Has anyone get AM7.x login page work on blackberry?

Was trying to use AM7.0 and 7.1 login on a blackberry. The page display ok, however, after the credential is submitted, the system always returns a "authentication failed" page and there's no request from AM to LDAP for user authentication.
Has anyone got the AM login working on blackberry? Would appreciate if anyone can shed some light on this.
Thanks

The Web server (running the Web Site) encountered an unexpected condition that prevented it from fulfilling the request by the client for access to the requested URL. This is a 'catch-all' error generated by the Web server. Basically something has gone wrong, but the server can not be more specific about the error condition in its response to the client. In addition to the 500 error notified back to the client, the Web server should generate some kind of internal error log which gives more details of what went wrong. It is up to the operators of the Web server site to locate and analyse these logs.
What that means there are generally two causes of a 500 error. Either a server is down (in which case you wouldn't be able to put the files, so that probably isn't it) or a server side function isn't working properly (PHP, or ASP).
There should be a server log which details the error more specifically.

Similar Messages

  • Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

    Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.

    When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
    Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?

    Thank you for your help.
    I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
    In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
    Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
    Hope this helps others that it just might be your hard drive failing.

  • Problem in getting the application login page

    Hi Firends,
    I am facing problem in getting the application login page.
    http://localhost:7777/pls/apex/f?p=102:1
    when i am clicking this link it is not directing me to the login page for this application.please let me know what could be the reason behind this.
    Thanks in advance

    Hi Martin, many thanks for replying. Let me know how this could effect in not getting the login page. I have checked in my application,it is by default "No application authorization required " and other option is " must not be a public user " . Should i change it to " must not be a public user from no application authorization required"
    please put more light on it. Y i am saying this because it was working fine day b4r yesterday but today i am getting problem in finding the login page of my application aftr providing the url. i am following the SSO authentication scheme and under Home>Application Builder>Application 102>Shared Components>Edit Security Attributes , i have given f?p=&APP_ID.:1:&SESSION. as home link and under Home>Application Builder>Application 100>Page 101>Edit Page Process, this code i have provided
    wwv_flow_custom_auth_std.login(
    P_UNAME => v('P101_USERNAME'),
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v('APP_SESSION'),
    P_FLOW_PAGE => :APP_ID||':1'
    as a source code.
    i am really stucked into it, and i need to finish is ASAP. Please provide all possible reasons for this problem.

  • When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login. What should I do?

    I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
    Please Help!!

    Somewhat similar problem:
    Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual.  Drives me mad.  It doesn't happen with a fresh Lion installation, nor if booted into safe mode.  On the machine in question it also happens to new user accounts.
    I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences.  I've removed Little Snitch and PeerGuardian (no more third party kexts).
    @Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
    Any ideas would be gratefully received.
    Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway.

  • Can anyone get the SimpleVideoPlayer demo to work with 6u13?

    I have tried it on a Vista machine and a Windows Server 2003 machine both with Java 6 Update 13 and the result is the same:
    playing http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv+
    Error with Media: MediaError: media unsupported:com.sun.media.jmc.MediaUnsupportedException: Unsupported media: http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv+
    * mediaSourceURL=http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv*
    Can anyone get this demo to actually work? If so, what's the secret?
    Thanks,
    The Gibbon

    Can someone please try it and let me know?
    This is the link:
    [http://javafx.com/samples/SimpleVideoPlayer/index.html]
    Thanks,
    The Gibbon

  • Anyone get iZotope Vinyl UB to work with the following...?

    Anyone get iZotope Vinyl UB to work with the following...?
    I keep getting an error -1 when I try to load it in Logic pro. I tried emailing iZotope about this but never got any response. Any help would be appreciated.
    I'm running:
    50gb HD space available.
    3GB Ram
    Power PC Dual 1ghz
    Logic Pro 7.4.7
    Mac OS X 10.4.7

    Vinyl 1.7.3 loaded and ran fine on my system. Try removing the AU and any supporting files and receipts and re-installing Vinyl again.
    And, yes, Vinyl is UB (don't know what possessed a13 to ponder otherwise).
    jord

  • Has anyone got a Sony EX3 to work in this program?

    Has anyone got a Sony EX3 to work in this program?

    yep,
    there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
    set your loops up in individual exs insts
    transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
    now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
    you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
    if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
    you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
    my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
    my way will work though.

  • I have a 15 inch mac book pro running osx 10.5.8. I recently moved to FL and switched to Comcast (only option). Now when I access one of my banks, I can get past the login page and the opening page of my account but the data is unavailable. Bank no help.

    I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.

    Harden your Mac against malware attacks

  • Has Anyone gotten the Intelligent Agent to work???

    I have Oracle installed and all is well except for a few minor
    problems that I think the Intelligent Agent will solve. Has
    anyone gotten this to work on RedHat 6.0 with Oracle
    Enterprise Edition 8.0.5.1??? I was able to get it to work
    under Oracle8 SE, but I need EE for the ConText Cartridge.
    I have gotten to the point where I can get the dbsnmp process
    running, but OEM cannot talk to it.
    Please help
    --Bryan
    null

    I'm having the same problem. Does anyone out there have a
    solution?
    I am running RedHat Linux 6.0 straight out of the box. The only
    change I made was to set the kernel parameters according to the
    release notes and recompile the kernel.
    P.S. Oracle deserves our thanks for providing free developer
    licenses to so many of its products, but this is the buggiest
    install I've ever seen in my 12 years of working with their
    products. Didn't anyone from Oracle test the install? This
    problem and the zero length libnjni8.so file are the real
    doozies.
    I've followed the release notes and installation guide to the
    letter and have found several documentation / distribution bugs
    that should have leapt out at the first person who tried it.
    Thorsten Khnemann (guest) wrote:
    : Bryan Batchelder (guest) wrote:
    : : anyone else who could not get it to compile with TCL 7.5 to
    : : please at least let me know other people are having the same
    : : problem.
    : Same problem here, the
    : "gmake -f ins_oemagent.mk agent" gives the message
    : "gcc: unrecognized option
    : `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
    : of unresolved references.
    : Tested on RedHat 6.0, egcs 1.1.2
    null

  • Has anyone gotten the Digi 002 to work on Mavericks?

    Has anyone gotten the Digi 002 rack to work on OSX Mavericks?
    I know it says '002 rack and console are not supported (untested)' according to Avid's site, but I was curious if anyone has got it to run.
    I am currently using Logic Pro 9 with it right now under OSX 10.8.5, but would like to upgrade my OS. (Logic Pro X is out until I can find a reliable 32 bit bridge for all of my plugs.)
    Thnaks in advance.

    the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
    heere is the note they sent - but some of the urls dont resolve
    Jaff said:
    If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
    http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
    Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
    http://www.whatismyip.com/
    Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
    http://portforward.com/english/applications/port_forwarding/Splasht...

  • Has anyone actually got one these to work

    I'm not be flip.
    I bought an Airport Extreme Base Station and it works like a charm. But I can not even get through the utility to get the Express to work.
    At first it would go to the end and then I'd get a message saying an error had occured and the Express could not be found. I'd reset it.
    After two or three times of this nonsense the unit disappeared for good. Resetting it does no good -- my Mac simply can't find it.
    I bought an Express when they first came out and could not get it to work -- even after hours on the phone with Apple.
    But here we are two or three years later and the units still don't work.
    Honestly, has anyone ever gotten one of these to work?

    Well, you can close this thread. Apple can't help and the product just doesn't work.
    Connecting to the Express kills all Internet access forcing me to reboot. The, once rebooted I can no longer connect to the Express.
    After all these years you would have thought they would have gotten this right.
    For God's sake take this lousy product off the market.

  • Has anyone gotten X Plane 10 to work on a MACBook Pro?

    I'm trying to get X Plane 10 running on Windows 7. The MacBook Pro is a 2012 purchase new. Has anyone succeded in accomplishing that?
    I read that the most common failures are with the graphics drivers. Tried to update NVIDIA's latest driver but it failed to load.
    I also read that Apple uses a costomized chip set and it only works witih mac drivers? Is this true.
    I know that X-Plane comes with a OS X version, but most of the add on's are in Windows. The specific add on was for a Cessna 208B. We are working with one of  the shipping companies to assess the pheasability of making the C208B a true robot.
    Thanks

    The 3D graphics on X-Plane 10 are very intense, you will need massive power.
    If you can find a copy of X-Plane 9, it will run fine on a MBP running an i7 duocore 2,and at least 4GB of ram.
    It works fine on mine.
    Also contact the X-Plane developers, as I have found them to be helpful in the past.
    http://www.x-plane.com/support/landing/

  • Has anyone got there Nokia Email system working ?

    I have the default email on my E71 working fine but the interface is nowhere near as nice as the Nokia one.
    Unfortunately the Nokia one simply does not work as most people are finding.
    Has anyone actually got this working properly and if you have, how ?

    Based on your reply i tried it again, anyway, less than 24hours into it, it has failed me again, cant send or recive.
    Looks like back to the standard one.
    I bought the E71 for many reasons email being a main one, wish i had a Blackberry now as this is ridiculous and the blackberry one seems to work flawlessly 
    Cant believe Nokia cant even get there own email system working on there own phones. Quite ridiculous !!
    Paul

  • Anyone get Sharp AL-1655cs MFP working with the IMac

    Has anyone got the required drivers or workaround to get the Sharp Al-1655cs printer working with iMac or Macbook Pro.  Ive been searching and have yet to find a MAC OS compatible driver but am wondering if someone has figured out a way to make it work?

    you say no application
    the way I normally scan is that I go into system preferences
    click print & scan
    there on the lidt of pritners he show my samsung all in one laser pritner thingy
    then I click on the Scan in the right tabcontrol click open Scanner
    that bring up what I assume to be a samsung gui dialog where I can preview and set dpi and the likes
    then when I click scan it scan and send the image to Preview (the app called priview)
    have you tried it that way rather then trying to access the scanner from other apps ?
    back in the day scanners used a system called TWAIN which was not IP network related prob not even usb
    some old apps or strange apps could still be looking for a wired system using that interface

Maybe you are looking for