calls, if the answering screen shows up it takes 5 rings;   2.It takes about 4 attempts to end a call, half the time I have to wait for them to hang up;   3. GPS will stop and freeze;    4. phone freezes doing simple tasks;    5. It won't flip through easily; 6. slow (deleted texts and photos and still slow); 7.deleted apps still show on phone; 8. battery life is about 3 hours if used constantly; 9. some people cannot call me; 10. typed text takes a very long time to appear on the phone.

Try this:
Wipe Cache Partition - DROID RAZR / RAZR MAXX by MOTOROLA
Performing a wipe cache partition will remove any temporary files that may be causing an issue with the device. All personal files and settings will not be affected by this option.
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and hold Power button. When the device screen goes blank, release the Power button while continuing to hold Volume Up / Down then proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen:
Press and hold Volume down.
Press and release Volume up.
Release Volume down.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.

Similar Messages

  • My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

    My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
    Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

    If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
    Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

  • Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and  computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance.  OK

    Has anyone seen the following on their WP?
    Message from webpage
    WARNING: Time Warner Cable Customer –
    Your Internet Explorer browser and
    computer may be compromised by
    security threats. Call 844-600-6224 now for
    IMMEDIATE assistance.
    OK

    This sounds like a virus or malware program that has made its way onto your computer.  I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system.  If this doesn't work, I would suggest  you use Microsoft's Malware Removal Tool.  You can download it at the link below.   Hope this helps.
    http://www.microsoft.com/security/pc-security/malware-removal.aspx

  • Has anyone fixed the safari / flash 9.1.1.5 problem yet?

    I can't pinpoint exactly when it started happening but after many months of trouble free browsing Safari suddenly started having a problem with many websites containing Flash content. Whenever we go to such a site (e.g. CBBC or Nokia N Series) Safari hangs and we get the dreaded spinning beachball. When this happens even Force Quitting doesn't recover the problem and we have to shut the MacBook down with the power button - very worrying.
    I've followed many of the othe safari threads and tried the following without any joy:-
    - uninstalling flash (using the official uninstaller) and re-installing it
    - Using firefox and camino instead of safari - they both seemed to suffer the same issue
    - repairing permissions
    - emptying caches
    - adding virus protection (random desperation!)
    Can anyone provide any insight an a solution please?
    Many thanks
    The Welshman

    Sorry to hear that you have crashing issues with Safari. Most people don't.
    If your Safari keeps crashing, or if you are updating Safari (or just have):
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-001.
    As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed.

  • Has anyone fixed the Headstart libraries for Forms 11 ?

    I have a 100% generated Designer - Forms application using the %65.pll headstart libraries - the so-called Headstart version 6.5i.
    Currently our production environment is running on Oracle Application Server 10.1.2. It works fine, however, because of several reasons (the underlying Oracle Portal environment is not working properly anymore on Internet Explorer 10) and continuous alerts that our customers may not use Java 6 and should upgrade to Java 7, we have to migrate to 11g.
    We have installed Fusion Middleware 11.1.1.6, upgraded Portal and recompiled all Forms modules and libraries. Also the Headstart libraries compiled ok. However, when we start a form we get the message that it has been created with an older version of Forms and it quits.
    The consequence is that i have to migrate the Forms as well with the tool frmplsqlconv. Sadly that fails on the Headstart libraries. For example these errors occur:
    CG$MESSAGE: The String CALL was found. If it is an occurrence of the Forms Built-In, It should be replaced with CALL_FORM.
    CG$_SHOW_KEYS: MENU_SHOW_KEYS changed to SHOW_KEYS
    CG$_PREVIOUS_MENU: The PREVIOUS_MENU Built-in is obsolete and will not compile.
    CG$_HELP: The MENU_HELP Built-in is obsolete and will not compile.
    CG$_EXIT: The EXIT_MENU Built-in is obsolete and will not compile.
    CGNV$FIRST_NAV_ITEM: BREAK changed to DEBUG.SUSPEND
    Does anyone have Headstart libraries with fixes for these errors?

    Hello Mark,
    the problem has been fixed...
    1) I tried to migrate the forms to 11g, but that can not be done with headstart... The fmb/pll files should be kept on 10g.
    2) The migration documentation is not complete: webutil has been installed completely (in other words, webutil is not migrated)
    So, steps are:
    1) Install webutil
    2) Recompile all libraries (including headstart and webutil)
    3) Recompile all menus
    4) Recompile all forms
    Then the Forms application works again.
    Java 7 update 21 is very dramatic. The "vendor" work-around can not be used anymore, like with previous Java 7 versions... It is unbelievable how amateuristic Oracle deals with Java. For me, Java in the client is dead as long as Oracle has the controls. So, the end of Forms is very near. If you are also looking for alternatives, check theformspider.com.
    Thanks for your help.
    Best regards, Jan Willem Vermeer

  • Has anyone gotten the following error message when trying to do in-app purchases? Error purchasing from App Store, then underneith that ,Cannot connect to itunes Store (0)

    I'm getting an error message when trying to make in-app purchases.
    Error purchasing from App Store
    Cannot connect to itunes Store (0)
    I can purchase songs in itunes, but not the in-app purchase for Kingdoms at War. I've checked the parental controls and all the other obvious things in settings. Let me know if anyone knows how to correct this. Thanks.

    Here is an update and more information:  I actually have two MBP's.  One is a mid-2009 model and one is a new, mid-2012.  I transferred files from the mid-2009 to the mid-2012, but I use both computers frequently.  This problem only occurs on the mid-2009 and not on the mid-2012.  I have authorized both computers. 

  • Has anyone fixed the ringer issue with 4s?

    I have tried the alcohol, the compressed air to clean the connection, the verification that the ringer tone is still available... anyone?

    Sorry to hear that you have crashing issues with Safari. Most people don't.
    If your Safari keeps crashing, or if you are updating Safari (or just have):
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-001.
    As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed.

  • Has Adode fixed the blu ray burning problem

    Still can't burn a br disc cs6

    >P.S. Adobe fix your software.
    Give Adobe a detailed bug report at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    The more details the better, to give the programmers help in reproducing the problem so they may find a fix

  • Has anyone with the iPhone had a problem with 7.3 itunes?

    I'm curious to know if people who bought the iphones have had the same problems with 7.3 itunes that seems so prevalent on the discussion board (like getting the error message in saving the library file, or frequent crashes).
    I'd love to know, because if not, then it seems as if 7.3 is designed specifically for the iPhone (supposedly the iPhones only works with 7.3), and that may be why the rest of us non-iphone consumers are having a miserable time with the upgrade.
    Can you iphone people let us know?
    thanks.

    I have an iPhone and since I've upgraded to 7.3, iTunes constantly stops responding and I've had to force quit. I've reinstalled iTunes countless times and deleted the iTunes preferences in my library file and while this works for 1 or 2 times, it soon does it all over again. Help!

  • Has anyone in the community faced this problem??

    While watching a video on my iphone 4s with 3g connection (sitting in my car with the engine shut off)
    for about 30/40 minutes (and after disconnecting the cellular data/3g) when i tried to start the car I found
    to my horror that my CAR BATTERY has completely drained off.with help of a friend I managed to recharge the battery and
    rode back home.
    Since I was very perplexed by this I decided to experiment.Yesterday I watched another video the same way
    and believe me or not the CAR BATTERY had drained off.
    Normally it starts fine the next day morning after overnight garraging, and also after I park it for nearly 8/10 hrs.
    during working days.
    Any light shed on the matter will be greatefuly acknowledged.
    tks and good day,
    Venkat

    iPhone battery is rated at about 1500mAhr. Car battery at about > 40 AHr. So in half an hour the phone has drawn about 0.75 AHr.  Hardly enough to flattena car battery so your claim is impossible

  • Has anyone solved the Apple Map App problem of no map data?

      I have a blank screen unless zoomed way out when continents are visible in very pale green.  When zoomed in, there is nothing visible at all, except the blue blob showing where I am, and oddly if I turn on traffic, then some traffic symbols appear.  It is impossible to remove then re-install the app, so is there anything else I can do short of restoring the iPhone?
    Thanks in advance for replies.

    Hi, bridgarw2.
    I would recommend closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps. 
    If the issue persists, see the section labeled Troubleshooting Maps in the article below. 
    iOS 6: Using Maps
    http://support.apple.com/kb/HT5429
    Cheers,
    Jason H. 

  • Has anyone received the following error after updating to the Yosemite 10.10.1/2 OS?

    *** Collection <_NSArrayM: 0x618001059620> was mutated while being enumerated.
    This issues arises when opening, editing, and placing contents in PS.
    Issue only visible within PS.

    Yes, it's a common issue in MacOS 10.10 affecting the open and save dialogs.
    Apple is aware of the OS bug and working on a solution.

  • Has anyone seen the following error when using Safari on IPad?

    http://www1.pcprotection72.co.cc
    Warning! Your computer is at risk of malware attacks.
    We recommend you check your system immediately. Press OK to start the process now...
    Safari is frozen, but I clearly do not want to click OK. Is there a way to Force quit Safari? Everything else on IPad seems to be working fine. Thanks.

    I have not seen that particular message but in no way is it good. To force quit an application; hold down the Power Button at the top until the "slide to power off" appears and then immediately switch from the Power Button to the Home Button until the application quits.

  • Hey All, Has anyone seen the following error message

    "Service 'Apple Mobile Device' failed to start, verify that you have sufficient privileges to start system services."

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • Has anyone had the problem with their iPhone 5 where some people cannot receive texts from you?  And if so, is there a fix?

    Has anyone had the problem of not being able to send texts to certain people? 

    Here is another screenshot.  In this example, I did 'Get Info' on one of the goofy ones, and it shows that this Wolfmother song is sorted by the Eagles.  ***? 

Maybe you are looking for

  • VPN Tunnel setup - can't ping either endpoint

    So I was given the task to set up a new VPN tunnel for a client and even though I've basically made it open, we still cannot ping each other's endpoints. I troubleshooted for over an hour with one of their techs, still to no avail. I included the con

  • Crash with hard disk errors (ATA exception)

    My Arch just crashed displaying in a TTY errors like this: [ 24.229347] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 24.229397] ata2.00: irq_stat 0x40000008 [ 24.229426] ata2.00: failed command: READ FPDMA QUEUED [ 24.229463] ata2.00:

  • Images not exporting to Ebook (for Kindle) correctly

    Using export to kindle plugin, on mac OS 10.6.8, InDesign CS5 When I export to Kindle (from the Book panel) using the following settings: (Options selected: Images > Copy Images > Optimized > Formatted > Image Conversion > Automatic) and preview on t

  • IBNS with ISE, authorization issue

    I'm running the 90-day ISE demo and trying to configure IBNS with it. I love the feel of the interface and almost instantly had a set of policies up and working fine. My issue is this: I have an authorization service for machines so before a user log

  • Reg .Calling a Bapi F.M

    Hi Everyone, Iam very new to Bapi . Any one can tell me how to call  "BAPI_SERVNOT_CHANGEUSRSTAT" this Bapi , what parameters i need to pass if any one give some idea on this its very helpful to me. Thanks , Narasimha Moderator message: sorry, these