Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?
Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.
thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.
Similar Messages
-
How do I retrieve both user name and password?
The details of the procedure depend on which version of Mac OS X you have. This video however, covers most of the recent versiona. Good luck:
https://www.youtube.com/watch?v=CJ6AZMk2cy0 -
His computer is not working since Firefox updated it (in the middle of when he was trying to do somethine else) Help
His computer is not working since Firefox updated it (in the middle of when he was trying to do somethine else) Help
-
Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.
Hi i had this problem myself what you need to do is..
right click and press 'show view options'
then go to the arrange by and sort by options near the top and change them both to none
click save as defult at the bottom
then when you right click the clean up by options will now be there
hope this helps -
I bought pages on the app store and have math type installed. However I am do not have the option to "Insert > Mathtype Equations" either with right click or the drop down menus at the top of the screen. I also have OS Lion installed if this makes any difference. Please help!
I assume but I can't check that MathType rely on the standard iWork applications location which isn't the one used by the mac App Store.
Create a subfolder named iWork '09 in the Applications folder.
Select the iwork applications which you own then drag them into the iWork '09 folder.
You will be asked to type your password. Don't worry, it's normal.
It's required because the System must store the infos describing the new location so that, if a new revision is delivered, mac App Store will be able to find the apps where they are.
When this will be done, try to re-install MathType.
I guess that this time it will behave flawlessly.
Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 16:48:19
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space. -
How to send a mail in workflow keeping 1 receiver in CC and the other in TO
Hi,
Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
I need to send a mail to an employee keeping his/her manager in CC through workflow.
Regards,
LavanyaHi Lavanya,
I dont think its possible using Send mail step type.
But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
Thanks,
Viji. -
When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?
Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files
-
Right click with mouse in Word 2013 does not give the list with translate and synonyms etc
since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate.
it does work if i touch the screen.
i moved to mouse mode but it does not help
can anyone help...
i am starting to hate windows 8.1 and word 2013 because of this feature not workingHi
I have tested in my computer and it worked well.
Normally when we type a wrong spelling, right clicking the word does not give a list with translate and synonyms.
Check to make sure your spelling is right.
if the issue persists, Start Word in safe mode to check the issue:Hold "Ctrl" key and click into the program.
It is also recommended that you do a repair for your Office suites in
Control panel>Program and features>Office>Change>Repair
Thanks
Tylor Wang
TechNet Community Support -
Hello,
The resource filled his/her timesheet in PWA.
Now :
What are the differences between Turn in Final Timesheet
and the other option: Send Progress for Selected Tasks?
ThanksYou are partially correct and partially wrong.
Turn
in Final Timesheet sends
the timesheet to the Timesheet Manager for Approval
but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
Yes
after approval progress will be available in MPP as well as in Projectweb app as % complete .
Send
Progress for Selected Tasks
Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
app as % complete.
In Send
Progress for Selected Tasks Timesheet
Manager doesn't receive anything in his Approval center
because all the update directly go to Status manager Approval center.
Here you have to understand
that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
actual approval)
kirtesh -
Can someone take the eyes of one photo and move it to the other? . we took family photos and his eyes are all squinting except in 1 photo and my wife wants those eyes on the a different picture. please email me at Dunworth.m Gmail and i will send you the photos. i can pay pal you like 5 bucks apon completion
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
Question
I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.
-
My IPad has one half of the screen with vertical multi colored stripes and the other half is normal. Has anyone had this problem and if so is there a solution?
You could have a hardware issue, but try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I have a new Airbook and I cannot seem to right click to copy, paste and the other options?
Hey Everyone... Can someone please tell me how to get my right click working on my trackpad? On my mac book pro it works but on this airbook nothing happens when i right click.. to do any of my wanted options I have to highlight then go to the edit menu.!
Thanks Tammyyou can right click wither by Clicking or tapping with two fingers, or clicking on the bottom right corner of the trackpad. you can change this by going into System Preferences, Track Pad, Point & Click, Right Click.
alternatively you can always do a normal click while holding down Control. -
I have 2 gmail boxes on my MacBook Pro. One is mine and shows as Gmail and the other is my husband's which shows as his email. When I send an email, it has my email address in the From line automatically, but when someone replys it comes back to my husband's email box. How wo I fix this?
I have this exact problem. I have 3 email addresses on my mac and I can select one, and the email still be sent through another account and I won't know it until I get a reply for that email in one of the other accounts.
MacBook Pro, Mac OS X 10.9
Maybe you are looking for
-
Hello everyone, I've checked the many questions and posts on KVM switches, but none seem to address my variables, so I'm hoping someone can provide some recommendations, or confirm that I can't do what I'd like to do. I have two primary macs, and a c
-
648 max, Win98 NDIS.vdx driver prob?
Just installed Win98 on my new 648 Max. It installed ok, but on statup it says error: NDIS problem (forget the exact wording), you must restart computer. I bypassed NDIS.vdx with safe mode step by step start, and removed Dial up Network in control pa
-
Downloaded iOS 7 and now cant sync to iTunes
I just downloaded iOS7 via wifi because I use iTunes is 10.6.3. I cannot get iTunes 11 becuase my macbook is OS X 10.5.8. Now that my phone is the current version, I can not connect it to iTunes. Any suggestions aside from getting a new computer?
-
I am creating a car driving game in Flash 8. Im using the Drawing API to make the car leave tracks as it moves using the following method: lines = {} _root.createEmptyMovieClip("pen", 10) pen.lineStyle(10, 000000, 6) pen.moveTo(this.car._x, this.car.
-
Can anyone please tell me how to reset the password in "Lolales Bachup Verschlüsselt"