Has anyone got a MBP without speaker distortion?

I sent in my MBP for repair because of the speaker distortion, but looking around the board it seems like its a problem that apple cannot fix? Should I bother sending it to applecare again?? The difference is pretty big and I am suprised that apple would be okay with it. It renders my speakers practically useless as it just sounds horrible. Thanks.

Yep. One of the reasons I switched to the Pro from the MacBook was the low volume of the MacBook. Now I have more volume but distortion. Still it's better to hear that than nothing at all (though this doesn't go the same for crappy music
If you turn the bass down in the EQ, it should help a little.

Similar Messages

Has ANYONE got a 'faulty' superdrive to work without replacing it?

There are many tales of people here with dodgy sauperdrives. Now I have one in a 2 year old eMac. So before I spend money replacing the superdrive, has anyone got their's going by way of software or cleaning or dancing around their Mac chanting to the sky?
Steve

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has anyone got NVrotate to work under Win98SE?

I installed the latest driver for this card for Win98
NVrotate is not available as an option in Win98SE
Display properties-->settings -->GeForce FX5200
I temporarily moved a drive with WinXP Pro onto this machine.
NVrotate is an available option in
Display properties-->settings -->GeForce FX5200
and works fine.
But for various compatibility reasons this machine has to been running Win98SE.
Has ANYONE got NVrotate to work under Win98 ??????
MSI FX5200 TD128
Gigabyte GA-7VAX
AMD 2400+
17" Analog LCD & 18.1" Analog LCD

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got Python to work on the N96???

Has anyone got Python to wok on the N96?
I have downloaded and installed the latest edition 3rd 1.4.4 i think. it goes on the phone without any problems.
However when trying to use app that use python specifically pyPiow at the moment the app goes on the phone but nothing happens when i try to open it!
is it somthing i am doing wrong, where go i install the pictures, or the apps for that matter, can the apps go on the mass memory where they are now or do they have to go on the very small phone memory?!
does current python work at all on the n96
has anyone had any joy?
please help!
cheers

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Has anyone got iFS working in Tomcat ?

iFS 1.1.9
We have a urgent need to get iFS running in a Servlet 2.2 container and OC4J does not support iFS yet. I know this is not supported but has anyone got iFS working in Tomcat ? If so, pls do me a BIG favour by letting me have your config files, such as
- server.xml
- <tomcat home>\conf\web.xml
- web.xml for the tomcat context)
- wrapper.properties (if you are using tomcat as an NT service)
- tomcat-apache.conf (or equivalent)
- <oracle home>/apache/apache/conf/httd.conf
- A listing of relevant environment variables (by doing a "set>env.lis" or similar)
- and any other files you might think is relevant
Thanks a million in advance.
null

iFS 1.1.9 / Oracle 8.1.7 / Tomcat 4.0.1 / Windows 2000
After several hours of fiddling around with the configuration
files, I finally got the iFS up and running on my test machine.
Briefly here's what I did:
1) create application directories
<tomcat_home>/ifs/files/WEB-INF/classes
<tomcat_home>/ifs/files/WEB-INF/lib
2) Add the following to <tomcat_home>/conf/server.xml:
<Context path="/ifs/files" docBase="ifs/files"
debug="0" reloadable="true">

<Environment name="ORACLE_HOME" type="java.lang.String"
value="oracle_home"/>
<Environment name="ORACLE_SID" type="java.lang.String"
value="sid"/>
<Environment name="LD_LIBRARY_PATH" type="java.lang.String"
value="oracle_home/lib:oracle_home/ctx/lib"/>
<Environment name="NLS_LANG" type="java.lang.String"
value=".UTF8"/>
</Context>
Please replace oracle_home with your installation directory and
fill in your SID as well.
3) create <tomcat_home>/<tomcat_home>/ifs/files/WEB-INF/web.xml
with the following definitions:
<servlet>
<servlet-name>oracle-jsp</servlet-name>
<servlet-class>oracle.jsp.JspServlet</servlet-class>
<init-param>
<param-name>logVerbosityLevel</param-name>
<param-value>WARNING</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>oracle-ifs-servlet</servlet-name>
<servlet-
class>oracle.ifs.protocols.dav.impl.IfsDavServlet</servlet-class>
<init-param>
<param-name>classpath</param-name>

<param-value>
tomcat_home/webapps/ifs/files/WEB-INF/lib/ojsp.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/webui.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/adk.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/http.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/repos.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/email.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/release.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/utils.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/settings.jar;
tomcat_home/webapps/ifs/files/WEB-INF/classes;
tomcat_home/lib/xmlparserv2.jar;
tomcat_home/lib/classes12.jar;
tomcat_home/common/lib/servlet.jar;
</param-value>
</init-param>
<init-param>
<param-name>ifs.dav.servicepassword</param-name>
<param-value>manager</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>page_provider</param-name>
<param-
value>oracle.ifs.protocols.dav.impl.jsp.IfsJspResourceProvider</p
aram-value>
</init-param>
<init-param>
<param-name>page_repository_root</param-name>
<param-value>ifs_home/ifsjsps</param-value>
</init-param>
<init-param>
<param-name>unsafe_reload</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>oracle-ifs-servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>oracle-jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
tomcat_home and ifs_home must be replaced with your installation
directories.
4) Copy the iFS and Oracle JARs to the locations specified in
web.xml
You may choose either the applications lib directory or the more
general tomcat_home/lib for that purpose.
One hint on libraries: Tomcat will ignore ZIP files, you have to
use JAR. I renamed Oracle's classes12.zip to classes12.jar for
that reason.
5) Create settings.jar
This was the most tricky part. I packed everything under
ifs_home/settings into the file settings.zip, renamed this to
settings.jar and moved it to the WEB-INF/lib directory. Seems a
bit of a kludge to me, anyone with a better solution is welcome.
6) Start tomcat
7) try http://yourtomcathost:8080/ifs/files/index.html
You should see the ifs login screen then.
One word about the application environment. In this
configuration every user class has to go into
<tomcat_home>/ifs/files/WEB-INF/classes, the
ifs_home/user_classes is of no use here. And don't try to set
the classpath within catalina.bat, tomcat will completely ignore
this setting.
Finally, I know that this environment is not supported but as
long as the iFS servlet meets the standards, every standard
compliant servlet engine should do the job.
Good luck

Has anyone got a quick start manual like this?

Hi all,
I recently bought a refurb Macbook Air 11 (2013) from the australian apple store and I noticed that the quick start guide that I had was not on the apple store. Whats more, it says that my macbook air has a thunderbolt 2 port! Has anyone got one like this? Note the copyright 2014 on the right. Is this the actual quick start guide?

Thanks for reply Demo. What I mean by 'failed' is nothing happened when I hit the 'Verify Now' box on the email from Apple in my Inbox I expected to move to another page to enter further details but that didn't happen and there was no message saying 'verification accepted' or similar. I spoke to Apple Support and after about an hour she advised me to speak to a friend. If my friend can solve this, Apple needs to give her a job. Thanks again.

Has anyone got a clue how to solve this conundrum?

Just bought ipad air. Entered ID details. Received email on my PC. Checked 'Verify Now' box. Link failed. Repeated over 50 times. All failed. Has anyone got a clue how to solve this conundrum? The wife is tearing her hair out and ranting on about litigation.

Thanks for reply Demo. What I mean by 'failed' is nothing happened when I hit the 'Verify Now' box on the email from Apple in my Inbox I expected to move to another page to enter further details but that didn't happen and there was no message saying 'verification accepted' or similar. I spoke to Apple Support and after about an hour she advised me to speak to a friend. If my friend can solve this, Apple needs to give her a job. Thanks again.

Has anyone got UCM 11g running on Windows 7 64bit?

Hi,
I've just installed UCM 11g on a 64bit Windows 7. During installation I had some issues concerning the user rights, but now almost everything works fine.
Except of two issues:
1. when starting the UCM (startManagedWebLogic.cmd) I get the following exception:
!csNativeOsUtilsError!syNativeOsUtilsNotLoaded!syJavaExceptionWrapper,java.lang.UnsatisfiedLinkError: intradoc.common.NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
java.lang.AssertionError: !syNativeOsUtilsNotLoaded
     at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:386)
     at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:352)
     at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:26)
But the server is running.
2. Fulltext-Search doesn't work.
Message in the UI:
!csUserEventMessage,weblogic,localhost:16200!$!csSearchUnableToReturnResults
intradoc.common.ServiceException: !csSearchUnableToReturnResults
at intradoc.server.SearchManager.retrieveSearchInfo(SearchManager.java:269)
at intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1811)
at intradoc.server.SearchService.doLocalSearch(SearchService.java:1360)
at intradoc.server.SearchService.getSearchResults(SearchService.java:654)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
As UCM is not certified for Windows 7 I'm not sure if this is a configuration issue or a generel problem with Windows 7.
Has anyone got this installation run on Windows 7 (64bit)?
bye Stephan...

Assuming that you want to install the 64 bit UCM 11g version:
Issue with installer closing screen could be related with JAVA_HOME variable or wrong java version.
1. Check if 64 bit JDK (not JRE) is installed in a directory without spaces (not default Program Files… but something like C:\Java\).
2. Check if windows environment variable JAVA_HOME exists and is pointing to JDK directory (like C:\Java\jdk1.6.0_24)
3. Open command prompt and check java version with: java –version. It should return “Java HotSpot 64-Bit Server”.
A little bit more deatils here: Re: Installation issues with WebCenter UCM 11g
Regards,
Boris

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it sti

Hi
I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it still has the same problem.
Cheers
Rachel

Hi Rachel,
You can follow the article: App doesn't open | Progress wheel spins continually to get your issue fixed.
Let us know if the issue still persists or not.
Regards,
Ratandeep Arora

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Has anyone got elisa running?

has anyone got elisa running?
i've installed now elisa for the 3-4 time in ~one year and it's still not running. at least i get now the shiny start menu, but when i choose video, music, etc entry and then a directory it simply does nothing and gives out tons of debug errors/messages. and yes, i ugraded to the latest plugins package. don't trust shiny things...
vlad
ps: ??? the youtube plugin seems to work ... no it doesn't: i get this strange error "Message: don't know how to handle video/x-h264". though i have _all_ gstreamer-{ugly,dirty,good,evil}-plugins installed.
elisa is made for the ubuntu people. should it then just simply work? hmm
Last edited by DonVla (2008-07-15 19:19:05)

wonder wrote:there are missing dependency: pil and python-pysqlite.
extra/python-pysqlite-legacy 1.0.1-4 [installed]
A Python DB-API 2.0 interface for the legacy SQLite 2
extra/python-pysqlite 2.3.5-1 [installed]
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
extra/pil 1.1.6-4 [installed]
Python imaging library
all installed....
btw: i don't get the packaging policy for elisa: why is there elisa and elisa-plugins? and why is elisa a dep for elisa-plugins and not the other way round? the install file says: "PLEASE NOTE: elisa-plugins package is needed at elisa to work". hence it's a dependency...
Last edited by DonVla (2008-07-15 19:24:55)

Has anyone got a MBP without speaker distortion?

Similar Messages

Maybe you are looking for