Has anyone found a solution to avoid Photoshop crashes when trying to adjust print settings?

Photoshop CS-5 shuts down when I attempt to adjust print settings such as selecting paper profiles. The Adobe forum suggested installing the latest print drivers and updates to CS-5. The updates did not fix the problem.The printer is an Epson 4880 but I have simile problems with other printers. Have two iMacs with the same problems. I have a Mac Book Pro that I did not update to Yosemite and it works.

I myself having this problem, and the solution for this not yet come. But what i do to solve this problem is that , i just import the picture edit on photoshop, to my browser based Photoshop Online Free Editor, and then give print command from there.

Similar Messages

  • HT204387 Has anyone found a solution to bluetooth pairing iPhone 6 with Toyota Camry volume settings?

    When using the iPhone 5 and pairing with 2013 Toyota Camry, the bluetooth settings are normal. 
    When changing to an IPhone 6, there is a problem.
    When the phone goes to bluetooth in the car, the volume setting is triggered to increase to top volume of 60.
    When we change the setting via directions of Toyota to change the phone volume, the volume goes down but is not reset.
    When the phone is paired upon entering the car, the volume goes right back to 60.
    Toyota states they have not tested the new phone yet and do not have any solutions.
    Help?
    Linda

    Hey avparthas,
    Thanks for the question. I understand that you are experiencing issues with a bluetooth accessory. The following resources outlines relevant troubleshooting steps that may help to resolve your issue:
    If you can’t use a Bluetooth accessory or car kit
    http://support.apple.com/kb/ht6473
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks,
    Matt M.

  • 24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?

    I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated

    Hi 517 Design, 
    Thanks for visiting Apple Support Communities. 
    If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Best Regards,
    Jeremy

  • Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

    Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

    thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

  • HP PSC 2355 Has anyone found a solution that worked ?

    Re: HP PSC 2355 all in one
    Has anyone found a solution that worked?
    This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
    Any help would be greatly appreciated.
    Thank-you,
    Steve
    iMac G5   Mac OS X (10.4.7)   iMac G5 1.8GHz, 20in.

    Re: HP PSC 2355 all in one
    Has anyone found a solution that worked?
    This printer used to work fine with Tiger – after a
    lot of headaches setting it up. Seemingly, after
    downloading a latest 10.4 up-grade, I lost all
    functions with this 3 in 1 printer. I’ve done all the
    procedures on the HP site, purged everything HP on my
    computer relating to applications, and re-installed
    the software. However, the printer does not show up
    on the ‘Printer List’ in the ‘Printer Setup Utility.
    Error message stating that ‘No default Device
    Detected’ or, Error ‘Sorry, scanner could not be
    initialized. (Scanner not found.)
    Any help would be greatly appreciated.
    Thank-you,
    Steve
    iMac G5   Mac OS X
    (10.4.7)   iMac G5 1.8GHz, 20in.
    I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
    And by the sounds of it i know you have gone though this document already
    Download this driver it is the lates driver and it fixes alot of things
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
    G4 Mac Mini   Mac OS X (10.4.7)  

  • I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it. Has anyone found a solution for this?

    I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it.
    Is there an email app that I can use?
    Has anyone found a solution for this?

    This seems to be an annoying part of the newer OS.  When I first got my Pearl in 2008, I didn't have that occur.  However once the OS got upgraded, and now with the Tour, it seems like that is the way it works.  Not clear to me why they would have thought this is preferable.

  • Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

  • Has anyone found a solution to the login problem with Lion?

    I upgrade my 27" iMac Quad-core last week to Lion and everything was fine. I shutdown after a software upgrade and now I can't log in. Of course, Apple support is closed. I tried a number of the solutions on this site to no avail. Has anyone found a solution? *** has apple done to my system?

    Don't know if my problem is same as yours..after Lion install, frozen cursor in password field when logging in after starting up, beach ball. Couple of trips to Apple store, a number of phone calls to troubleshoot with Applecare. The last fellow who helped me found a workaround, just can't log in. He said engineers have reports of others with this problem so it's not just my machine but fix would probably come in software update. Been dealing with this since first week of Lion download. Hopefully they'll fix it eventually. I can use macbook now, but don't like not being able to have a screen login via password. No plans to ever again download a new op system on a mac...had no trouble installing win7 on older dell from vista.

  • I upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work.  i get an error message "temporarily unavailable".  has anyone found a solution to be able to listen to podcasts?  thanks

    i upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work.  i get an error message "temporarily unavailable".  has anyone found a solution to be able to listen to podcasts?  thanks

    I have the same problem, but don't expect Apple to help! I rang their help line and explained the situation and that the same experience is reported all over their forum and they would not assist unless I paid for a one year help subsciption.
    This company has lost the plot! They create software that universally will not work then expect customers to pay to have it fixed. Technically I should walk straight into the nearest apple shop and ask for a refund, as the device is no longer fit for purpose!
    Congratulations Apple for the best ant-promotional App on the market and your astounding lack of service ethos.

  • After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

    after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

    Doublechecking. Have you tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • I cannot log into my Facetime or iMessages. When I bought this iPad2 in November everything worked. This is extremely frustrating. Has anyone found the solution?

    I cannot log into my Facetime or iMessages. When I bought this iPad2 in November everything worked. This is extremely frustrating. Has anyone found the solution?  

    I can still access the internet. I can still log into my iCloud. I reset my network settings and restored my iPad twice already. I tried all the stuff I could find on YouTube to include changing my DNS setting to 8.8.8.8 I don’t know why I can’t log on. I bought the iPad in Germany and it worked. When I came back to Turkey where I live it worked. I took a trip to the states in December and it worked. Now that I’m back in Turkey, I can’t even log on. For both the facetime and imessage I get a message that says “ Could not sign in. Please check your network connection and try again. I tried to all the help line twice and they couldn’t even help me. I just bought this in November and don’t know why it’s not working……….Help if you can. Thanks for the response.

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • Photoshop crashes when trying to start program

    Photoshop crashes when trying to start program
    Using Powerbook G-4
    10.4.11
    15 GB available
    When trying to open Photoshop it crashes when
    the display window is trying to open and the text:
    BUILDING MARK TWAIN
    is showing. Then it crashes never making it to
    the actual program.
    I've tried uninstalling the program and installing
    the program several times with no luck.
    Thank you for any advice or tech support,

    This is actually Photoshop Elements forum. try posting it on Photoshop forum.
    In case you have some scanner/printer etc installed in the machine it might be causing issue. Try launching with none of the devices attached and anti virus disabled.
    -Garry

  • Has anyone found a solution to the issue of default email account on iPhone continually changing?

    I am seeing an irritating problem with the default mail account, calendar and contacts list on my iPhone 4.
    Every so often (I think it happens randomly after syncing or even just connecting the iPhone to my iMac without syncing) I notice that some or all of my default email account, calendar and contacts list have changed away from my desired default (which is my Exchange account).
    The iPhone is running iOS 4.3.5 (8L1) and I'm using iTunes 10.4.1 on my iMac.
    I found this discussion: https://discussions.apple.com/thread/1639451 dating back 2 years to the days of iOS 2.1 without any solution. Googling hasn't helped me find any answers yet.
    I have 5 accounts set up on the iPhone - a MobileMe "Find my phone" account that's only used for that purpose, not email, a GMail account, a couple of vanilla IMAP accounts and my main, Exchange 2010-based account that I use for mail, contacts and calendar.
    Most frequently after a change I find that the default email has switched to the GMail account, the calendar and contacts lists have switched to my iPhone and most of my Exchange account mail folders are empty and have to re-sync when I tap on them.
    I know from Googling that other people have been seeing similar issues.
    Has anyone found a workaround or solution?

    Has no one found any solutions to this?
    Or at least what causes it (so that it might be avoided)?
    I find it difficult to believe this issue has existed so long in iOS without being addressed!

  • Has anyone found a solution to fixing the FileVault "encryption paused" error?

    I got my Macbook Air in mid January 2015. When I set it up I decided to enable FileVault but after a few minutes the encryption failed and now it will not continue and complete, even when I have my computer on and plugged in. I have seen many different possible solutions, but none that really worked well. Has anyone found a good solution to the issue?

    Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

Maybe you are looking for

  • How can I assgin a master feild value in combobox bind variable in the detail

    Hi All, I'm working on a MD-Form in portal. I want to pass a master block value in the dynamic combobox where clause. Combo box is in the detail Block. Can anyone please give a solution for this? This a very urgent Requirement for me. I really apprec

  • Wireless Mouse Problem - Losing its "connection"

    Every couple minutes my wireless mouse loses its "connection".  Once the computer acknowledges the loss with the little message at the bottom of the screen, it quickly reestablishes the connection.  Since this started happening last week, the frequen

  • ASM instance deletion and converting to RAC

    My RAC setup is little complex, i created 2 RAC servers, after that i created 2 new RAC servers, but the shared disk is same, in old RAC i created RAC ASM, which is running fine, in new i make want to create new RAC ASM instance, but when i got to db

  • Save parameters for the session

    Hello, I  am using WDP CE 7.2 and wants to store parameters in the memory for the session: In Wdp 7.0 we used: IMaintainScope maint = Utils.getScopeMaintainer(WDScopeType.SERVERSESSION_SCOPE); maint.getScope().put(<  Some object >); I cant find this

  • Password Profile Parameter

    Dear All, Kindly advice, We have recently changed the instance profile parameters for enabling the password policy. The parameters that we changed are login/password_expiration_time 60 login/min_password_specials 1 login/min_password_lng 8 login/min_